Wheels and tires -> Repairing a flat tire for your BMW X4 2014-2018

Mobility  
Wheels and tires  
Rotating wheels between axles  
Changing run-flat tires  
Different wear patterns can occur on the front  
and rear axles depending on individual driving  
conditions. The tires can be rotated between  
the axles to achieve even wear. Further infor‐  
mation is available from a dealer’s service cen‐  
ter or another qualified service center or repair  
shop. After rotating, check the tire pressure  
and correct, if needed.  
For your own safety, only use run-flat tires. No  
spare tire is available in the case of a flat tire.  
A dealer’s service center will be glad to answer  
additional questions at any time.  
Repairing a flat tire  
Rotating the tires between the axes is not per‐  
missible on vehicles with different tire sizes or  
rim sizes on the front and rear axles.  
Safety measures  
Park the vehicle as far away as possible  
from passing traffic and on solid ground.  
Switch on the hazard warning system.  
Storage  
Secure the vehicle against rolling away by  
setting the parking brake.  
Store wheels and tires in a cool, dry place with  
as little exposure to light as possible.  
Turn the steering wheel until the front  
wheels are in the straight-ahead position  
and engage the steering wheel lock.  
Always protect tires against all contact with oil,  
grease and fuels.  
Do not exceed the maximum tire inflation pres‐  
sure indicated on the side wall of the tire.  
Have all vehicle occupants get out of the  
vehicle and ensure that they remain out‐  
side the immediate area in a safe place,  
such as behind a guardrail.  
Run-flat tires  
If necessary, set up a warning triangle at an  
appropriate distance.  
Label  
Mobility System  
Concept  
With the Mobility System, minor tire damage  
can be sealed temporarily to enable continued  
travel. To accomplish this, sealant is pumped  
into the tires, which seals the damage from the  
inside.  
RSC label on the tire sidewall.  
The compressor can be used to check the tire  
inflation pressure.  
The wheels consist of tires that are self-sup‐  
porting, to a limited degree, and possibly spe‐  
cial rims.  
General information  
The support of the sidewall allows the tire to  
remain drivable to a restricted degree in the  
event of a tire inflation pressure loss.  
Follow the instructions on using the Mobi‐  
lity System found on the compressor and  
sealant container.  
Follow the instructions for continued driving  
with a flat tire.  
208