Interior equipment -> Sun visor for your BMW X4 2014-2018

Interior equipment  
Controls  
4. Likewise, press and hold the button of the  
desired function on the hand-held trans‐  
mitter.  
idly. All stored functions will be deleted. The  
functions cannot be deleted individually.  
5. Release both buttons as soon as the inte‐  
rior mirror LED flashes more rapidly. The  
LED flashing faster indicates that the but‐  
ton on the interior mirror has been pro‐  
grammed. The system can then be con‐  
trolled by the button on the interior mirror.  
Sun visor  
Glare shield  
Fold the sun visor down or up.  
Glare shield from the side  
If the LED does not flash faster after at  
least 60 seconds, change the distance and  
repeat the step. Several more attempts at  
different distances may be necessary. Wait  
at least 15 seconds between attempts.  
Folding out  
1. Fold the sun visor down.  
2. Unhook it from the holder and swing it to  
the side.  
Canada: if programming with the hand-  
held transmitter was interrupted, hold  
down the interior mirror button and repeat‐  
edly press and release the hand-held  
transmitter button for 2 seconds.  
3. Move it back to the desired position.  
Folding up  
Proceed in the reverse order to close the sun  
visor.  
Operation  
WARNING  
Vanity mirror  
Body parts can be jammed when operat‐  
ing remote-controlled systems, e.g., the ga‐  
rage door, using the integrated universal re‐  
mote control. There is a risk of injury or risk of  
property damage. Make sure that the area of  
movement of the respective system is clear  
during programming and operation. Also follow  
the safety instructions of the hand-held trans‐  
mitter.◀  
A vanity mirror is located in the sun visor be‐  
hind a cover. When the cover is opened, the  
mirror lighting switches on.  
Ashtray/cigarette lighter  
Ashtray  
Opening  
The system, such as the garage door, can be  
operated using the button on the interior mirror  
while the engine is running or when the ignition  
is started. To do this, hold down the button  
within receiving range of the system until the  
function is activated. The interior mirror LED  
stays lit while the wireless signal is being  
transmitted.  
Deleting stored functions  
Press and hold the left and right button on the  
interior mirror simultaneously for approxi‐  
mately 20 seconds until the LED flashes rap‐  
Slide the cover forward.  
The ashtray can be inserted in the cup holder.  
167