Controls and features -> Cruise control for your BMW X5 2000-2006

74nCruise control*  
You can automatically maintain and  
store any desired vehicle speed above  
approx. 20 mph/30 km/h.  
Activating system  
Maintaining and storing speed  
or accelerating  
As of ignition key position 2:  
You can use cruise control whenever  
the system is active while the engine is  
running.  
Press button; the indicator lamp in the  
instrument cluster comes on, refer to  
page 22. You are able to use the cruise current vehicle speed. Every time you  
Briefly press button +:  
The system maintains and stores the  
On the sports steering wheel*, there  
are +/– buttons on the right side of the  
steering wheel for the cruise control.  
control.  
briefly press the button, the speed  
increases by approx. 0.6 mph/1 km/h.  
Deactivating system  
Press and hold button +:  
The vehicle accelerates without pres-  
sure on the accelerator pedal. When  
you release the button, the system  
maintains and stores the current speed.  
Do not use the cruise control  
when unfavorable conditions do  
not permit driving at constant speed.  
Otherwise you could loose control of  
the vehicle and cause an accident.  
These unfavorable conditions include  
winding roads, heavy traffic or poor  
road conditions, e.g. snow, rain, ice or  
a loose road surface.<  
Press the button repeatedly until the  
indicator lamp in the instrument cluster  
goes out.  
If, on a downhill grade, the engine's  
braking effect is not sufficient, the con-  
trolled speed can be exceeded. Speed  
can drop on uphill grades if the engine  
output is insufficient.  
The cruise control is also deactivated  
when the ignition key is turned into  
position 0.  
The speed stored in the memory is  
deleted.  
Cruise control*  
75n  
Deceleration  
Interrupting cruise control  
Recalling stored setting  
Briefly press button –:  
When the system is activated, press  
button 1. The indicator lamp stays on.  
You can use the cruise control again  
whenever required by calling up the  
speed that was stored last.  
Press button:  
The vehicle accelerates to and main-  
tains the last speed stored.  
When cruise control is active, every  
brief touch of the button reduces the  
speed by approx. 0.6 mph/1 km/h.  
Press and hold button –:  
With the cruise control active, the sys-  
tem automatically reduces the throttle  
opening to slow the vehicle. When you  
release the button, the system main-  
tains and stores the current speed.  
In addition, cruise control is interrupted  
automatically:  
> When you apply pressure to the  
brake pedal  
> When you apply pressure to the  
clutch pedal or when you move the  
automatic transmission selector lever  
from Drive to Neutral  
> If you exceed or fall below the con-  
trolled speed for an extended period,  
by depressing the accelerator, for  
example  
> When DSC Dynamic Stability Control  
is set.