Deutsch
EnglishComfort -> Air Conditioning for your Peugeot 107 2005-2014
COMFORT
3
1. Air conditioning On/Off
With the engine running,
press the button, the indi-
cator light comes on.
The air conditioning will not
operate if the air flow adjustment
control 3 is in position 0.
2. Temperature adjustment
Turn the control from blue (cold) to
red (hot) to adjust the temperature to
suit your requirements.
3. Air flow adjustment
When the ignition is switched on,
turn the control to obtain a flow of
air which is sufficient to ensure your
comfort.
AIR CONDITIONING
1. Air conditioning On/Off
4. Air recirculation/Air intake
5. Air distribution adjustment
6. Rear screen demisting
To maintain a certain level of comfort
in the passenger compartment, avoid
position 0 whenever possible.
In position 0, a slight flow of air, due
to the movement of the vehicle, can
still be felt.
2. Temperature adjustment
3. Air flow adjustment
33
COMFORT
3
4. Air recirculation/Air intake
5. Air distribution adjustment
6. Rear screen demisting
The recirculation of interior
air (control 4 to the left) ena-
bles you to isolate the pas-
senger compartment from
exterior odours and smoke.
With the engine running,
press button 6, the indica-
tor light comes on.
Windscreen and side
windows.
The system demists the
rear screen.
It is switched off by pressing con-
Windscreen, side windows
and footwells.
Theintakeofexteriorair(con-
trol 4 to the right) enables you
to prevent and eliminate mist-
ing of the windscreen and
side windows.
trol 6.
Footwells.
Switch the system off as
soon as you consider this
necessary as a lower con-
sumption of current reduces
fuel consumption.
In a humid climate, use of the
air recirculation may cause
misting of the windows.
Footwells, diffusion grille
and side vents.
As soon as possible, move control 4
to the right to the "Intake of exte-
rior air" position to avoid the risks of
deterioration of the air quality and
misting of the windscreen and side
windows.
De-icing and demisting
To quickly de-ice or demist the wind-
screen and side windows:
Diffusion grille and side
vents.
- set the air distribution to "Wind-
screen and side windows",
- place the temperature control 2
and the air flow control 3 at maxi-
mum,
- close the side vents,
- place the air intake control 4 in the
"Air intake" position,
The air distribution can be
adjusted by placing the
control in an intermediate
position.
- switch on the air conditioning by
pressing button 1.
34
