Deutsch
EnglishControls and features -> Digital clock in MID for your BMW X5 2000-2006
Digital clock in MID
85n
To avoid endangering yourself
or other road users, only make
entries when the vehicle is stationary.<
Changing time
Changing date
Press the left side of the button.
Press the left side of the button.
Calling up time or date
Press the left side of the button.
Display shows:
Press the right side of the button:
The dots flash in the display.
Press.
To change the setting:
Press the right side of the button:
The dots and the DATE display flash.
You can have the time displayed in
12 or 24 hours.
Press on the left/right, or hold the but-
ton down.
To change the setting:
To change the display:
To store the entry:
Press on the left/right, or hold the but-
ton down.
Press the left side of the button.
Press the right side of the button.
If the 12-hour time display is in use,
AM or PM appears after the time.
To store the entry:
Press the right side of the button.
The clock takes leap years into account
and therefore does not have to be reset
manually.
86nDigital clock in MID
To start the stopwatch function:
Reminder signal
Stopwatch
You can program a reminder signal –
memo – to be heard every hour, so that
you are sure not to miss a news broad-
cast.
Press the left side of the button.
Press the right side of the button.
To take an intermediate time reading:
Press the left side of the button.
Press.
Display shows:
Press.
Press:
MEMO OFF appears in the display for
entry and call-up buttons, and the tone
symbol will appear in the upper right of
the display.
Press:
The stopwatch display can be seen
counting up; the stopwatch continues
to run.
A signal is then heard 15 seconds
before each hour.
To halt the stopwatch:
Press the right side of the button.
The stopwatch is halted when the
ignition key is turned back to 0,
but starts to run again when the ignition
key is turned to 1.<
Digital clock in MID
87n
To enter the time:
Entering switch-on times for
independent ventilation
Directly switching independent
ventilation on and off
You can enter two different switch-on
times.
The ventilation will switch off automati-
cally after 30 minutes.
The independent ventilation func-
tion can only be called up in igni-
tion key position 1.<
Press on the left/right, or hold the but-
ton down.
To confirm the entry:
Please follow the instructions for
operating the independent ventila-
tion that start on page 116.<
Press the left side of the button.
Press the right side of the button.
The activated time is marked with an
asterisk.
Press.
Press the left side of the button.
The switch-on times remain stored until
new entries are made.
Press on the left/right.
Display shows:
You can change switch-on times that
have already been stored by making a
new time entry as described above.
When the switch-on time is active, the
LED comes on in the MID. During actual
operation of the ventilation, the LED
flashes. The LED goes out when the
system is switched off.
Press the right side of the button:
Display flashes, e.g. TIMER 1.
To activate/deactivate the time:
Press twice.
