Entertainment -> DVD system in rear for your BMW X5 2007-2013

DVD system in rear  
Entertainment  
DVD system in rear  
Vehicle equipment  
Controls  
This chapter describes all series equipment as  
well as country-specific and special equipment  
offered for this model series.Therefore, it also  
describes equipment that may not be found in  
your vehicle, for instance due to the selected  
special equipment or the country version. This  
also applies to safety-related functions and sys‐  
tems.  
General information  
With the DVD system in the rear you can play  
CDs and DVDs with audio, video and image data.  
The DVD system can also play data from at‐  
tached external audio and video devices. Audio  
output is possible both via headphones and via  
the vehicle speakers.  
You can control the DVD system using the but‐  
tons on the CD-/DVD player or using the remote  
control.  
1
2
3
4
5
Display screen  
Infrared interface for headphones  
CD/DVD player  
Some functions are operated using the remote  
control.  
Headphone connection: jack plug  
12 V socketsꢀꢁ139  
Enabling DVD system  
The DVD system can be enabled via iDrive.  
Folding in display screen  
When using the ski bag or when transporting  
bulky pieces of luggage, the display screen  
should be folded in, as otherwise it may be dam‐  
aged.  
1. "Settings"  
2. "Allow rear control"  
3. "Rear DVD system active"  
Note when the display screen is folded  
down  
When the screen is folded down, do not open  
the lid of the center armrest or rest your arm on  
the screen; otherwise, you may damage the  
screen.◀  
215  
Entertainment  
DVD system in rear  
Turn: right headphone volume and vehicle  
volume  
Connecting headphones  
You can connect headphones with a jack plug or  
operate them using the infrared interface.  
To enable optimal use of the infrared interface,  
use infrared headphones that comply with the  
IEC 61603-2 standard.  
1. Turn the display screen, arrow 1  
The display screen switches off.  
2. Fold down the display screen, arrow 2.  
Compatible infrared headphones and informa‐  
tion about supported headphones are available  
at your service center.  
The display screen is folded out in the reverse  
order.  
When using infrared headphones, it is important  
not to interrupt the infrared connection between  
the headphones and the infrared interface. This  
means that no obstacle should come between  
the two and that the cover of the infrared inter‐  
face should not be covered or scratched. Un‐  
favorable lighting conditions such as glare from  
outside can interfere with reception.  
CD/DVD player  
Controls  
Remote control  
1
Press: switch the DVD system on/off  
Turn: left headphone volume and vehicle  
volume  
2
3
Eject CD/DVD  
Beginning of track  
Stop  
1
2
3
Menu navigation  
Volume for headphones with jack plug  
Playback, pause, freeze frame  
Next track  
Changing track or chapter during CD-, DVD-  
or AUX playback, fast forward/rewind  
4
5
CD/DVD slot  
4
5
Headphones right/left  
Connectors for external device: cinch sock‐  
ets  
Open start menu for DVD system  
6
Press: switch the DVD system on/off  
216  
DVD system in rear  
Entertainment  
Menu navigation  
You can use the thumbwheel and buttons 1 to  
navigate through the menus.  
Sound output via speakers  
In addition to the headphones, you can also play  
the sound via the vehicle speakers.  
Turn the thumbwheel: select a menu item.  
1. "CD/Multimedia"  
2. "External devices"  
3. "AUX rear"  
Press the arrow buttons: change between  
fields.  
Press the button: activate the menu item.  
4. "Volume"  
Changing batteries  
5. Turn the controller until the desired volume  
is set and press the controller.  
Switching DVD system on/off  
Press the button on the CD-/DVD player or un‐  
der the desired screen.  
The DVD system switches on automatically  
when a CD or DVD is inserted.  
1. Press the detent and remove the cover.  
2. Change the batteries. The type and instal‐  
lation position are marked on the bottom of  
the battery compartment.  
Playing CD/DVD  
Use the following menu items to access data  
from a CD/DVD:  
3. Close the cover.  
Video data via "DVD"  
Audio data via "CD"  
Images "Photo"  
Take the used battery to a recycling cen‐  
ter or to your service center.  
Setting the language of the  
DVD system  
1. Select a CD/DVD track.  
2.  
Press the button.  
3. Select "Tone".  
4.  
Press the button.  
5. Switch to the top window.  
6. Select "Language".  
7.  
