Deutsch
EnglishMyKey for your Ford Focus 2010-2017
MyKey™
•
Driver assist features, if equipped on
PRINCIPLE OF OPERATION
MyKey allows you to program keys with
restricted driving modes to promote good
driving habits. All but one of the keys can
be activated with these restricted modes.
Any keys that remain unprogrammed are
referred to as administrator keys or admin
keys. They can be used to:
your vehicle, are forced on: parking aid
and Blind Spot Information System
(BLIS) with cross traffic alert.
•
•
Satellite radio adult content
restrictions, if equipped on your vehicle.
Pre-collision assist and Lane Departure
warning switches on every ignition
cycle, but can be switched off by the
MyKey user.
•
•
•
Create a MyKey.
Program configurable MyKey settings.
Clear all MyKey features.
Configurable Settings
With an admin key, you can configure
certain MyKey settings when you first
create a MyKey and before you recycle the
key or restart the engine. You can also
change the settings afterward with an
admin key.
When you have created a MyKey, you can
access the following information by using
the information display to determine:
•
How many admin keys and MyKeys are
programmed to your vehicle.
•
A vehicle speed limit can be set.
Warnings will be shown in the display
followed by an audible tone when your
vehicle reaches the set speed. You
cannot override the set speed by fully
depressing the accelerator pedal or by
setting cruise control.
•
The total distance your vehicle traveled
with a MyKey.
Note: Switch the ignition on to use the
system.
Note: All MyKeys are programmed to the
same settings. You cannot program them
individually.
Note: For vehicles equipped with a
push-button start, when both a MyKey and
an admin key are present, the admin key will
be recognized by the vehicle when you start
the vehicle.
WARNING
Do not set MyKey maximum speed
limit to a limit that will prevent the
driver from maintaining a safe speed
considering posted speed limits and
prevailing road conditions. The driver is
always responsible to drive in accordance
with local laws and prevailing conditions.
Failure to do so could result in accident or
injury.
Non-configurable Settings
The following settings cannot be changed
by an admin key user:
•
•
Safety belt reminder. You cannot
disable this feature. The audio system
will mute when the front seat
passengers’ safety belts are not
fastened.
Early low fuel warning. The low-fuel
warning activates earlier, giving MyKey
users more time to refuel.
54
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
MyKey™
•
•
Various vehicle speed minders can be
CREATING A MYKEY
set. Once you select a speed, it will be
shown in the display, followed by an
audible tone when the preselected
vehicle speed is exceeded.
Use the information display to create a
MyKey:
1. Insert the key you want to program into
the ignition. If your vehicle is equipped
with a push-button start, place the
intelligent access transmitter into the
backup position. The location of your
backup position is in another chapter.
See Starting and Stopping the
Engine (page 118).
Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, the
speed-sensitive or compensated
automatic volume control will be
disabled.
Always on setting. When this is
selected, you will not be able to turn
off AdvanceTrac or traction control,
E911 or Emergency Assist, or the Do Not
Disturb feature (if your vehicle is
equipped with these features).
•
2. Switch the vehicle on.
3. Access the main menu through the
information display controls. Use the
arrow keys to get to the following menu
selections:
Message
Action and Description
Settings
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
MyKey
Create MyKey
Programming/Changing
Configurable Settings
Use the information display to access your
configurable MyKey settings by doing the
following:
When prompted, hold the OK button until
you see a message informing you to label
this key as a MyKey. The key will be
restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings.
1. Switch the vehicle on using an admin
key.
2. Use the arrow keys to get to the
following menu selections:
Message
Settings
Action and Description
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
MyKey
55
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
MyKey™
Note: You can clear or change your MyKey
CLEARING ALL MYKEYS
You can clear or change your MyKey
settings using the information display
control on the steering wheel. See
Information Displays (page 91).
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.
Note: When you make any changes to your
MyKey settings, you change the settings for
every MyKey. You cannot make individual
changes to apply to certain MyKeys.
Switch the ignition on using an admin key.
To clear all MyKeys of all MyKey settings, press the left arrow button to access
the main menu and scroll to:
Message
Action and Description
Press the OK button or the right arrow button.
Press the OK button or the right arrow button.
Settings
MyKey
Clear MyKey
Press and hold the OK button until the instrument cluster
displays the following message.
All MyKeys
Cleared
Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to
their original admin key status.
56
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
MyKey™
Number of MyKeys
CHECKING MYKEY SYSTEM
STATUS
Indicates the number of MyKeys
programmed to your vehicle. Use this
feature to detect how many MyKeys you
have for your vehicle and determine when
all MyKeys have been deleted.
You can find information about your
programmed MyKeys by using the
information display. See Information
Displays (page 91).
Number of Admin Keys
MyKey Distance
Indicates how many admin keys are
programmed to your vehicle. Use this
feature to determine how many admin
keys you have for your vehicle, and detect
if an additional MyKey has been
programmed.
Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to clear all MyKeys. If the distance does
not accumulate as expected, then the
intended user is not using the MyKey, or an
admin key user recently cleared and then
recreated a MyKey.
USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
MYKEY TROUBLESHOOTING
All Vehicles
Condition
Potential Causes
I cannot create a MyKey.
The key used to start the vehicle is not an admin key.
The key used to start the vehicle is the only key. There
always has to be at least one admin key.
The passive anti-theft system is not programmed to your
vehicle. See Passive Anti-Theft System (page 67).
I cannot program the
configurable settings.
The key used to start your vehicle is not an admin key.
There are no MyKeys programmed to your vehicle. See
Creating a MyKey (page 55).
I cannot clear the MyKeys.
57
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
MyKey™
Condition
I lost the only admin key.
I lost a key.
Potential Causes
Purchase a new key from an authorized dealer.
Program a spare key. See Passive Anti-Theft System
(page 67).
The MyKey distance does
not accumulate.
The MyKey is not being used by the intended user.
The MyKeys have been cleared and the MyKey system has
been reset.
Vehicles With Push-Button Start
Condition
Potential Causes
I cannot create a MyKey.
The transmitter is not in the backup position. See Keyless
Starting (page 118).
There are no MyKey driving An admin key is present when you switch the ignition on.
modes.
There are no MyKeys programmed to your vehicle. See
Creating a MyKey (page 55).
58
Focus (CDH) Canada/United States of America, HM5J 19A321 AA enUSA, Edition date: 201608, First Printing
