Mobility -> Maintenance for your BMW 7 Series 2008-2014

Maintenance  
BMW Maintenance System  
Service and Warranty  
Information Booklet for US  
models and Warranty and  
Service Guide Booklet for  
Canadian models  
The maintenance system directs you to re‐  
quired maintenance measures and thereby sup‐  
ports you in maintaining road safety and the op‐  
erational reliability of the vehicle.  
Please consult your Service and Warranty Infor‐  
mation Booklet for US models and Warranty and  
Service Guide Booklet for Canadian models for  
additional information on service requirements.  
Condition Based Service CBS  
Sensors and special algorithms take into ac‐  
count the driving conditions of your vehicle.  
Based on this, Condition Based Service deter‐  
mines the maintenance requirements.  
Maintenance and repair should be performed by  
your service center. Make sure to have regular  
maintenance procedures recorded in the vehi‐  
cle's Service and Warranty Information Booklet  
for US models, and in the Warranty and Service  
Guide Booklet for Canadian models. These en‐  
tries are proof of regular maintenance.  
The system makes it possible to adapt the  
amount of maintenance you need to your user  
profile.  
Details on the service requirements, refer to  
page 81, can be displayed on the Control Dis‐  
play.  
Socket for OBD Onboard  
Diagnosis  
Service data in the remote control  
Information on the required maintenance is con‐  
tinuously stored in the remote control. Your  
service center will read out this data and suggest  
the right array of service procedures for your ve‐  
hicle.  
Therefore, hand your service specialist the re‐  
mote control that you used most recently.  
Storage periods  
Storage periods during which the vehicle bat‐  
tery was disconnected are not taken into ac‐  
count.  
There is an OBD socket on the driver's side for  
checking the primary components in the vehicle  
emissions.  
If this occurs, have a service center update the  
time-dependent maintenance procedures,  
such as checking brake fluid and, if necessary,  
changing the engine oil and the microfilter/acti‐  
vated-charcoal filter.  
Emissions  
The warning lamp lights up:  
Emissions are deteriorating. Have  
the vehicle checked as soon as pos‐  
sible.  
The warning lamp flashes under cer‐  
tain circumstances:  
258  
Online Edition for Part no. 01 40 2 606 497 - 03 11 490  
This indicates that there is excessive  
misfiring in the engine.  
Reduce the vehicle speed and have  
the system checked immediately;  
otherwise, serious engine misfiring  
within a brief period can seriously  
damage emission control compo‐  
nents, in particular the catalytic con‐  
verter.  
Fuel cap  
The indicator lamp lights up.  
If the fuel cap is not properly tightened,  
the OBD system may conclude that fuel  
vapor is escaping. If the cap is then tightened,  
the display should go out in a short time.  
Data memory  
Your vehicle records data relating to vehicle op‐  
eration, faults and user settings. These data are  
stored in the remote control and can be read out  
with suitable devices, particularly when the ve‐  
hicle is serviced. The data obtained in this way  
provide valuable information for service proc‐  
esses and repair or for optimizing and develop‐  
ing vehicle functions further.  
In addition, if you signed a service contract for  
Assist, certain vehicle data can be sent directly  
from the vehicle to facilitate the desired serv‐  
ices.  
259  
Online Edition for Part no. 01 40 2 606 497 - 03 11 490