Deutsch
EnglishFeatures -> Bluetooth HandsFreeLink for your Honda CR-V 2011-2015
Bluetooth® HandsFreeLink®
Models with navigation system
1Bluetooth® HandsFreeLink®
See the Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.
To use HFL, you need a Bluetooth-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:
Models without navigation system
•
1-888-528-7876.
528-7876.
Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using
your vehicle's audio system, without handling your cell phone.
•
Models with one display
Voice control tips
Using HFL
•
Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphone.
HFL Buttons
■
•
Press and release the
call a number using a stored voice tag. Speak
clearly and naturally after a beep.
button when you want to
Volume up
Microphone
•
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
To change the volume level, use the audio system's
volume knob or the remote audio controls on the
steering wheel.
Volume down
Selector Knob
Pick-up
Button
State or local laws may prohibit the operation of
handheld electronic devices while operating a
vehicle.
Hang-up/Back Button
Talk Button
PHONE
Button
(Pick-up) button: Press to go directly to the Phone screen or to answer an
incoming call.
If you receive a call while using the audio system, the
system resumes its operation after ending the call.
(Hang-up/back) button: Press to end a call or to cancel a command.
(Talk) button: Press to call a number with a stored voice tag.
PHONE button: Press to go directly to the Phone screen.
Selector knob: Rotate
to select an item on the screen, then press
.
284
uuBluetooth® HandsFreeLink®uUsing HFL
1Bluetooth® HandsFreeLink®
HFL Status Display
■
Bluetooth® Wireless Technology
The i-MID notifies you when there is an
incoming call.
Bluetooth Indicator
Appears when your phone
is connected to HFL.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
Roam Status
Signal Strength
Battery Level Status
HFL Mode
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
1HFL Status Display
The information that appears on the i-MID varies
between phone models.
You can change the system language to English,
French, or Spanish.
Call Name
2 Customized Features P. 114
Limitations for Manual Operation
■
Certain manual functions are disabled or
inoperable while the vehicle is in motion. You
cannot select a grayed-out option until the
vehicle is stopped.
Only previously stored speed dial entries can
be called using voice commands while the
vehicle is in motion.
Disabled Option
2 Speed Dial P. 301
285
uuBluetooth® HandsFreeLink®uHFL Menus
Models with one display
HFL Menus
1HFL Menus
The ignition switch must be in ACCESSORY (q or ON (w to use HFL.
To use HFL, you must first pair your Bluetooth-
compatible cell phone to the system while the vehicle
is parked.
PHONE or
Phone
Speed Dial*1
Call History*1
Display your speed dial entry lists.
(up to 15 entries per paired phone)
Some functions are limited while driving. A message
appears on the screen when the vehicle is moving
and the operation is canceled.
Dialed Calls
Display the last 20
outgoing calls.
Received Calls
Missed Calls
Display the last 20
incoming calls.
Display the last 20
missed calls.
Phonebook*1
Dial*1
Display the paired phone’s phonebook.
Enter a phone number to dial.
*1:Appears only when a phone is connected to HFL.
286
uuBluetooth® HandsFreeLink®uHFL Menus
Redial*1
Redial the last number dialed in the phone’s history.
Select a message and
.
Text Message
Read/Stop reading
Reply
The message is
read aloud
System reads received message aloud, or
stop message from being read.
Reply to a received message using one
of six fixed phrases.
Call
Make a call to the sender.
Display Message
See an entire received message (if more
than three lines of text).
*1:Appears only when a phone is connected to HFL.
Continued
287
uuBluetooth® HandsFreeLink®uHFL Menus
Phone Setup
Connection
Add a New Phone
Connect a Phone
Disconnect Phone
Delete a Phone
Pair a phone to the system
Connect a phone to the system.
Disconnect a paired phone from the system.
Delete a previously paired phone.
Pairing Code
Create a code for a paired phone.
288
uuBluetooth® HandsFreeLink®uHFL Menus
Add New
Phonebook
Speed Dial*1
Select a phone number from the
phonebook to store as a speed dial number.
Call History
Select a phone number from the call history
to store as a speed dial number.
Phone Number
Enter a phone number to store as a speed
dial number.
Existing entry list
Change Speed Dial
Change a previously stored speed dial
number.
Delete Speed Dial
Store Voice Tag
Change Voice Tag
Delete Voice Tag
Delete a previously stored speed dial
number.
Create a voice tag for a speed dial number.
Change a voice tag for a speed dial number.
Delete a voice tag for a speed dial number.
*1:Appears only when a phone is connected to HFL.
Continued
289
uuBluetooth® HandsFreeLink®uHFL Menus
Auto Transfer
Caller ID Info
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle.
Name Priority
Prioritize the caller’s name as the caller ID.
Number Priority
Prioritize the caller’s phone number as the
caller ID.
Passcode*1
Create a security PIN for a paired phone.
Text Message Notice
Turn incoming text message notifications on or off.
System Clear
Clear the system of all paired phones, phonebook entries, and security
codes.
*1:Appears only when a phone is connected to HFL.
290
uuBluetooth® HandsFreeLink®uHFL Menus
1Phone Setup
Phone Setup
■
Your Bluetooth-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
■
To pair a cell phone (No phone has
been paired to the system)
1. Press the PHONE button or the
2. Rotate to select Yes, then press
button.
