Deutsch
EnglishInstruments -> Indicators for your Peugeot 3008 2016-2023
Instruments
Black/white warning lamps
The value indicated is calculated
according to the distance covered and
the time elapsed since the last service.
The alert may also be triggered close to a
due date.
1
Automatic gearbox or Electric automatic
gearbox (e-EAT8) (Rechargeable hybrid)
Fixed.
The automatic gearbox is locked.
You must press the Unlock button to unlock it.
Service spanner
eSave function (Rechargeable hybrid)
Fixed, accompanied by the reserved
electric range.
On temporarily when the ignition is
switched on.
Between 620 and 1,860 miles (1,000 and 3,000
km) remain before the next service is due.
Fixed, when the ignition is switched on.
The next service is due in less than 620
miles (1,000 km).
► Press and hold the button located on the end
of the wiper control stalk.
► Switch on the ignition; a temporary display
window appears and a countdown begins.
► When the display indicates =0, release the
button; the spanner disappears.
The eSave function is activated.
Indicators
Have your vehicle serviced very soon.
Service indicator
The servicing information is expressed in terms
of distance (miles or kilometres) and time
(months or days).
The alert is given at whichever of these two
terms is reached first.
The servicing information is displayed in the
instrument panel. Depending on the version of
the vehicle:
– The distance recorder display line indicates
the distance remaining before the next service
is due, or the distance travelled since it was due
preceded by the "-" sign.
– An alert message indicates the distance
remaining, as well as the period before the next
service is due or how long it is overdue.
Service spanner flashing
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least 5 minutes for the reset to be
registered.
Flashing then fixed, when the
ignition is switched on.
(With BlueHDi Diesel engines, associated with
the Service warning lamp.)
The servicing interval has been exceeded.
Have your vehicle serviced as soon as possible.
Reminder of the servicing information
You can access the servicing information at any
time.
Resetting the service indicator
The service indicator must be reset after each
service.
If you have serviced your vehicle yourself:
► Switch off the ignition.
► Press the trip distance recorder reset button.
The servicing information is displayed for a few
seconds, then disappears.
Engine oil level indicator
(Depending on version)
17
Instruments
On versions fitted with an electric gauge, the
engine oil level status is displayed on the
instrument panel for a few seconds when
the ignition is switched on, after the servicing
information, in the form of messages.
For more information on Checking levels,
refer to the corresponding section.
For more information on Checking
levels, refer to the corresponding
section.
Coolant temperature
indicator
AdBlue® range indicators
(BlueHDi)
The Diesel BlueHDi engines are equipped with
a system that associates the SCR (Selective
Catalytic Reduction) emissions control system
and the Diesel particle filter (DPF) for the
treatment of exhaust gases. They cannot
function without AdBlue® fluid.
When the level of AdBlue® falls below the
reserve level (between 1,500 and 0 miles (2,400
and 0 km)), a warning lamp lights up when
the ignition is switched on and an estimate
of the distance that can be travelled before
engine starting is prevented is displayed in the
instrument panel.
The level read will only be correct if the
vehicle is on level ground and the engine
has been off for more than 30 minutes.
Low oil level
This is indicated by the message "Oil
level incorrect" on the instrument panel,
accompanied by the lighting of the Service
warning lamp and an audible signal.
If a low oil level is confirmed by a check using
the dipstick, the level must be topped up to avoid
damage to the engine.
With the engine running:
For more information on Checking levels, refer
to the corresponding section.
– In zone A, the temperature is correct.
– In zone B, the temperature is too high.
The associated warning lamp and the
STOP warning lamp light up in red on the
instrument panel, accompanied by the display of
a message and an audible signal.
You must stop the vehicle as soon as it is
safe to do so.
Oil gauge malfunction
The engine starting prevention system
required by regulations is activated
automatically once the AdBlue® tank is empty.
It is then no longer possible to start the
engine until the minimum level of AdBlue® has
been topped up.
This is indicated by the message "Oil level
measurement invalid" on the instrument panel.
