Deutsch
EnglishDriving comfort -> Surround View for your BMW X4 2014-2018
Driving comfort
Controls
System limits
False warnings
The system may issue a warning under the fol‐
lowing conditions even though there is no ob‐
stacle within the detection range:
Safety information
WARNING
▷
▷
In heavy rain.
The system can react incorrectly or not
at all due to the system limits. There is a risk of
accidents or risk of property damage. Observe
the information regarding the system limits
and actively intervene, if needed.◀
When sensors are very dirty or covered
with ice.
▷
▷
▷
When sensors are covered in snow.
On rough road surfaces.
On uneven surfaces, such as speed
bumps.
Limits of ultrasonic measurement
Ultrasonic measurements might not function in
the following situations:
▷
In large buildings with right angles and
smooth walls, e.g., in underground ga‐
rages.
▷
▷
For small children and animals.
For persons with certain clothing, e.g.,
coats.
▷
▷
▷
In automatic vehicle washes.
Due to heavy exhaust.
▷
With external interference of the ultra‐
sound, e.g., from passing vehicles or loud
machines.
Due to other ultrasound sources, e.g.,
sweeping machines, high pressure steam
cleaners or neon lights.
▷
▷
When sensors are dirty, iced over, dam‐
aged or out of position.
If necessary, switch off automatic PDC activa‐
tion on obstacle detection, e.g., in vehicle
washes, to reduce false alarms.
Under certain weather conditions such as
high relative humidity, rain, snowfall, ex‐
treme heat or strong wind.
Malfunction
A Check Control message is displayed.
▷
With tow bars and trailer couplings of other
vehicles.
The range of the sensors is shown as a shaded
area on the Control Display.
▷
▷
▷
With thin or wedge-shaped objects.
With moving objects.
PDC has failed. Have the system checked.
With elevated, protruding objects such as
ledges or cargo.
Surround View
▷
▷
With objects with corners and sharp edges.
With objects with a fine surface structure
such as fences.
Concept
Surround View comprises various camera as‐
sistance systems that help the driver when
parking, maneuvering, and at complex exits
and intersections.
▷
▷
▷
For objects with porous surfaces.
If cargo protrudes.
Low objects already displayed, e.g., curbs,
can move into the blind area of the sensors
before or after a continuous tone sounds.
▷
▷
▷
Rearview camera, refer to page 146
Top View, refer to page 148.
Side View, refer to page 150.
145
Controls
Driving comfort
Camera
Rearview camera
Concept
The rearview camera provides assistance in
parking and maneuvering backwards. The area
behind the vehicle is shown on the Control
Display.
Safety information
WARNING
The camera lens is located in the handle of the
tailgate.
The system does not relieve from the
personal responsibility to correctly assess the
traffic situation. There is a risk of an accident.
Adjust the driving style to the traffic condi‐
tions. Watch traffic and vehicle surroundings
closely and actively intervene in the respective
situations.◀
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching on/off
Switching on automatically
Overview
The system is switched on automatically if se‐
lector lever position R is engaged when the en‐
gine is running.
Button in the vehicle
Automatic deactivation during forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Switching on/off manually
Press park assistance button.
Park assistance button
▷
▷
On: the LED lights up.
Off: the LED goes out.
The PDC is shown on the Control Display.
The rearview camera image is displayed when
the reverse gear is engaged when pressing the
park assistance button.
Switching the view via iDrive
With PDC activated or Top View switched on:
"Rear view camera"
The rearview camera image is displayed.
146