.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
3. Make sure your phone is in search or
discoverable mode, then press
.
•
•
Up to six phones can be paired.
Your phone's battery may drain faster when it is
connected to HFL.
u HFL automatically searches for a
Bluetooth device.
•
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and returns to idle.
4. When your phone appears on the list, select
it by pressing
.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following:
: The phone can be used with HFL.
: The phone is compatible with Bluetooth® Audio.
u If your phone doesn’t appear, select
Phone Not Found? and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink.
5. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
6. A notification appears on the screen if
pairing is successful.
Continued
291
uuBluetooth® HandsFreeLink®uHFL Menus
■
To pair a cell phone (when a phone has
already been paired to the system)
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
u If a prompt appears asking to connect to
a phone, select No and proceed with
step 2.
3. Rotate
to select Connection, then press
.
4. Rotate
to select Add a New Phone,
then press
.
u The screen changes to Select Location.
5. Rotate
to select Empty, then press
.
292
uuBluetooth® HandsFreeLink®uHFL Menus
6. Make sure your phone is in search or
discoverable mode, then press
.
u HFL automatically searches for a
Bluetooth device.
7. When your phone appears on the list, select
it by pressing
.
u If your phone doesn’t appear, select
Phone Not Found? and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink.
8. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
9. A notification appears on the screen if
pairing is successful.
Continued
293
uuBluetooth® HandsFreeLink®uHFL Menus
■
To change the pairing code setting
1To change the pairing code setting
1. Press the PHONE button or the
button.
The default pairing code is “0000” until you change
the setting.
2. Rotate
to select Phone Setup, then
To create your own, select Fixed, and delete the
current code, then enter a new one.
press
.
For a randomly generated pairing code each time you
pair a phone, select Random.
3. Rotate
.
4. Rotate
press
to select Connection, then press
to select Pairing Code, then
.
.
5. Rotate
press
to select Fixed or Random, then
294
uuBluetooth® HandsFreeLink®uHFL Menus
■
To delete a paired phone
1. Press the PHONE button or the
button.
to select Phone Setup, then
2. Rotate
press
.
u Repeat the procedure to select
Connection, then Delete a Phone.
3. Rotate
to select a phone you want to
delete, then press
.
4. A confirmation message appears on the
screen. Rotate
.
to select Yes, then press
u A notification appears if the deletion is
successful.
Continued
295
uuBluetooth® HandsFreeLink®uHFL Menus
1To Set Up a Text Message Notice Option
To Set Up a Text Message Notice Option
■
ON: A pop-up notification comes on every time you
receive a new text message.
OFF: The message you receive is stored in the system
without notification.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
3. Rotate
to select Message Notice, then
press
.
4. Rotate
to select a mode you want, then
press
.
296
uuBluetooth® HandsFreeLink®uHFL Menus
1To Create a Security PIN
To Create a Security PIN
■
In the phone is already security PIN protected, you
need to enter the current security PIN before clearing
the PIN or creating a new one.
You can protect each of the six cell phones with a security PIN.
1. Press the PHONE button or the
button.
to select Phone Setup, then
2. Rotate
press
.
u Repeat the procedure to select
Passcode.
3. Select a phone you want to add a security
PIN to.
u Rotate
to select a phone you want to
add a security PIN to, then press
.
4. A confirmation message appears on the
screen.
u Rotate
to select Yes, then press
.
5. Enter a new four-digit number.
u Rotate to select, then press . Press
to delete. Press to enter the
security PIN.
6. Re-enter the four-digit number.
u The screen returns to the screen in step
2.
Continued
297
uuBluetooth® HandsFreeLink®uHFL Menus
Automatic Transferring
■
If you get into the vehicle while you are on the phone, the call can be automatically
transferred to HFL.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
u Repeat the procedure to select Auto
Transfer.
3. Rotate
to select On, then press
.
4. A notification appears on the screen if the
change is successful.
1Caller’s ID Information
Caller’s ID Information
■
Name Priority mode: A caller’s name is displayed if it
is stored in the phonebook.
Number Priority mode: A caller’s phone number is
displayed.
You can select a caller’s information to be displayed when you have an incoming
call.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
u Repeat the procedure to select Caller ID
Info.
3. Rotate
press
to select a mode you want, then
.
4. A notification appears on the screen if the
change is successful.
298
uuBluetooth® HandsFreeLink®uHFL Menus
To Clear the System
■
Security codes, paired phones, all stored voice tags, all speed dial entries, and all
imported phonebook data are erased.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
u Repeat the procedure to select System
Clear.
3. Rotate
to select Yes, then press
.
4. A confirmation message appears on the
screen. Rotate
.
to select Yes, then press
5. A confirmation message appears on the
screen. Rotate to finish.
Continued
299
uuBluetooth® HandsFreeLink®uHFL Menus
1Automatic Import of Cellular Phonebook and Call History
Automatic Import of Cellular Phonebook and Call History
■
When you select a person from the list in the cellular
phonebook, you can see up to three category icons.
The icons indicate what types of numbers are stored
for that name.
