Deutsch
EnglishDriving -> 2 Tronic Gearbox for your Peugeot 107 2005-2014
DRIVING
7
2 TRONIC GEARBOX
The five-speed "2 Tronic" gearbox
offers a choice between the comfort
of automatic operation or the pleas-
ure of manual gear changing.
Driving mode
Select the driving mode by moving
the gear lever.
Reverse "R". This gear will be en-
gaged when stationary or at a speed
below approximately 4 mph (6 km/h).
The switch to reverse gear is accom-
panied by an audible signal.
Neutral "N".
Position the lever to the right in posi-
tion N, to start the engine.
Driver information
The symbol which corresponds to the
selection, R, N, E or M and the number
of the gear engaged 1 to 5, are dis-
played on the instrument panel screen.
Starting the vehicle
With the handbrake applied, press
the brake pedal then select posi-
tion N to start the engine.
With your foot on the brake, select
position R, E or M.
Easy "E": automatic gear changing.
Manual (+/-) "M": manual gear chang-
ing.
Release the handbrake, take your
foot off the brake pedal, then accel-
erate.
Notes: with the engine run-
ning, in these three posi-
tions, an audible signal is
heard when the driver’s door
is opened.
You can change from position E to
position M and vice versa at any
time.
61
DRIVING
7
EASY mode (automatic mode)
Select position E using the gear
Stopping the vehicle
Operating fault
Before switching off the engine, you
can change to position N to be in
neutral.
In all cases, it is essential that you
apply the handbrake to immobilise
the vehicle.
With the ignition on, the
lever.
The gear engaged is displayed on
the instrument panel screen.
The gearbox continuously selects
the most suitable gear.
lighting of this warning light
indicates a gearbox mal-
function.
Contact a PEUGEOT dealer.
It is compulsory to press the
brake pedal while starting
the engine.
On a slope, use the brake to
immobilise the vehicle and
place the gear lever in posi-
tion N, E or R.
Do not keep the vehicle immobilised
using the accelerator.
Manuel mode
Place the gear lever in position M,
then change up or down through the
gears by pressing:
- rearwards, "+" to change up,
- forwards, "-" to change down.
The gear engaged is displayed on
the instrument panel screen.
Never select neutral N while
the vehicle is moving.
In all cases, it is essential to
apply the handbrake to im-
mobilise the vehicle.
In the event of under-revving, to
prevent any risk of stalling, the gear
below is selected automatically.
In the event of overheating of the
clutch, position N is selected auto-
matically and the symbol N flashes
accompanied by an audible signal.
62
