Deutsch
EnglishSettings -> Seat and mirror memory for your BMW X4 2014-2018
Controls
Settings
Overview
1. Raise the head restraint up against the re‐
sistance.
2. Press button, arrow 1, and pull the head re‐
straint out completely.
Storing
1. Switch on the ignition.
2. Set the desired position.
Seat and mirror memory
3.
Press button. The LED in the but‐
ton lights up.
Concept
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
Two driver's seat and exterior mirror positions
can be stored per profile and called up. Set‐
tings for the backrest width and lumbar sup‐
port are not stored in memory.
Button was pressed inadvertently:
Press button again.
The LED goes out.
Safety information
WARNING
Calling up settings
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is a
risk of an accident. Only retrieve the memory
function when the vehicle is stationary.◀
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
WARNING
While driving, the seat position adjustment on
the driver's side is interrupted after a short
time.
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
property damage. Make sure that the area of
movement of the seat is clear prior to any ad‐
justment.◀
Calling up of a seat position
deactivated
After a brief period, calling up stored seat posi‐
tions is deactivated to save battery power.
To reactivate calling up of a seat position:
▷
▷
▷
Open or close the door or tailgate.
Press a button on the remote control.
Press the Start/Stop button.
58
