Displays -> Selection lists for your BMW i8 2014-2020

Displays  
CONTROLS  
If Speed Limit Info is switched on, it can be dis‐  
played on the Info Display in the instrument clus‐  
ter.  
When passing buses or trucks with a speed  
sticker.  
If the traffic signs are non-conforming.  
When traffic signs that are valid for a parallel  
road are detected.  
Display  
During calibration of the camera immediately  
after vehicle delivery.  
Speed Limit Info  
Current speed limit.  
Selection lists  
General information  
Speed Limit Info not available.  
Depending on your vehicle's equipment, the fol‐  
lowing can be displayed or operated using the  
buttons and the thumbwheel on the steering  
wheel and via the displays in the instrument clus‐  
ter and the Head-up Display:  
Speed Limit Info can also be displayed in the  
Head-up Display.  
Current audio source.  
Phone redial.  
Turn on voice activation system.  
System limits  
The system may not be fully functional and may  
provide incorrect information in the following sit‐  
uations:  
It also displays programs of the Driving Dynamics  
Control.  
Activating a list and adjusting the  
setting  
In heavy fog, wet conditions, or snowfall.  
When traffic signs are fully or partially con‐  
cealed by objects, stickers or paint.  
When driving very close to the vehicle in front  
of you.  
When driving toward bright lights or strong  
reflections.  
When the windshield in front of the interior  
mirror is fogged over, dirty or covered by a  
sticker, etc.  
In the event of incorrect detection by the  
camera.  
On the right side of the steering wheel, turn the  
thumbwheel to activate the corresponding list.  
If the speed limits stored in the navigation  
system are incorrect.  
1. Turn the thumbwheel and select the desired  
setting.  
In areas not covered by the navigation sys‐  
tem.  
2. Press the thumbwheel.  
When roads differ from the navigation, such  
as due to changes in road routing.  
122  
Online Edition for Part no. 01402914089 - X/19  
Displays  
CONTROLS  
Miles.  
Display  
Average consumption, fuel.  
Current consumption, fuel.  
Average consumption, electric.  
Current consumption, electric.  
Average speed.  
Date.  
Speed Limit Info.  
Time of arrival.  
Depending on the equipment version, the list in  
the instrument cluster may differ from the illus‐  
tration.  
Distance to destination.  
Selecting information  
You can select what information from the On‐  
board Computer is to be displayed on the Info  
Display of the instrument cluster.  
Onboard Computer  
Via iDrive:  
Concept  
1. "My Vehicle"  
The Onboard Computer displays different vehi‐  
cle data in the instrument cluster, such as aver‐  
age values.  
2. "iDrive settings"  
3. "Displays"  
4. "Instrument panel"  
5. Select the desired setting.  
Calling up information on the Info  
Display  
Display in the instrument cluster  
The information from the Onboard Computer is  
shown in the lower left area of the instrument  
cluster.  
Information in detail  
Total range  
The total range considers the  
contents of the fuel tank as well  
as the electric energy in the high-  
voltage battery.  
Press the button on the turn signal lever.  
Information is displayed in the Info Display of the  
instrument cluster. Pressing the button repeat‐  
edly displays additional information.  
Average consumption  
Information at a glance  
The average consumption is calculated on the  
basis of various distances. Periods when the ve‐  
Repeatedly pressing the button on the turn sig‐  
nal lever calls up the following information in the  
Info Display:  
123  
Online Edition for Part no. 01402914089 - X/19