When your phone is paired, the contents of its phonebook and call history are
automatically imported to HFL.
Pref
Fax
Home
Car
Message
Other
Voice
Mobile
Work
Pager
If a name has four or more numbers, ∙∙∙ appears
instead of category icons.
On some phones, it may not be possible to import the
category icons to HFL.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
300
uuBluetooth® HandsFreeLink®uHFL Menus
1Speed Dial
Speed Dial
■
You can use the audio preset buttons during a call to
store a speed dial number:
1. Press and hold the desired audio preset button
during a call.
2. The contact information for the active call will be
stored for the corresponding speed dial.
Up to 15 speed dial numbers can be stored per phone.
To store a speed dial number:
1. Press the PHONE button or the
button.
to select Phone Setup, then
2. Rotate
press
.
u Repeat the procedure to select Speed
Dial, then Add New.
When a voice tag is stored, you can press the
button and call the number using voice commands.
3. Rotate
number from, then press
By Phonebook:
to select a place to choose a
.
u Select a number from the linked cell
phone’s imported phonebook.
By Call History:
u Select a number from the call history.
By Phone Number:
u Input the number manually.
4. When the speed dial is successfully stored,
you are asked to create a voice tag for the
number. Rotate
to select Yes or No,
then press
.
5. Using the
button, follow the prompts to
say the name for the speed dial entry.
Continued
301
uuBluetooth® HandsFreeLink®uHFL Menus
■
To add a voice tag to a stored speed
dial number
1Speed Dial
Avoid using duplicate voice tags.
1. Press the PHONE button or the
button.
Avoid using “home” as a voice tag.
It is easier for HFL to recognize a longer name. For
example, use “John Smith” instead of “John.”
2. Rotate
press
to select Phone Setup, then
.
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
to select Store Voice Tag, then
press
.
5. Using the
button, follow the prompts to
complete the voice tag.
■
To delete a voice tag
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
.
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
then press
to select Delete Voice Tag,
.
u A confirmation message appears on the
screen. Rotate to select Yes, then
press
.
302
uuBluetooth® HandsFreeLink®uHFL Menus
■
To delete a speed dial number
1. Press the PHONE button or the
button.
to select Phone Setup, then
2. Rotate
press
.
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
then press
to select Delete Speed Dial,
.
u A confirmation message appears on the
screen. Rotate to select Yes, then
press
.
1Making a Call
Making a Call
■
Any voice-tagged speed dial entry can be dialed by
voice from any screen.
You can make calls by inputting any phone number, or by using the imported
phonebook, call history, speed dial entries, or redial.
Press the
button and follow the prompts.
The maximum range between your phone and
vehicles is 30 feet (10 meters).
Once a call is connected, you can hear the voice of
the person you are calling through the audio
speakers.
Continued
303
uuBluetooth® HandsFreeLink®uHFL Menus
■
To make a call using the imported
phonebook
This function is disabled while the vehicle is moving.
However, you can call a stored voice-tagged speed
dial number using voice commands.
2 Limitations for Manual Operation P. 285
2 Speed Dial P. 301
When your phone is paired, the contents of its
phonebook are automatically imported to
HFL.
1. Press the PHONE button or the
button.
2. Rotate
to select Phonebook, then press
.
3. The phonebook is stored alphabetically.
Rotate
to select the initial, then press
.
4. Rotate
5. Rotate
.
to select a name, then press
to select a number, then press
.
u Dialing starts automatically.
■
To make a call using a phone number
1. Press the PHONE button or the
button.
This function is disabled while the vehicle is moving.
However, you can call a stored voice-tagged speed
dial number using voice commands.
2 Limitations for Manual Operation P. 285
2 Speed Dial P. 301
2. Rotate
3. Rotate
.
to select Dial, then press .
to select a number, then press
4. Rotate
to select , then press
.
u Dialing starts automatically.
304
uuBluetooth® HandsFreeLink®uHFL Menus
■
To make a call using redial
1. Press the PHONE button or the
2. Rotate
u Dialing starts automatically.
button.
.
to select Redial, then press
1To make a call using the call history
■
To make a call using the call history
The call history appears only when a phone is
received, or missed calls.
Call history is stored by Dialed Calls,
Received Calls, and Missed Calls.
1. Press the PHONE button or the
button.
2. Rotate
.
to select Call History, then press
3. Rotate
Calls, or Missed Calls, then press
to select Dialed Calls, Received
1To make a call using a speed dial entry
.
On the Phone screen, the first six speed dials on the
list can be directly selected by pressing the
corresponding audio preset buttons (1-6).
4. Rotate
to select a number, then press
.
u Dialing starts automatically.
■
To make a call using a speed dial entry
phone’s speed dial list.
1. Press the PHONE button or the
button.
2. Rotate
to select Speed Dial, then press
When a voice tag is stored, press the
call the number using voice commands.
2 Speed Dial P. 301
button and
.
3. Rotate
to select a number, then press
.
u Dialing starts automatically.
Any voice-tagged speed dial entry can be dialed by
voice from any screen.
Press the
button and follow the prompts.
Continued
305
uuBluetooth® HandsFreeLink®uHFL Menus
1Receiving a Call
Call Waiting
Press the
Receiving a Call
■
When there is an incoming call, an audible
notification sounds (if activated) and the
Incoming Call screen appears.
