Deutsch
EnglishMOBILITY -> Maintenance for your BMW X5 2018-2025
Maintenance
MOBILITY
Maintenance
General
Vehicle equipment
Information on service requirements can be
shown on the control display.
This chapter describes equipment, systems
and functions which are offered or may be of-
fered in future on a model-specific basis, even
if they are not included in the vehicle in ques-
tion.
For further information:
Service requirements, see page 176.
Service data in the vehicle key
For further information:
Information on maintenance requirement is
continuously stored in the vehicle key. The
Service Partner can read out this data and
suggest a programme of maintenance for your
vehicle.
Vehicle equipment, see page 8.
BMW Maintenance System
Give the service advisor the vehicle key that
was last used to drive the vehicle.
Principle
The maintenance system indicates what main-
tenance measures are required and thereby
assists in maintaining the road safety and op-
erational safety of the vehicle.
Stationary periods
Stationary periods when the vehicle is out of
use with its vehicle battery disconnected are
not taken into account.
General
Have any time-dependent maintenance proce-
dures, for example, those concerning the brake
fluid, engine oil and the microfilter/activated
carbon filter, updated by an authorised Service
Partner or another qualified Service Partner or
a specialist workshop.
The exact work required and the maintenance
intervals may vary depending on the national-
market version. Labour, spare parts, operating
materials and wear materials are charged sep-
arately. Additional information is available from
an authorised Service Partner or another quali-
fied Service Partner or a specialist workshop.
Service history
Condition Based Service
Maintenance and repairs
Have maintenance and repairs carried out by
an authorised Service Partner or another quali-
fied Service Partner or a specialist workshop.
Principle
Condition Based Service determines the main-
tenance requirement using sensors and spe-
cial algorithms which monitor the conditions in
which the vehicle is used.
Entries
The maintenance work carried out is entered
in the maintenance records and the vehicle
data. As with a Service Booklet, the entries
serve as proof of regular maintenance.
The maintenance requirement is determined,
taking into account the individual usage profile
of the vehicle.
404
Online Edition for Part no. 01405A7D5D0 - II/23
Maintenance
MOBILITY
When data is entered into the vehicle's elec-
tronic service history, any service-relevant data
is saved both in the vehicle and in the central
IT systems of BMW AG, Munich.
Socket for on-board
diagnosis
After a change of registered keeper, the new
owner will be able to view the data entered
in the electronic service history. Similarly, an
authorised Service Partner or another qualified
Service Partner or a specialist workshop can
also view the data entered in the electronic
service history.
General
Devices connected to the on-board diagnostic
socket trigger the alarm system after locking
the vehicle.
Remove devices connected to the on-board di-
agnostic socket before locking the vehicle.
Safety information
Objection
The registered keeper is entitled to contact an
authorised Service Partner or another qualified
Service Partner or a specialist workshop and
request that no entries are made in the elec-
tronic service history and that no data relat-
ing to his/her time as owner is subsequently
stored in the vehicle or transferred to the ve-
hicle manufacturer. In such cases, no entries
will be made in the vehicle's electronic service
history.
NOTICE
Incorrect use of the on-board diagnostic
socket can cause malfunctions in the vehi-
cle. There is a risk of material damage. Serv-
ice and maintenance work involving the on-
board diagnostic socket must be carried out
by an authorised Service Partner, or another
qualified Service Partner, or a specialist work-
shop, or other authorised persons. Only con-
nect devices that have been tested and found
to be safe for use with the socket for on-
board diagnosis.
Displays
Service work which has been logged can be
displayed on the control display.
For further information:
Position
Service requirements, see page 176.
For Australia: maintenance
No maintenance work other than normal main-
tenance is required to keep the emission levels
of your vehicle within the design limits.
There is an on-board diagnostic socket on the
driver’s side for reading out vehicle data.
405
Online Edition for Part no. 01405A7D5D0 - II/23
Maintenance
MOBILITY
Engine warning light
▷
When the warning light flashes:
There is an engine fault which could
damage the catalytic converter.
Have the vehicle checked immedi-
ately.
▷
When warning light illuminates:
Emission levels have deteriorated. Have
the vehicle checked as soon as possible.
Recycling vehicle
The manufacturer of the vehicle recommends
returning the vehicle to a collection point nom-
inated by the manufacturer at the end of its
life cycle. The relevant national legal provisions
apply to returns and recycling in general. Infor-
mation on recycling and sustainability can be
found on the manufacturer’s country-specific
websites. Further information is available from
an authorised Service Partner or another quali-
fied Service Partner or a specialist workshop.
406
Online Edition for Part no. 01405A7D5D0 - II/23
