Deutsch
EnglishNavigation -> Navigation system for your BMW X5 2007-2013
Navigation
Navigation system
Navigation system
2. Open "Options".
Vehicle equipment
3. "Navigation system version"
Information is displayed on the data version.
This chapter describes all series equipment as
well as country-specific and special equipment
offered for this model series.Therefore, it also
describes equipment that may not be found in
your vehicle, for instance due to the selected
special equipment or the country version. This
also applies to safety-related functions and sys‐
tems.
Updating the navigation data
General information
Navigation data are stored in the vehicle and can
be updated.
Current navigation data and the authorization
code are available from your service center.
General information
▷
Depending on the data volume, a data up‐
date may take several hours.
The navigation system can determine the pre‐
cise position of the vehicle, with the aid of sat‐
ellites and vehicle sensors, and can reliably
guide you to every entered destination.
▷
▷
Update during the trip to preserve battery.
During the update, only the basic functions
of the navigation system are available.
Entries in stationary vehicle
▷
▷
The status of the update can be viewed.
Enter data only when the vehicle is sta‐
tionary, and always give priority to the applicable
traffic regulations in the event of any contradic‐
tion between traffic and road conditions and the
instructions issued by the navigation system.
Failure to take to this precaution can place you
in violation of the law and put vehicle occupants
and other road users in danger.◀
After the updating process is complete, the
system restarts.
▷
Remove the medium with the navigation
data after the update.
Performing an update
1. Insert the navigation DVD into the DVD
player with the labeled side facing up.
2. Follow the instructions on the Control Dis‐
play.
Opening the navigation system
1.
2. "Navigation"
The navigation system can also be called
up directly using the button on the con‐
troller.
Press the button on the controller.
3. Enter the authorization code of the naviga‐
tion DVD.
4. Change the DVD if necessary.
After the trip is interrupted, follow the instruc‐
tions on the Control Display.
Viewing the status
1. Open "Options".
2. "Navigation update"
Navigation data
Information on navigation data
1. "Navigation"
162
Navigation system
Navigation
Removing navigation DVD
1.
Press button 1.
The DVD emerges slightly from the drive.
2. Remove the DVD.
163