HFL Mode
Caller Name
button to put the current call on hold to
answer the incoming call.
Press the
button again to return to the current
call.
Press the
Press the
button to answer the call.
button to decline or end the call.
Ignore the incoming call if you do not want to answer
it.
Press the
button if you want to hang up the
current call.
306
uuBluetooth® HandsFreeLink®uHFL Menus
1Options During a Call
Touch Tones: Available on some phones.
Options During a Call
■
The following options are available during a call.
Mute: Mute your voice.
Transfer Call: Transfer a call from HFL to your phone.
Touch Tones: Send numbers during a call. This is useful when you call a menu-
driven phone system.
1. To view the available options, press the
PHONE button.
2. Rotate
to select the option, then press
.
u The check box is checked when Mute is
selected. Select Mute again to turn it off.
Continued
307
uuBluetooth® HandsFreeLink®uHFL Menus
1Receiving a Text Message
Receiving a Text Message
■
The system does not display any received messages
while you are driving. You can only hear them read
aloud.
With some phones, you may be able to display up to
20 most recent text messages.
HFL can display newly received text messages as well as 20 of the most recently
received messages on a connected cell phone. Each received message can be read
aloud and replied to using a fixed common phrase.
1. A pop-up appears and notifies you of a new
text message.
Only the first three lines of the received message are
displayed with this option.
2 Displaying an entire message P. 312
2. Rotate
to select Yes to listen to the
message, then press
.
u The text message is displayed. The
system automatically starts reading out
the message.
3. To discontinue the message read-out, press
the
button.
308
uuBluetooth® HandsFreeLink®uHFL Menus
1Displaying Messages
The icon appears next to an unread message.
Displaying Messages
■
1. Press the PHONE button or the
button.
2. Rotate
press
to select Text Message, then
Only the first three lines of the received message are
displayed with this option.
.
2 Displaying an entire message P. 312
If you delete a message on the phone, the message
disappears from the system. If you send a message
from the system, the message goes to your phone.
3. Rotate
to select a message, then press
.
u The text message is displayed. The
system automatically starts reading the
message aloud.
Continued
309
uuBluetooth® HandsFreeLink®uHFL Menus
■
Using the stop reading or read option
button.
to select Text Message, then
1Using the stop reading or read option
1. Press the PHONE button or the
2. Rotate
press
3. Rotate
.
This option changes to:
•
Stop Reading while the text message is read out.
Select this option to discontinue the message read-
out.
.
to select a message, then press
•
Read when you go to the Text Message menu, or
after you selected Stop Reading. Select this option
to hear the system reading out the selected
message.
u The text message is displayed. The
system automatically starts reading the
message aloud.
4. Press
5. Rotate
then press
to enter Text Message Menu.
to select Stop Reading or Read,
.
310
uuBluetooth® HandsFreeLink®uHFL Menus
■
Reply to a message
1Reply to a message
The available fixed reply messages are as follows:
You can reply to a message using one of the
six common phrases available in the system.
1. Press the PHONE button or the
2. Rotate
press
3. Rotate
.
•
•
•
•
•
•
Talk to you later, I'm driving.
I am on my way.
I'm running late.
OK
Yes
No
button.
to select Text Message, then
.
to select a message, then press
u The text message is displayed. The
system automatically starts reading out
the message.
You cannot add, edit, or delete reply messages.
After you reply, the following is displayed:
4. Press
to enter the Text Message
Menu.
5. Rotate
6. Rotate
press
to select Reply, then press
to select the reply message, then
.
.
7. The reply message you selected is displayed.
Select Yes to send the message.
Continued
311
uuBluetooth® HandsFreeLink®uHFL Menus
■
Making a call to a sender
You can call the text message sender.
1. Press the PHONE button or the
button.
2. Rotate
press
to select to Text Message, then
.
3. Rotate
.
to select a message, then press
u The text message is displayed. The
system automatically starts reading out
the message.
4. Press
5. Rotate
to enter the Text Message Menu.
to select Call, then press
.
u HFL begins dialing.
■
Displaying an entire message
1. Press the PHONE button or the
button.
2. Rotate
press
to select to Text Message, then
.
3. Rotate
.
to select a message, then press
u The text message is displayed. The
system automatically starts reading out
the message.
4. Press
to enter the Text Message
Menu.
5. Rotate
to select Display Message,
then press
.
6. Rotate
to scroll down and display the
entire message.
312
uuBluetooth® HandsFreeLink®uUsing HFL
Models with two displays
Using HFL
1Using HFL
To use HFL, you need a Bluetooth-compatible cell
phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:
HFL Buttons
■
MENU Button
Volume down
Volume up
•
1-888-528 -7876.
(Home) Button
•
528-7876.
SOURCE Button
Buttons
/
To use HFL, the Bluetooth On/Off Status setting
must be in On.
2 Customized Features P. 271
Voice control tips
•
Press the
button when you want to call a
number using a stored voice tag, a phonebook,
name or a number. Speak clearly and naturally
after a beep.
(Talk) Button
(Hang-up/Back) Button
(Pick-up) Button
Microphones
•
•
If the microphone picks up voices other than yours,
the command may be misinterpreted.
