Deutsch
EnglishBMW eDRIVE -> Energy-saving driving for your BMW i8 2014-2020
BMW eDRIVE
AT A GLANCE
electric motor supports the combustion engine.
For this purpose, the electric motor is supplied
by the high-voltage battery.
When exerting gentle pressure on the brakes,
the vehicle is only braked by the electric motor.
When the brake pedal is depressed further, the
brake system is activated additionally. This is
why only part of the brake energy is used to
charge the high-voltage battery when exerting
firm pressure on the brake.
Electric driving: ePOWER
Under certain conditions, refer to page 96, the
vehicle is powered only by the electric motor.
The mark in the instrument cluster is located
within the CHARGE range.
Variable drive configuration
Sensible driving and early speed reduction are
important to make full use of the energy recovery
feature.
The electric motor drives the front axle and the
combustion engine the rear axle. Depending on
the operating condition, the vehicle has the op‐
tions of front-wheel drive, rear-wheel drive or
combined for four-wheel drive.
Display
Follow the instructions for electric driving
eDRIVE, refer to page 96, driving with the com‐
bustion engine DRIVE, refer to page 98, and
driving stability, refer to page 148.
The displays of the hybrid system, refer to
page 112, provide information about the current
state of the drive and show the system activity in
a chart.
Acoustic pedestrian protection
Energy-saving driving
Depending on the country-specific version, the
system generates a continuous driving noise
during electric driving at low speeds.
To store energy while driving, read the following
descriptions:
Before driving
Driving with the combustion engine:
POWER
The combustion engine provides the drive power
to move the vehicle. If required, the high-voltage
battery is charged at the same time.
eDRIVE allows use of the air conditioner even
before driving off. The stationary climate control,
refer to page 169, provides more range than us‐
ing full air conditioning while driving.
Parked vehicle ventilation during the charging
process can provide maximum range when driv‐
ing off.
The hybrid system always starts the combustion
engine automatically.
Energy recovery: CHARGE
During driving
The high-voltage battery is charged while driving
through energy recovery.
▷ General driving tips, refer to page 189, for in‐
creasing the range.
The electric motor acts as a generator and con‐
verts the kinetic energy of the vehicle into electri‐
cal energy.
▷ Use the eDRIVE system efficiently, refer to
page 182, for an optimized driving style.
▷ ECO PRO driving mode, refer to page 190,
for increasing the range.
Charging can take place in various situations
while the vehicle is in motion:
▷ Display of hybrid system utilization, refer to
page 113.
▷ When the vehicle is rolling if the accelerator
pedal is not pressed.
▷ Information on saving fuel, refer to page 189,
for reducing fuel consumption.
▷ During vehicle braking.
58
Online Edition for Part no. 01402914089 - X/19
BMW eDRIVE
AT A GLANCE
After the trip
▷ Charge vehicle, refer to page 192, and plan
next trip.
▷ Prepare for long downtimes, refer to
page 238.
BMW Connected App
The Connected app provides mobility-based
services and applications.
Safety of the hybrid system
Follow the information on safety, refer to
page 60.
Long-term vehicle storage
Observe the information on vehicle storage and
for longer idle periods, refer to page 238.
59
Online Edition for Part no. 01402914089 - X/19
