Deutsch
EnglishQUICK REFERENCE -> Set-up and use for your BMW X2 2017-2022
Set-up and use
QUICK REFERENCE
Set-up and use
Adjusting the exterior mirrors
Seats, mirrors, and steering
wheel
Electrically adjustable seats
1
2
3
Adjusting
Selecting a mirror, Automatic Curb Monitor
Folding in and out
1
2
3
4
5
Memory function
Backrest width
Adjusting the steering wheel
Manual steering wheel adjustment
Lumbar support
Backrest tilt
Forward/back, height, tilt
Adjusting the head restraint
Height
1. Fold the lever down.
2. Move the steering wheel to the preferred
height and angle to suit your seating position.
3. Fold the lever back up.
Memory function
Concept
▷ To raise: push the head restraint up.
▷ To lower: press button, arrow 1, and push
head restraint down.
The following settings can be stored and, if nec‐
essary, retrieved using the memory function:
For equipment specification with M sport seat:
The height of the head restraints cannot be set.
▷ Seat position.
▷ Exterior mirror position.
18
Set-up and use
QUICK REFERENCE
▷ Height of the Head-up Display.
6
7
Changing the station/track
Programmable memory buttons
Storing
1. Switch on the ignition.
Navigation destination input
2. Set the desired position.
Entering a destination via address
Via iDrive:
3.
Press the button. The LED in the
button lights up.
4. Press the desired button 1 or 2 while the
LED is lit. The LED goes out.
State/province
1. "Navigation"
Calling up settings
2.
"Enter address"
Press the desired button 1 or 2.
3. "State/Province?"
The stored position is called up automatically.
4. Select the country from the list.
The procedure stops when a seat adjustment
switch or one of the memory buttons is pressed.
Entering the address
The address can be entered in any order.
Example: entering the address via the town/city
Once underway, adjustment of the seat position
on the driver's side is disabled after a short while.
1. "City/Postal code?"
2. Enter the town/city.
Infotainment
The list is narrowed down further with each
entry.
Radio
3.
Select the symbol.
Control elements
4. Select a town/city from the list.
5. If necessary, enter the street.
6. Select the street as you would the town/city.
7. If necessary, enter a house number.
8.
Select the symbol.
9. Select a house number or range of house
numbers from the list.
Starting destination guidance
1
2
3
4
Waveband/satellite radio
"Start guidance"
Changing the entertainment source
Sound output on/off, volume
If only the town/city was entered: destination
guidance is started to the town/city center.
Depending on the vehicle equipment: eject‐
ing a CD/DVD
Connecting a mobile phone
After the mobile phone is connected once to the
vehicle, the mobile phone can be operated using
5
Depending on the vehicle equipment:
CD/DVD drive
19
Set-up and use
QUICK REFERENCE
iDrive, the steering wheel buttons and spoken in‐
structions.
Dialing a number
1. "Communication"
2. "Dial number"
1. "My Vehicle"
2. "iDrive settings"
3. "Mobile devices"
4. "Connect new device"
3. Enter the numbers.
4.
Select the symbol. The connection is es‐
tablished via the mobile phone to which this
function has been assigned.
5. Select the functions for which the mobile
phone is to be used.
Establish the connection via the additional
phone:
The vehicle's Bluetooth name is displayed on
the Control Display.
1.
Press the button.
6. To perform additional steps on the mobile
phone, refer to the mobile phone owner's
manual: e.g., search for or connect the Blue‐
tooth device or a new device.
2. "Call via"
Apple CarPlay preparation
Concept
CarPlay allows certain functions of a compatible
Apple iPhone to be used via Siri voice operation
and iDrive.
The Bluetooth name of the vehicle appears
on the mobile phone display. Select the Blue‐
tooth name of the vehicle.
7. Depending on the mobile device, a control
number is displayed or the control number
must be entered.
Functional requirements
▷ Compatible iPhone.
▷ Compare the control number displayed
on the Control Display with the control
number on the display of the device.
iPhone 5 or later with iOS 7.1 or later.
▷ Corresponding mobile contract.
Confirm the control number on the device
and on the Control Display.
▷ Bluetooth, WLAN, and Siri voice operation
are activated on the iPhone.
▷ Enter and confirm the same control num‐
ber on the device and via iDrive.
The device is connected and displayed in the
device list.
Switching on Bluetooth and CarPlay
Via iDrive:
1. "My Vehicle"
Using the phone
Accepting a call
Incoming calls can be accepted via iDrive or the
button on the steering wheel.
2. "iDrive settings"
3. "Mobile devices"
4. "Settings"
5. Select the following settings:
▷ "Bluetooth®"
Via iDrive
▷ "Apple CarPlay"
"Accept"
Pairing the iPhone with CarPlay
Via the button on the steering wheel
Pair iPhone via Bluetooth with the vehicle.
Press the button.
20
Set-up and use
QUICK REFERENCE
Select CarPlay as the function:
"Apple CarPlay"
The iPhone is connected to the vehicle and dis‐
played in the device list.
21