8. Select the desired language.  
9. Press the button.  
Press the button.  
217  
Entertainment  
DVD system in rear  
Video CDs (VCDs) and Super Video CDs  
(SVCDs) can only be played if they do not have  
a DVD-specific menu.  
Playing videos from CDs/  
DVDs  
Country codes of DVDs  
Eject CD/DVD  
Your DVD player only plays DVDs with the cod‐  
ing of your home region, e.g., Europe=2. The  
country codes supported by your DVD are con‐  
tained in the information on your DVD.  
Press the button on the CD/DVD player. The  
DVD emerges slightly from the drive.  
DVD control  
An overview of the coding zones:  
Code Region  
WiththeDVDcontrol, youcanselectthetitleand  
chapter, open the DVD-specific menu, and op‐  
erate functions such as Language, Fast forward  
and Reverse or Freeze frame.  
1
2
USA, Canada  
Japan, Europe, Middle East, South Af‐  
rica  
A DVD can briefly deactivate functions of the  
DVD control, under certain circumstances while  
the entire DVD is being played. It is not possible  
to operate the DVD control under these circum‐  
stances. In this case, try to make the selection  
using the DVD-specific menu.  
3
4
Southeast Asia  
Australia, Central and South America,  
New Zealand  
5
6
Northwest Asia, North Africa  
China  
1.  
Press the button on the remote control  
during playback.  
DVDs with the code 0 can be played on all devi‐  
ces.  
Starting playback  
1. Push the CD/DVD into the drive with the la‐  
beled side facing upward. The CD/DVD is  
automatically pulled in.  
Playback begins automatically after a  
few seconds.  
2. Press the  
buttons on the remote control  
or turn the thumbwheel to select the desired  
function.  
Otherwise: select "DVD".  
2. If the DVD control or the DVD-specific menu  
is displayed when a DVD is inserted, use the  
remote control buttons for menu navigation  
to select the desired option.  
3.  
Press the button.  
Symbol Function  
Exit DVD control  
Or:  
"SET"  
Settings for playing DVDs.  
Start playback.  
Press the button on the CD/DVD player.  
You can control the playback with the buttons  
on the CD/DVD player or the DVD control.  
Stop playback.  
218  
DVD system in rear  
Entertainment  
3.  
Press the button on the CD/DVD player.  
Fast forward/reverse is interrupted. The  
DVD will start play at the point selected.  
Symbol Function  
Activate and deactivate freeze  
frame.  
Skipping chapter  
Skip a chapter.  
You can change to the next or previous chapter  
during playback.  
Fast forward/reverse.  
"Menu" Open the DVD-specific menu.  
1.  
Press the button on the remote control  
during playback.  
The DVD control disappears again after a short  
time if you have not selected a function.  
2.  
3.  
Select the symbol.  
Press the button repeatedly, continuing  
until you reach the desired chapter.  
Or:  
Press the button on the remote control to  
exit the DVD control.  
Or:  
Press the button on the left or right on the  
remote control repeatedly until you reach the  
desired chapter.  
Fast forward/reverse  
Forward/reverse with DVD control  
Freeze frame  
1.  
Press the button on the remote control  
during playback.  
Select the symbol.  
1.  
Press the button on the remote control  
during playback.  
2.  
3.  
4.  
Press the button.  
Press the button several times to in‐  
crease the fast forward/reverse speed.  
The DVD playback will be distorted.  
To cancel fast forward/reverse:  
1.  
Select the symbol.  
Press the button.  
2.  
2.  
3.  
Select the symbol.  
Press the button.  
Or:  
Press the button on the CD/DVD player. The  
DVD will start play at the point selected.  
To continue playback:  
1. Select the or  
2. Press the button.  
As an alternative, you can also stop and continue  
symbol.  
Forward/reverse with remote control  
Press and hold the button until you reach  
the desired point.  
playback with the  
player.  
button on the CD/DVD  
Or:  
1. During playback, turn the thumbwheel. Fast  
forward/reverse is interrupted.  
2. Continue to turn the thumbwheel. The  
speed is increased.  
219  
Entertainment  
DVD system in rear  
ferent camera angles. These are usually only  
briefly available.  
Making settings for DVD  
1.  
Press the button during playback.  
"Menu": open the DVD-specific menu.  
