Deutsch
EnglishSettings -> Rear head restraints for your BMW X4 2014-2018
Settings
Controls
▷
▷
Do not hang objects, e.g., clothes hangers,
directly on the head restraint.
Adjusting the height
Only use accessories that have been de‐
termined to be safe for attachment to a
head restraint.
▷
Do not use any accessories, e.g., pillows,
while driving.◀
Correctly adjusted head restraint
General information
A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in the event
of an accident.
▷
▷
To raise: push the head restraint up.
To lower: press button, arrow 1, and push
head restraint down.
Removing
The head restraints cannot be removed.
Height
Adjust the head restraint so that its center is
approximately at eye level.
Rear head restraints
Adjusting the height
Safety information
WARNING
A missing protective effect due to re‐
moved or not correctly adjusted head re‐
straints can cause injuries in the head and
neck area. There is a risk of injury. Install head
restraints on occupied seats prior to driving
and make sure that the center of the head re‐
straint supports the back of the head at eye
level.◀
▷
▷
To raise: push the head restraint up.
To lower: press button, arrow 1, and push
head restraint down.
WARNING
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is clear
when moving the head restraint.◀
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
WARNING
Objects on the head restraint reduce the
protective effect in the head and neck area.
There is a risk of injury.
▷
Do not use seat or head restraint covers.
57
Controls
Settings
Overview
1. Raise the head restraint up against the re‐
sistance.
2. Press button, arrow 1, and pull the head re‐
straint out completely.
Storing
1. Switch on the ignition.
2. Set the desired position.
Seat and mirror memory
3.
Press button. The LED in the but‐
ton lights up.
Concept
4. Press selected button 1 or 2 while the LED
is lit. The LED goes out.
Two driver's seat and exterior mirror positions
can be stored per profile and called up. Set‐
tings for the backrest width and lumbar sup‐
port are not stored in memory.
Button was pressed inadvertently:
Press button again.
The LED goes out.
Safety information
WARNING
Calling up settings
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is a
risk of an accident. Only retrieve the memory
function when the vehicle is stationary.◀
The stored position is called up automatically.
Press selected button 1 or 2.
The procedure stops when a switch for setting
the seat or one of the memory buttons is
pressed.
WARNING
While driving, the seat position adjustment on
the driver's side is interrupted after a short
time.
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of
property damage. Make sure that the area of
movement of the seat is clear prior to any ad‐
justment.◀
Calling up of a seat position
deactivated
After a brief period, calling up stored seat posi‐
tions is deactivated to save battery power.
To reactivate calling up of a seat position:
▷
▷
▷
Open or close the door or tailgate.
Press a button on the remote control.
Press the Start/Stop button.
58
