Opening and closing -> Power windows for your BMW i8 2014-2020

Opening and closing  
CONTROLS  
When carrying the vehicle key, touch the sen‐  
sor surface, refer to page 71, before the door  
opener button.  
Closing  
Pull the switch to the resistance point.  
The window closes while the switch is being  
held.  
Power windows  
Safety information  
Warning  
Pull the switch beyond the resistance  
point.  
The window closes automatically if the door  
is closed. Pulling again stops the motion.  
Closing via Comfort Access, refer to page 72.  
Jam protection system  
Concept  
When operating the windows, body parts and  
objects can be jammed. There is a risk of injury  
or risk of damage to property. Make sure that  
the area of movement of the windows is clear  
during opening and closing.  
The jam protection prevents objects or body  
parts becoming jammed between the door frame  
and window while a window is being closed.  
Overview  
General information  
If resistance or a blockage is detected while a  
window is being closed, the closing action is in‐  
terrupted.  
The window opens slightly  
Safety information  
Power windows  
Warning  
Accessories on the windows such as antennas  
can impact jam protection. There is a risk of in‐  
jury. Do not install accessories in the area of  
movement of the windows.  
Opening  
Press the switch to the resistance point.  
The window opens while the switch is being  
held.  
Closing without the jam protection  
system  
In case of danger from the outside or if ice might  
prevent normal closing, proceed as follows:  
Press the switch beyond the resistance  
point.  
The window opens automatically. Pressing  
the switch again stops the motion.  
1.  
Pull the switch past the resistance point  
and hold it there.  
Convenient opening with the vehicle key, refer to  
page 63.  
79  
Online Edition for Part no. 01402914089 - X/19  
Opening and closing  
CONTROLS  
The window closes with limited jam protec‐  
tion. If the closing force exceeds a specific  
threshold, closing is interrupted.  
2.  
Pull the switch past the resistance point  
again within approx. 4 seconds and hold it  
there.  
The window closes without jam protection.  
80  
Online Edition for Part no. 01402914089 - X/19