"Return": exit the menu, or:  
Press the buttons on the remote con‐  
trol.  
Many DVDs offer dialogs and subtitles in various  
languages or scene descriptions for the hearing  
impaired. These functions are stored on the  
DVD.  
With some DVDs, it is only possible to select  
language, subtitles, camera angle, or title by us‐  
ing the DVD-specific menu. Consult the infor‐  
mation accompanying your DVD.  
2. Make the settings with the remote control:  
"Video settings":  
"Brightness", "Color", and "Contrast"  
on the screen.  
Opening the DVD-specific menu  
After switching to the top window, you  
can change other settings.  
Additional functions may be available on DVDs.  
It is thus possible, for example, to select from  
among several possible actions or to access in‐  
formation about the film.  
"Language": the system language of the  
DVD system  
"Display": background brightness of the  
screen.  
1.  
Press the button on the remote control  
during playback.  
2. Select "Menu".  
"Tone":  
"Treble / Bass" and "Balance": sepa‐  
3. Press the button.  
rately adjustable for the left and right  
headphones and the infrared head‐  
phones.  
On some DVDs, you can use "Main menu"  
and "Title" to access additional menus in  
which you can select music scenes, for ex‐  
ample.  
"Reset": the settings are reset to the de‐  
fault values.  
To make a selection:  
"DVD format":  
"Standard"  
1.  
2.  
Select the symbol.  
"Zoom": full-screen playback.  
Press the button until the desired func‐  
tion is selected.  
"Language": language of the DVD playback.  
The language advances one setting each  
time the menu item is selected.  
3. Select the  
4. Press the button.  
To return to the start menu:  
1. Select the arrow.  
2. Press the button.  
arrow.  
"Subtitles": language of the subtitles or turn  
off the subtitles.  
"Title": select individual tracks on the DVD.  
"Angle of view": camera angle.  
You can also select language, subtitles, camera  
angle, or title in the DVD-specific menu. Consult  
the information accompanying your DVD.  
Information or symbols that appear during  
the playback of a film generally point out dif‐  
220  
DVD system in rear  
Entertainment  
Compressed video files  
Playback functions  
1. Select a track.  
Playback  
1. Select the directory if necessary.  
2.  
Press the button.  
3. Select a menu item:  
"Pause": stop and continue playback.  
"Repeat track": repeat the selected  
track.  
"Repeat directory": repeat the tracks in  
the current directory.  
4.  
Press the button.  
2.  
Press the button.  
Playing audio tracks from CD/  
DVD  
3. Select a track.  
Starting playback  
Push the CD/DVD into the drive with the labeled  
side facing upward. The CD/DVD is automati‐  
cally pulled in.  
Playback begins automatically after a few  
seconds.  
Otherwise: select "CD".  
Press the button.  
4.  
Press the button.  
CDs/DVDs with compressed audio files, refer to  
page 223, can take approx. 1 minute to read,  
depending on their directory structure.  
5. Select "Play".  
6.  
Press the button.  
To play back audio tracks from a DVD, refer to  
Compressed audio files, refer to page 223.  
To change the directory:  
1. Select the directory.  
To start playback if a CD is already in the drive:  
1. Open the start menu with the remote con‐  
trol.  
2. Select "CD".  
2.  
Press the button.  
221  
Entertainment  
DVD system in rear  
3.  
Press the button.  
2.  
Press the button.  
As an alternative, you can also control the play‐  
back with the buttons on the CD/DVD player.  
3. Make the settings with the remote control:  
"Tone":  
To eject CD/DVD:  
"Treble / Bass" and "Balance": sepa‐  
rately adjustable for the left and right  
headphones and the infrared head‐  
phones.  
Press the button on the CD/DVD player.  
Selecting a track  
"Reset": the settings are reset to the de‐  
fault values.  
Buttons on CD/DVD player  
Press the button for the corresponding  
direction repeatedly until you reach the desired  
track.  
"Pause": stop and continue playback.  
"Random": the CD tracks are played back  
once in random sequence.  
Playback begins at the start of the track.  
"Scan": brief samples of all CD tracks are  
automatically played one after another.  
Using the remote control  
"Repeat": repeat the current track. Select  
again to end.  
Press the button for the corresponding  
direction repeatedly or turn the thumbwheel un‐  
til you reach the desired track.  
