Deutsch
EnglishFeatures -> Compass for your Honda CR-V 2011-2015
Compass
When you turn the ignition switch to ON (w*1, the compass self-calibrates, and the
1Compass
compass display appears.
Compass operation can be affected under the
following conditions:
•
•
•
Driving near power lines or stations
Crossing a bridge
object that can cause a magnetic disturbance
When accessories such as antennas and roof racks
are mounted by magnets
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
•
Models with one display
1. Turn the ignition switch to ON (w
2. Press and hold the SETUP button until the
display shows the compass setting menu.
.
1Compass Calibration
Calibrate the compass in an open area.
3. Rotate
to select Calibration, then press
Models with one display
.
While setting the compass:
•
•
The
button returns to the previous screen.
The SETUP button cancels the setting mode.
Compass Setting Menu Items
4. When the display changes to Calibration
Start, press
.
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
342
uuCompassuCompass Calibration
Models with two displays
1. Press the
button.
2. Select Settings.
3. Select System.
4. Select Compass.
5. Select Calibration.
6. Drive the vehicle slowly in two circles.
Compass Indicator
343
uuCompassuCompass Zone Selection
Compass Zone Selection
Models with one display
1Compass Zone Selection
1. Turn the ignition switch to ON (w
2. Press and hold the SETUP button until the
.
The zone selection is done to compensate the
variation between magnetic north and true north.
display shows the compass setting menu.
If the calibration starts while the audio system is in
use, the display returns to normal after the calibration
is completed.
3. Rotate
to select Zone, then press
.
The display shows the current zone
number.
4. Rotate
to select the zone number of
your area (See Zone Map), then press
.
Zone Number
Models with two displays
1. Press the
button.
2. Select Settings.
3. Select System.
4. Select Compass.
5. Select Zone.
6. Select the zone number of your area (See
Zone Map), then select OK.
Zone Number
344
uuCompassuCompass Zone Selection
Zone Map
2
15
10
14
3
13
4
12
11
5
9
6
8
7
Guam Island: Zone 8
Puerto Rico: Zone 11
345