To change the volume level, use the audio system's
VOL (Volume) or use the remote audio controls on
the steering wheel.
(Menu) Button
(Pick-up) button: Press to go directly to the Phone screen, or to answer an
incoming call.
(Hang-up/Back) button: Press to end a call, go back to the previous
command, or to cancel a command.
(Talk) button: Press to call a number with a stored voice tag, a phonebook,
name, or a number.
State or local laws may prohibit the operation of
vehicle.
MENU button: Press and hold to display Speed Dial, Call History, or Redial on
the Phone screen.
Up to six speed dial entries can be displayed among a
total of 20 that can be entered. If there is no entries
in the system, Speed Dial is disabled.
/
button: Press to select an item displayed on the Phone screen.
2 Speed Dial P. 301
SOURCE button: Press to call a number listed in the selected item on the Phone
screen.
Continued
313
uuBluetooth® HandsFreeLink®uUsing HFL
To go to the Phone menu screen:
1Using HFL
1. Press the
2. Select Phone to switch the display to the Phone screen.
3. Press the button.
button.
Bluetooth® Wireless Technology
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motor Co., Ltd., is under
license. Other trademarks and trade names are those
of their respective owners.
HFL Status Display
■
The audio/information screen notifies you when there is an incoming call.
HFL Limitations
An incoming call on HFL will interrupt the audio
system when it is playing. It will resume when the call
is ended.
Bluetooth Indicator
Comes on when your
phone is connected to HFL.
Battery Level Status
Signal Strength
1HFL Status Display
HFL Mode
The information that appears on the audio/
information screen varies between phone models.
Caller’s Name
Caller’s Number
You can change the system language to English,
French, or Spanish.
2 Customized Features P. 271
Limitations for Manual Operation
■
You cannot select a grayed-out option until the vehicle is stopped.
Only previously stored speed dial entries with voice tags, phone book names, or
numbers can be called using voice commands while the vehicle is in motion.
2 Speed Dial P. 301
314
Models with two displays
HFL Menus
The power mode must be in ACCESSORY or ON to use the system.
1HFL Menus
To use HFL, you must first pair your Bluetooth-
compatible mobile phone to the system while the
vehicle is parked.
■
Phone settings screen
1. Press the
button.
2. Select Settings.
3. Select Phone.
Some functions are limited while driving. A message
appears on the screen when the vehicle is moving
and the operation is canceled.
Phone
Connect Phone*1
Add Bluetooth Device
Pair a phone to the system.
(Existing entry list)
Connect a phone to the system.
Disconnect
Disconnect a paired phone from the system.
Edit a previously paired
phone name.
Bluetooth Device List
(Existing entry list)*1
Edit Device Name
Delete This Device
Delete a previously paired
phone.
Add Bluetooth Device
Pair a phone to the system.
*1:Appears only when a phone is connected to HFL.
Continued
315
uuBluetooth® HandsFreeLink®uHFL Menus
Edit Speed Dial*1
New Entry
Manual Input
Enter a phone number to
store as a speed dial number.
Import from Call History Select a phone number from
the call history to store as a
speed dial number.
Import from Phonebook Select a phone number from
the phonebook to store as a
speed dial number.
(Existing entry list)
Edit
Edit a previously stored speed
dial number.
●
Change a name.
Change a number.
●
●
Create or delete a voice tag.
Delete
Delete a previously stored
speed dial number.
Delete All
Delete all of the previously stored speed dial number.
Ring Tone
Select the ring tone.
Automatic Phone Sync*1 Set phonebook data to be automatically imported when a phone is paired to HFL.
HondaLink Assist*1
Turn HondaLink Assist on and off.
*1:Appears only when a phone is connected to HFL.
316
uuBluetooth® HandsFreeLink®uHFL Menus
Text/Email*1
Enable Text/Email
Select Account
Turn the text/e-mail message function on and off.
Select a mail or text message account.
New Message Notification Select whether a pop-up alert comes on the screen when HFL
receives a new text/e-mail message.
Default
Cancel/Reset all customized items in the Phone Settings group as default.
*1:Appears only when a phone is connected to HFL.
Continued
317
uuBluetooth® HandsFreeLink®uHFL Menus
■
Phone menu screen
1. Press the
2. Select Phone.
3. Press the
button.
button.
Speed Dial*1
New Entry
Manual Input
Enter a phone number to store as a speed dial
number.
Import from Call History Select a phone number from the call history to store
as a speed dial number.
Import from Phonebook Select a phone number from the phonebook to store
as a speed dial number.
(Existing entry list) Dial the selected number in the speed dial list.
Phonebook*1 Display the paired phone’s phonebook.
Redial*1
Dial*1
Redial the last number dialed in the phone’s history.
Enter a phone number to dial.
*1:Appears only when a phone is connected to HFL.
318
uuBluetooth® HandsFreeLink®uHFL Menus
Call History*1
All
Display the last 20 outgoing, incoming and missed calls.
Dialed
Received
Missed
Display the last 20 outgoing calls.
Display the last 20 incoming calls.
Display the last 20 missed calls.
Text/Email*1
Select Account*
Select a mail or text message account.