To exit from the menu:  
Press the buttons on the remote control.  
Playback begins at the start of the track.  
Fast forward/reverse  
Buttons on the CD/DVD player:  
Press and hold the button for the cor‐  
responding direction.  
Settings and playback functions for  
audio CDs  
1. Select "SET".  
222  
DVD system in rear  
Entertainment  
Compressed audio files  
Settings and playback functions for  
compressed audio files  
Playback  
1. Select a track.  
1. Select the directory if necessary.  
2.  
Press the button.  
3. Make the settings with the remote control:  
"Tone":  
"Treble / Bass" and "Balance": sepa‐  
rately adjustable for the left and right  
headphones and the infrared head‐  
phones.  
"Reset": the settings are reset to the de‐  
fault values.  
"Pause": stop and continue playback.  
2.  
Press the button.  
"Scan directory": briefly sample the tracks  
in the current directory.  
3. Select a track.  
"Scan all": briefly sample all tracks.  
"Random directory": play the tracks in the  
current directory in a random sequence.  
"Random all": play all tracks in a random se‐  
quence.  
"Repeat track": repeat the selected track.  
"Repeat directory": repeat the tracks in the  
current directory.  
4.  
Press the button.  
"Details": display any stored information on  
the current track.  
5. Select "Play".  
6.  
Press the button.  
To exit from the menu:  
To change the directory:  
Press the buttons on the remote control.  
1. Select the directory.  
Displaying images from CD/  
DVD  
1. Push the CD/DVD into the drive with the la‐  
beled side facing upward. The CD/DVD is  
automatically pulled in.  
2. Open the start menu with the remote con‐  
trol.  
3. Select "Photo".  
2.  
Press the button.  
4.  
Press the button.  
223  
Entertainment  
DVD system in rear  
Displaying overview  
Adjusting  
1. Select the subdirectory if necessary.  
2. Select "Overview".  
1.  
Press the button.  
2. Select a menu item:  
3.  
Press the button.  
Symbol  
"SET"  
Function  
It may take some time until the overview is com‐  
pletely displayed.  
Return to the photo menu.  
Adjust the "Display".  
If a symbol appears instead of an image, the im‐  
age cannot be displayed in the overview.  
"Language": after switching to  
the top window, the system lan‐  
guage can be changed.  
Displaying images  
1. Use the buttons or the thumbwheel of the  
remote control to select an image.  
Start the slide show.  
2.  
Press the button.  
Display the first/last image of the  
current directory.  
Rotate the image by 90°.  
"Overview" Change to the image overview.  
Ending display  
1.  
2.  
3.  
Press the button.  
Select the symbol.  
Press the button.  
3. Displaying images:  
Scroll using the menu navigation but‐  
tons of the remote control.  
Eject CD/DVD  
Press the button on the CD/DVD player.  
Display the slide show: turn the thumb‐  
wheel to set the display duration of the  
images.  
Stop the slide show: select "Stop".  
224  
DVD system in rear  
Entertainment  
Dual-sided DVDs available from retail suppliers  
are coated on both sides and bear no markings.  
This means both sides are information carriers.  
To play the information on the other side, turn  
over the DVD.  
Information on CD/DVD  
player  
Safety notes  
Do not remove the cover  
Supported formats  
The BMW CD/DVD player is a Class 1 laser  
product. Do not operate if the cover is damaged;  
otherwise, severe eye damage can result.◀  
Depending on the compression method used,  
not all files of the specified formats can be  
opened.  
Suitable media  
Images  
Use of CDs/DVDs  
JPEG/JPG.  
Do not use self-recorded CDs/DVDs  
with labels applied, as these can be‐  
come detached during playback due  
to heat buildup and can cause irrepar‐  
able damage to the device.  
With very large image files, it can take longer for  
the images to be displayed.  
Compressed audio files  
MP3.  
WMA.  
OGG.  
AAC.  
Only use round CDs/DVDs with a standard  
diameter of 4.7 in/12 cm and do not play  
CDs/DVDs with an adapter, e.g., single CDs;  
otherwise, the CDs or the adapter may jam  
and no longer eject.  
Do not use combined CDs/DVDs, e.g., DVD  
Plus, as the CDs/DVDs can jam and will no  
longer eject.◀  
Compressed video files  
SVCD.  
MPEG1.  