Consult a PEUGEOT dealer or a qualified
workshop.
In the event of a malfunction of the
electric gauge, the oil level is no longer
monitored.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located in the engine compartment.
Wait a few minutes before switching off the
engine.
Manual display of driving range
After switching off the ignition, carefully
open the bonnet and check the coolant
level.
While the driving range is greater than
1,500 miles (2,400 km), it is not displayed
automatically.
18
Instruments
Malfunction of the SCR emissions
control system
Warning/
indicator
lamps on
Action
Remaining
range
1
► Press this button to temporarily display the
driving range.
Malfunction detection
Top up as
soon as
possible.
Between
500 miles
and 62
miles (800
km and
If a malfunction is detected,
Actions required related to a lack of
AdBlue®
these warning lamps come
on, accompanied by an
audible signal and the
display of an "Emissions
control fault" message.
The following warning lamps light up when the
quantity of AdBlue® is below the reserve level:
driving range of 1,500 miles (2,400 km).
Together with the warning lamps, messages
regularly remind you of the need to top up to
avoid engine starting being prevented. Refer to
the Warning and indicator lamps section for
details of the messages displayed.
100 km)
A top-up is
vital, there is
a risk that the
engine will
be prevented
from starting.
Between 62
miles and 0
miles (100
km and 0
km)
The alert is triggered while driving when the
fault is detected for the first time, and thereafter
when switching on the ignition for subsequent
journeys, for as long as the cause of the fault
persists.
For more information on AdBlue®
(BlueHDi) and in particular on topping
up, refer to the corresponding section.
If the fault is temporary, the alert
disappears during the next journey, after
self-diagnostic checks of the SCR emissions
control system.
To be able
0 miles (km)
to restart the
engine, add at
least 5 litres of
AdBlue® to the
tank.
Warning/
indicator
lamps on
Action
Remaining
range
Malfunction confirmed during the
permitted driving phase (between 685
miles and 0 miles (1,100 km and 0 km))
Top up.
Between
1,500 miles
and 500
If the fault indication is still displayed
permanently after 31 miles (50 km) of driving, the
fault in the SCR system is confirmed.
The AdBlue warning lamp flashes and
a message is displayed ("Emissions
control fault: starting prevented in X miles
(kms)"), indicating the driving range in miles or
kilometres.
miles (2,400
km and 800
km)
19
Instruments
While driving, the message is displayed every 30
seconds. The alert is repeated when switching
on the ignition.
You can continue driving for up to 685 miles
(1,100 km) before the engine starting
prevention system is triggered.
CHARGE Energy recovery for partly
recharging the traction battery.
The slider is located in this zone
during deceleration: taking your foot
off the accelerator pedal or braking.
Partial recharging of the battery by
energy recovery has no effect on the
charge level indicator.
Have it checked by a PEUGEOT dealer
or a qualified workshop.
Starting prevented
POWER High power demand, using the
combined capabilities of the petrol
engine and the electric motor(s)
(depending on version).
Every time the ignition is switched on, the
message "Emissions control fault: Starting
prevented" is displayed.
Charge level indicator
(Rechargeable hybrid)
To restart the engine
Contact a PEUGEOT dealer or a
qualified workshop.
The slider is located in this zone
during more dynamic driving phases
when high levels of performance are
being demanded.
ECO
Optimal use of energy (internal
combustion or electric).
Power indicator
(Rechargeable hybrid)
The power indicator shows in real time the power
demanded from the vehicle.
The slider is located in this zone
when driving under electric power
and when optimal use is being made
of the petrol engine, both accessible
by adopting a suitable driving style.
A symbol indicates the threshold at
which the petrol engine will restart.
The driver can therefore moderate
their acceleration to remain in electric
driving mode.
The charge level of the traction battery and
the remaining range in electric driving mode
are permanently displayed when the vehicle is
switched on.
There are 3 zones:
The range displayed depends on the use
of the vehicle (type of driving and speed),
the outside temperature and the activated
comfort equipment.
20