Select a message.
Message is read aloud.
Read/Stop
Previous
Next
System reads received message aloud, or stop
message from being read.
See the previous message.
See the next message.
Reply
Reply to a received message using one of six fixed
phrases.
Call
Make a call to the sender.
*1:Appears only when a phone is connected to HFL.
* Not available on all models
Continued
319
uuBluetooth® HandsFreeLink®uHFL Menus
1Phone Setup
Phone Setup
■
Your Bluetooth-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
■
To pair a mobile phone (when there is
no phone paired to the system)
1. Select Phone.
2. Select Yes.
3. Make sure your phone is in search or
discoverable mode, then select Continue.
u HFL automatically searches for a
Bluetooth device.
Phone Pairing Tips:
•
You cannot pair your phone while the vehicle is
moving.
•
•
Up to six phones can be paired.
Your phone’s battery may drain faster when it is
paired to HFL.
4. Select your phone when it appears on the
list.
•
If your phone is not ready for pairing or not found
by the system, the system will return to the
previous screen.
u If your phone does not appear, you can
select Refresh to search again.
u If your phone still does not appear, select
Phone not Found and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink.
5. The system gives you a pairing code on the
audio/information screen.
u Confirm if the pairing code on the screen
and your phone match. This may vary by
phone.
6. A notification appears on the screen if
pairing is successful.
320
uuBluetooth® HandsFreeLink®uHFL Menus
■
To pair a phone when a phone is
already paired
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Connect Phone.
3. Select a phone to connect.
u Pairing start.
4. A notification appears on the screen if
pairing is successful.
■
Changing the currently paired phone
1Changing the currently paired phone
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
If no other phones are found or paired when trying to
switch to another phone, HFL will inform you that the
original phone is connected again.
2. Select Connect Phone.
3. Select a phone to connect.
u HFL disconnects the current phone and
starts searching for another paired
phone.
To pair other phones, select Add Bluetooth Device
from the Connect Phone screen.
Continued
321
uuBluetooth® HandsFreeLink®uHFL Menus
■
To change the pairing code setting
button.
1To change the pairing code setting
1. Press the
2. Select Settings.
The default pairing code is 0000 until you change the
setting.
To create your own, select Fixed, and delete the
current code, then enter a new one.
3. Select Bluetooth.
4. Select Bluetooth tab.
5. Select Edit Pairing Code.
6. Select Fixed or Random.
For a randomly generated pairing code each time you
pair a phone, select Random.
322
uuBluetooth® HandsFreeLink®uHFL Menus
■
To edit an already-paired phone name
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab.
3. Select Bluetooth Device List.
4. Select a paired phone you want to edit.
5. Select Edit Device Name.
6. Edit the name and select OK.
7. A notification appears if the change is
successful.
Continued
323
uuBluetooth® HandsFreeLink®uHFL Menus
■
To delete a paired phone
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab.
3. Select Bluetooth Device List.
4. Select a phone you want to delete.
5. Select Delete This Device.
6. You will receive a confirmation message on
the screen. Select Yes.
7. A notification appears if the deletion is
successful.
324
uuBluetooth® HandsFreeLink®uHFL Menus
To Set Up a Text/E-mail Message Options
■
■
To turn on or off the text/e-mail
message function
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Text/Email tab, then Enable Text/
Email.
u A pop-up menu appears on the screen.
3. Select On or Off.
■
To turn on or off the text/e-mail
message notice
1To turn on or off the text/e-mail message notice
On: A pop-up notification comes on every time you
receive a new message.
Off: The message you receive is stored in the system
without notification.
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Text/Email tab, then New
Message Notification.
u A pop-up menu appears on the screen.
3. Select On or Off.
Continued
325
uuBluetooth® HandsFreeLink®uHFL Menus
1Ring Tone
Ring Tone
■
Fixed: The fixed ring tone sounds from the speaker.
Mobile Phone: The ring tone stored in the
connected cell phone is heard through the vehicle
speakers.
You can change the ring tone setting.
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab, then Ring Tone.
3. Select Fixed or Mobile Phone.
326
uuBluetooth® HandsFreeLink®uHFL Menus
1Automatic Import of Cellular Phonebook and Call History
Automatic Import of Cellular Phonebook and Call History
■
When you select a person from the list in the cellular
phonebook, you can see up to three category icons.
The icons indicate what types of numbers are stored
for that name.
■
When Automatic Phone Sync is set to
On:
When your phone is paired, the contents of its
phonebook and call history are automatically
imported to the system.
Pref
Fax
Home
Mobile
Work
Pager
Car
Other
Voice
■
Changing the Automatic Phone Sync
setting
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab, then Automatic Phone
Sync.
On some phones, it may not be possible to import the
category icons to the system.
3. Select On or Off.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Continued
327
uuBluetooth® HandsFreeLink®uHFL Menus
1Speed Dial
Speed Dial
■
When a voice tag is stored, press the
call the number using the voice tag. Say “Call” and
the voice tag name.
button to
Up to 20 speed dial numbers can be stored per phone.
To store a speed dial number:
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
2. Select Speed Dial.
u Repeat the procedure to select New
Entry.
