Deutsch
EnglishInstruments -> Lighting dimmer for your Peugeot 3008 2016-2023
Instruments
the road speed must be displayed in the local
country’s official unit (km/h or mph).
The unit is changed via the screen
configuration menu, with the vehicle
stationary.
Manual test on the
instrument panel
This function allows you, at any time, to check
certain indicators and to display the alerts log.
Instrument panel lighting
dimmer
Allows the instrument panel lighting to be
switched on or off.
1
► Press this button.
Total distance recorder
This recorder measures the total distance
travelled by the vehicle since its initial
registration.
The brightness of the instrument panel lighting is
adjusted using the touch screen.
► With the engine running, briefly press this
button.
The following information is displayed on the
instrument panel:
With PEUGEOT Connect Radio
► Press this button to select the
Settings menu.
► Select "Brightness".
– Engine oil level.
– Next service due.
– Driving range associated with the AdBlue® and
the SCR system (BlueHDi Diesel).
– Current alerts.
Trip distance recorder
This measures the distance travelled since it was
last reset by the driver.
► Adjust the brightness by pressing the
arrows or moving the slider.
This information is also displayed
automatically every time the ignition is
switched on.
The settings are applied immediately.
► Press outside the settings window to exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
Distance recorders
► Select "Dark".
With the ignition on, the distances are
permanently indicated. They are deactivated
about 30 seconds after switching the ignition
off. They are displayed when the driver's door
is opened, and when the vehicle is locked or
unlocked.
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
Resetting the trip recorder
► With the ignition on, press the button until
zeros appear.
With PEUGEOT Connect Nav
With the lamps switched on:
► Press this button to select the
Settings menu.
When travelling abroad, you may have to
change the distance units (km or miles):
► Select "OPTIONS".
21
Instruments
► Select "Screen configuration".
Definitions
► Select the "Brightness” tab.
► Adjust the instrument panel and
screen brightness by using the arrows or
moving the slider.
Range
(miles or km)
Distance that can still be travelled with the
fuel remaining in the tank (based on the
average fuel consumption over the last few miles
(kilometres) travelled).
This value may vary following a change in driving
style or terrain, leading to a significant change in
current fuel consumption.
When the range falls below 19 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the range
is recalculated and is displayed if it exceeds 62
miles (100 km).
► Press this button to save and exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
► Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
► Select "Turn off screen".
– Current information:
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
• Total range (Petrol or Diesel).
• Current consumption (Petrol or Diesel).
• Stop & Start time counter (Petrol or Diesel).
• Percentage of the current journey travelled
in all-electric driving mode (Rechargeable
hybrid).
If dashes instead of figures continue to be
displayed while driving, contact a PEUGEOT
dealer or a qualified workshop.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
– Trips "1" then "2":
• Average speed.
Current consumption
(mpg or l/100 km or km/l)
• Average fuel consumption.
• Distance travelled.
Data displayed on the
instrument panel
Trip computer data is displayed permanently
when the "TRIP COMPUTER" or "PERSONAL"
display mode is selected, depending on version.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
Display of the different tabs
Calculated during the last few seconds.
Trip reset
This function is only displayed at speeds above
19 mph (30 km/h).
► When the desired trip is displayed,
press the button on the end of the wiper
control stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
in the same way.
Average consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer
reset.
22
