CONTROLS -> Driving comfort for your BMW iX 2021-2025

Driving comfort  
CONTROLS  
Driving comfort  
Overview  
Vehicle features and options  
Button in vehicle  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Additional information:  
Vehicle equipment, refer to page 8.  
Two-axle ride level control  
Self-leveling suspension  
Principle  
The two-axle self-leveling suspension uses air  
springs to ensure the best possible driving  
comfort. Regardless of the load, the vehicle will  
be maintained at the configured vehicle level.  
Functional requirement  
All doors are closed.  
Opening a door while raising or lowering the  
vehicle interrupts the process. The process  
continues after closing the door.  
General information  
The shock absorbers can be set from comfort-  
able to sporty via the My Modes drive modes.  
Depending on the driving situation, the vehicle  
level can be set to different levels:  
Activating/deactivating self-leveling  
suspension  
The system can be deactivated, e.g., to  
change a wheel or for towing.  
Normal level: for normal road condition.  
Elevated level: in poor road conditions or  
for light terrain.  
Deactivate system:  
Press and hold the button for approx.  
7 seconds, until the LED flashes rap-  
idly.  
Safety information  
Warning  
To activate system:  
Adjusting the vehicle height may result in  
trapped body parts or damaged vehicle parts.  
There is a risk of injury or risk of damage to  
property. When adjusting the vehicle height,  
make sure that the areas of movement  
around the vehicle and at the wheel housing  
are free.  
Press the button and hold for approx.  
7 seconds, then release.  
The self-leveling suspension is automatically  
activated after driving off at speeds above ap-  
prox. 6 mph/10 km/h.  
267  
Online Edition for Part no. 01405B39992 - II/24  
Driving comfort  
CONTROLS  
If the vehicle battery charge is too low, the  
vehicle level cannot be changed.  
Setting the vehicle level manually  
Press the button.  
If the vehicle level is frequently changed in  
quick succession, the system switches off  
to prevent overheating and will be tempo-  
rarily unavailable or operate at a delay. Let  
the system cool down, if needed.  
Depending on vehicle speed, using this button  
lifts the vehicle to the raised level.  
If the payload is increased, the highest driv-  
ing level may be disabled or automatically  
exited in order to protect the system.  
LED display  
LED off: Normal vehicle level.  
LED flashes: Vehicle level is being ad-  
justed.  
Malfunction  
A Check Control message is displayed.  
LED illuminates: Raised vehicle level.  
LED flashes rapidly: Vehicle level cannot be  
adjusted.  
In case of a malfunction, the vehicle will have  
changed handling characteristics or a noticea-  
bly reduced driving comfort.  
Setting the vehicle level  
automatically  
The vehicle will lower automatically in the fol-  
lowing situations:  
Have the vehicle checked by an authorized  
service center or another qualified service cen-  
ter or repair shop.  
My Modes: "SPORT".  
At higher speeds.  
BMW IconicSounds  
When a set vehicle level is exited due to the  
speed, the vehicle level will be adjusted ac-  
cording to the selected driving mode.  
Depending on vehicle equipment and national-  
market version, the vehicle drive sound can be  
adjusted using BMW IconicSounds.  
1.  
Apps menu  
Long stationary periods  
During long stationary periods, the vehicle may  
lower itself. This is not a malfunction.  
2. "Vehicle"  
3. "Driving settings"  
4. "Drivetrain and chassis"  
5. "IconicSounds"  
When the drive-ready state is switched on with  
the doors closed, the vehicle is raised to the  
normal level automatically.  
6. Select the desired setting.  
Depending on the condition of the vehicle, rais-  
ing to normal level may take several minutes.  
System limits  
It may not possible to change the vehicle  
level during sporty driving.  
It may not be possible to change the vehicle  
level with articulated axles.  
It may only be possible to raise the vehicle  
level in the drive-ready state.  
268  
Online Edition for Part no. 01405B39992 - II/24