3. Select a place to choose a number.
From Import from Call History:
u Select a number from the call history.
From Manual Input:
u Input the number manually.
From Import from Phonebook:
u Select a number from the linked cell
phone’s imported phonebook.
4. When the speed dial is successfully stored
from Import from Call History or Import
from Phonebook, you are asked to create
a voice tag for the number. Select Yes or
No.
5. Select Record to store a voice tag for the
speed dial entry.
u Using the
button, follow the prompts
to store a voice tag for the speed dial
entry.
328
uuBluetooth® HandsFreeLink®uHFL Menus
■
To add a voice tag to a stored speed
dial number
1Speed Dial
Avoid using duplicate voice tags.
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
Avoid using “home” as a voice tag.
It is easier for the system to recognize a longer name.
For example, use “John Smith” instead of “John.”
2. Select Phone tab, then Edit Speed Dial.
3. Select an existing speed dial entry.
u From the pop-up menu, select Edit.
4. Select Voice Tag.
u From the pop-up menu, select Record.
5. Select Record to store the voice tag.
6. Using the
button, follow the prompts to
complete the voice tag.
■
To delete a voice tag
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab, then Edit Speed Dial.
3. Select an existing speed dial entry.
u From the pop-up menu, select Edit.
4. Select Voice Tag.
u From the pop-up menu, select Clear.
5. A confirmation message appears on the
screen. Select Yes.
Continued
329
uuBluetooth® HandsFreeLink®uHFL Menus
■
To delete a speed dial
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Phone tab, then Edit Speed Dial.
3. Select an existing speed dial entry.
u From the pop-up menu, select Delete.
4. A confirmation message appears on the
screen. Select Yes.
1Making a Call
Making a Call
■
Any voice-tagged speed dial entry, phonebook name,
or number can be dialed by voice from most screens.
You can make calls by inputting any phone
number, or by using the imported
phonebook, call history, speed dial entries, or
redial.
Press the
button and say “Call” and the stored
voice tag name.
The maximum range between your phone and
vehicles is 30 feet (10 meters).
Once a call is connected, you can hear the voice of
the person you are calling through the audio
speakers.
330
uuBluetooth® HandsFreeLink®uHFL Menus
■
To make a call using the imported
phonebook
This function is disabled while the vehicle is moving.
However, you can call a stored voice-tagged speed
dial number using voice commands.
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
2 Limitations for Manual Operation P. 314
2 Speed Dial P. 328
2. Select Phonebook.
3. Select a name.
u You can also search by letter. Select
Search.
u Use the keyboard on the touch screen for
entering letters.
4. Select a number.
u Dialing starts automatically.
■
To make a call using a phone number
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
This function is disabled while the vehicle is moving.
However, you can call a stored voice-tagged speed
dial number using voice commands.
2 Limitations for Manual Operation P. 314
2 Speed Dial P. 328
2. Select Dial.
3. Select a number.
u Use the keyboard on the touch screen for
entering numbers.
4. Select
.
u Dialing starts automatically.
Continued
331
uuBluetooth® HandsFreeLink®uHFL Menus
■
To make a call using redial
1To make a call using redial
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
Press and hold the
number dialed in your phone’s history.
button to redial the last
2. Select Redial.
u Dialing starts automatically.
■
To make a call using the call history
1To make a call using the call history
Call history is stored by All, Dialed,
Received, and Missed.
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
2. Select Call History.
The call history displays the last 20 dialed, received, or
missed calls.
(Appears only when a phone is connected to the
system.)
3. Select All, Dialed, Received, or Missed.
4. Select a number.
u Dialing starts automatically.
■
To make a call using a speed dial entry
1To make a call using a speed dial entry
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
When a voice tag is stored, press the
call the number using the voice tag.
2 Speed Dial P. 328
button to
2. Select Speed Dial.
3. Select a number.
u Dialing starts automatically.
Any voice-tagged speed dial entry can be dialed by
voice from any screen.
Press the
button and follow the prompts.
332
uuBluetooth® HandsFreeLink®uHFL Menus
1Receiving a Call
Receiving a Call
■
Call Waiting
Press the
to answer the incoming call.
When there is an incoming call, an audible
notification sounds and the Incoming call
screen appears.
button to put the current call on hold
Press the
button again to return to the current
call.
Select Ignore to ignore the incoming call if you do
not want to answer it.
Press the
Press the
button to answer the call.
button to decline or end the call.
Press the
button if you want to hang up the
current call.
You can select the icons on the touch screen instead
of the and buttons.
1Options During a Call
Options During a Call
■
Touch Tones: Available on some phones.
The available options appear on the screen during a call.
Mute: Mute your voice.
You can select the icons on the touch screen.
u The mute icon appears when Mute is
selected. Select Mute again to turn it off.
Transfer: Transfer a call from the system to
your phone.
ᵁᵁᵁᵁᵁᵁᵁᵁ
Touch Tones: Send numbers during a call.
This is useful when you call a menu-driven
phone system.
Mute Icon
Continued
333
uuBluetooth® HandsFreeLink®uHFL Menus
1Receiving a Text/E-mail Message
Receiving a Text/E-mail Message
■
The system does not display any received messages
while you are driving. You can only hear them read
aloud.