The CD/DVD player can play the following me‐  
dia:  
MPEG2.  
MPEG4/DivX.  
Video DVD.  
CD-DA (audio CD).  
Digital Rights Management (DRM)  
CDs/DVDs with compressed image data.  
CDs/DVDs with compressed audio data.  
CDs/DVDs with compressed video data.  
In some cases, it may not be possible to play  
CDs/DVDs with integrated Digital Rights Man‐  
agement (DRM).  
The DVD player does not support DVD audio.  
However, many audio DVDs available in stores  
also contain a video track in the DVD Video for‐  
mat in addition to the audio track. These DVDs  
can be played back by the DVD player. Refer to  
the information on your DVD to determine  
whether your audio DVD contains an additional  
video track. Depending on the authoring used, it  
is possible that not all functions are available  
during playback.  
General malfunctions  
CD/DVD changers and players have been  
optimized for performance in vehicles. In  
some instances they may be more sensitive  
to faulty CDs/DVDs than stationary devices  
would be.  
If a CD/DVD cannot be played, first check  
whether it has been inserted correctly.  
225  
Entertainment  
DVD system in rear  
Foreign bodies/liquids in the CD/DVD slot  
CDs/DVDs with compressed audio files  
Make sure that no foreign objects or liq‐  
uids get into the CD/DVD slot; otherwise, the  
CD/DVD player will be damaged.◀  
If the language set for the CD/DVD player does  
not match the language of the music track, the  
music tracks may be displayed incorrectly.  
Humidity  
External device  
High levels of humidity can lead to condensation  
on the CD/DVD or the laser's scan lens, and  
temporarily prevent playback.  
Connecting  
Malfunctions involving individual CDs/  
DVDs  
If malfunctions occur only with particular CDs/  
DVDs, this can be due to one of the following  
causes.  
Copied or self-recorded CDs/DVDs  
Possible reasons for malfunctions with  
home-recorded CDs/DVDs are inconsistent  
data creation or recording processes, or  
poor quality or old age of the blank CD/DVD.  
1
2
Connections for audio/video cables. Watch  
the colors of the sockets when connecting.  
Yellow socket: video  
Only label CDs/DVDs on the upper side with  
a pen intended for this purpose.  
White socket: audio on left  
Red socket: audio on right  
Power supply for external device: socket  
with removable cap.  
Damaged CDs/DVDs  
Avoid fingerprints, dust, scratches and  
moisture.  
Playback  
Store CDs/DVDs in a sleeve.  
1. Switch on the external device and start the  
playback.  
Do not subject CDs/DVDs to temperatures  
over 122 ℉/50 ℃, high humidity or direct  
sunlight.  
2. Open the start menu with the remote con‐  
trol.  
CDs/DVDs with copy protection  
3. Select "AUX".  
CDs/DVDs are often provided with a copy pro‐  
tection feature by the manufacturer. As a result,  
some CDs/DVDs cannot be played, can only be  
played to a limited degree, or cause the system  
to switch off. In this case, wait a short while and  
then switch the system back on again. Then re‐  
move the CD/DVD from the drive.  
4.  
Press the button.  
226  
DVD system in rear  
Entertainment  
For devices without a video signal, for instance  
MP3 players, "No video signal" appears on the  
display. The sound is nevertheless played.  
"Display": background brightness of the  
screen.  
"Video Format":  
"Standard"  
Settings for external devices  
"Zoom": full-screen playback.  
1.  
Press the button during playback.  
To exit from the menu:  
Press the buttons on the remote control.  
2. Make the settings with the remote control:  
"Video settings":  
"Brightness", "Color", and "Contrast" of  
the video playback.  
"NTSC color": the color can be adjusted  
on an external device with the NTSC  
standard.  
"Standard": the DVD system can be  
adapted to external devices with differ‐  
ent TV standards; to do so, consult the  
operating manual of the external device.  
"Reset": the settings are reset to the de‐  
fault values.  
"Tone":  
"Treble / Bass" and "Balance": sepa‐  
rately adjustable for the left and right  
headphones and the infrared head‐  
phones.  
"Reset": your settings are reset.  
After switching to the top window, you  
can change other settings.  
"Audio": adjust the volume of the exter‐  
nal device to the volume of the CD/DVD  
player.  
"Language": the system language of the  
DVD system.  
227