HFL can display newly received text or e-mail messages as well as 20 of the most
recently received messages on a linked cell phone. Each received message can be
read aloud and replied to using a fixed common phrase.
With some phones, you may be able to display up to
20 most recent text and e-mail messages.
1. A pop-up appears and notifies you of a new
text or e-mail message.
2. Select Read to listen to the message.
u The text or e-mail message is displayed.
The system automatically starts reading
out the message.
State or local laws may limit your use of the HFL text/
e-mail message feature. Only use the text/e-mail
message feature when conditions allow you to do so
safely.
first time since the phone is paired to HFL, you are
asked to turn the New Message Notification
setting to On.
3. To discontinue the message read-out, select
Stop.
2 To turn on or off the text/e-mail message
notice P. 325
334
uuBluetooth® HandsFreeLink®uHFL Menus
1Selecting a E-mail Message Account
Selecting a E-mail Message Account
■
You can also select a mail account from the folder list
screen or the message list screen.
If a paired phone has text or e-mail message accounts, you can select one of them
to be active and receive notifications.
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
2. Select Text/Email tab, then Select
Account.
u A pop-up menu appears on the screen.
3. Select Text Message or an e-mail message
account you want.
Select
Account
You can only receive notifications from one text
message or mail account at a time.
Continued
335
uuBluetooth® HandsFreeLink®uHFL Menus
1Displaying Messages
Displaying Messages
■
The
icon appears next to an unread message.
■
Displaying text messages
Message List
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
If you delete a message on the phone, the message is
also deleted in the system. If you send a message
from the system, the message goes to your phone’s
outbox.
2. Select Text/Email.
u Select account if necessary.
3. Select a message.
u The text message is displayed. The
system automatically starts reading the
message aloud.
To see the previous or next message, select Previous
or Next on the message screen.
Text Message
336
uuBluetooth® HandsFreeLink®uHFL Menus
■
Displaying e-mail messages
Folder List
1. Go to the Phone menu screen.
2 Phone menu screen P. 318
2. Select Text/Email.
u Select Select Account if necessary.
3. Select a folder.
4. Select a message.
u The e-mail message is displayed. The
system automatically starts reading the
message aloud.
Message List
E-mail Message
Continued
337
uuBluetooth® HandsFreeLink®uHFL Menus
■
Read or Stop reading a message
1. Go to the text or e-mail message screen.
u The system automatically starts reading
the message aloud.
2 Displaying Messages P. 336
2. Select Stop to stop reading.
Select Read again to start reading the
message from the beginning.
■
Reply to a message
1Reply to a message
1. Go to the text or e-mail message screen.
u The system automatically starts reading
the message aloud.
The available fixed reply messages are as follows:
•
•
•
•
•
•
Talk to you later, I’m driving.
I’m on my way.
I’m running late.
OK
Yes
No
2 Displaying Messages P. 336
2. Select Reply.
3. Select the reply message.
u The pop-up menu appears on the screen.
4. Select Send to send the message.
u Complete appears on the screen when
the reply message was successfully sent.
You cannot add, edit, or delete reply messages.
338
uuBluetooth® HandsFreeLink®uHFL Menus
■
Making a call to a sender
1. Go to the text message screen.
2. Select Dial.
Continued
339
uuBluetooth® HandsFreeLink®uHFL Menus
1In Case of Emergency
In Case of Emergency
■
Your vehicle may not be able to connect to the
operator if the battery level is low, the line is
disconnected, or you do not have adequate cellular
coverage.
■
Automatic collision notification
If your vehicle’s airbags deploy or if the unit
detects that the vehicle is severely impacted,
your vehicle automatically will attempt to
connect to the HondaLink operator. If
connected, information about your vehicle, its
location, and its condition will be sent to the
operator; you also can speak to the operator
when connected.
You cannot use this emergency services when:
•
You travel outside the HondaLink service coverage
areas.
•
There is a problem with the connecting devices,
such as the microphones, speakers, or the unit
itself.
IMPORTANT: For vehicles equipped with HondaLink Assist, owner activation
constitutes authorization for Honda to collect information from your vehicle needed
to provide the service, and agreement to the Terms of Use at www.hondalink.com/
TermsAndConditions. In a crash, HondaLink Assist will attempt to notify emergency
services but NEITHER HONDA NOR ITS SERVICE PROVIDERS GUARANTEE THAT
SUCH NOTIFICATION WILL OCCUR.
using the screen while talking to the operator.
Select Hang Up to terminate the connection to your
vehicle.
1Automatic collision notification
If the unit fails to connect to the operator, it
repeatedly tries until it succeeds.
Honda reserves the right to terminate HondaLink Assist services at any time or for
any reason, and in the future may not be able to provide services due to changes in,
or obsolescence of, technology integral to the service or changes in governmental
regulation.
340
uuBluetooth® HandsFreeLink®uHFL Menus
■
To enable notification
1To enable notification
Setting options:
1. Go to the Phone settings screen.
2 Phone settings screen P. 315
•
•
On: Notification is available.
Off: Disable the feature.
2. Select Phone tab, then HondaLink Assist.
u A pop-up menu appears on the screen.
3. Select On or Off.
341
