Seats, mirrors and steering wheel -> Seat belts for your BMW i5 2023-2025

Seats, mirrors and steering wheel  
CONTROLS  
Safety information  
Activating/deactivating the setting  
1.  
Apps menu  
Warning  
2. "Vehicle"  
There is a danger of jamming when moving  
the seats. There is a risk of injury or risk  
of damage to property. Make sure that the  
travel path of the seat is clear prior to any  
adjustment.  
3. "Seat comfort"  
4. "Comfort exit"  
5. Select the desired setting.  
Seat belts  
Calibrating the front seat  
1. Press the longitudinal direction switch for-  
ward for approx. 2 seconds until the seat  
stops.  
General information  
The vehicle is fitted with five seat belts to en-  
sure occupant safety. However, they can only  
offer protection when adjusted correctly.  
2. Repeat step 1 until the seat stops then  
moves slightly forward.  
Always make sure that seat belts are being  
worn by the occupants before driving off. The  
airbags supplement the seat belts as an ad-  
ditional safety device. The airbags do not re-  
place seat belts.  
3. Press the switch forward for approx. 2 sec-  
onds again until the seat stops.  
4. Repeat step 3 until the seat stops then  
moves slightly backward.  
All seat belt anchorage points are designed to  
achieve the best possible protective effect for  
the seat belts when used properly and with the  
correct seat settings.  
As soon as the message on the control dis-  
play disappears, the calibration is complete.  
If the message remains active, repeat the cali-  
bration.  
The two outer seat belt buckles of the rear  
seats are intended for the persons sitting on  
the left and right.  
If the message is still shown after repeated  
calibration, have the vehicle checked by an  
authorized service center or another qualified  
service center or repair shop.  
The center seat belt buckle of the rear seats is  
intended for the person sitting in the middle.  
Additional information:  
Comfort exit  
Notes on sitting safely, refer to page 108.  
Principle  
Safety information  
The seat position can be adjusted automati-  
cally to make it easier to get in and out of the  
vehicle.  
Warning  
Use of a seat belt to buckle more than one  
person will potentially defeat the ability of  
the seat belt to serve its protective function.  
There is a risk of injury or danger to life.  
Do not strap in more than one person per  
single seat belt. Infants and children are not  
allowed on an occupant's lap, and must be  
General information  
The backrest width completely opens tem-  
porarily.  
The seat moves back.  
112  
Online Edition for Part no. 01405B37D97 - II/24  
Seats, mirrors and steering wheel  
CONTROLS  
transported and secured in designated child  
restraint systems.  
Correct use of seat belts  
Wear the seat belt tight to your body over  
your lap and shoulders, without twisting it.  
Wear the seat belt deep on your hips over  
your lap. The seat belt must not press on  
your stomach.  
Warning  
The protective effect of safety gear, including  
seat belts, can be limited or lost when seat  
belts are fastened incorrectly. An incorrectly  
fastened seat belt can cause additional inju-  
ries, for instance in the event of an accident,  
braking or evasive maneuvers. There is a risk  
of injury or danger to life. Make sure that all  
occupants are wearing seat belts correctly.  
Do not rub the seat belt against sharp  
edges, or guide it or jam it in across hard  
or fragile objects.  
Avoid thick clothing.  
Re-tighten the seat belt frequently upward  
around your upper body area.  
Buckling the seat belt  
1. Guide the seat belt slowly over shoulder  
and hip to put it on.  
Warning  
With a rear seat backrest that is not locked,  
the protective effect of the middle seat belt  
is not guaranteed. There is a risk of injury or  
danger to life. If you are using the middle seat  
belt, lock the wider rear seat backrest.  
2. Insert the buckle tongue into the seat belt  
buckle. The seat belt buckle must engage  
audibly.  
Warning  
The protective effect of safety gear, including  
seat belts, may not be fully operational or fail  
in the following situations:  
The seat belts or seat belt buckles are  
damaged, soiled, or changed in any  
other way.  
To ease accessibility to the seat belt buckle, an  
adjustable slider is available on the belt to help  
position the buckle when not in use.  
Seat belt tensioners or seat belt winders  
were modified.  
Seat belts can be imperceptibly damaged in  
the event of an accident. There is a risk of  
injury or danger to life. Keep clean and do  
not modify: seat belts, seat belt buckles, seat  
belt tensioners, seat belt winders, and seat  
belt anchors. After an accident, have the seat  
belts checked by an authorized service center  
or another qualified service center or repair  
shop.  
Unbuckling the seat belt  
1. Hold down the seat belt firmly.  
2. Press the red button in the seat belt buckle.  
3. Guide the seat belt back into the seat belt  
winder.  
113  
Online Edition for Part no. 01405B37D97 - II/24  
Seats, mirrors and steering wheel  
CONTROLS  
The seat belt reminder becomes active in the  
following situations:  
Middle seat belt in the rear  
Buckling the seat belt  
When the seat belt on the driver's side or  
on the passenger's side is not fastened.  
When the seat belt is unfastened while driv-  
ing.  
When objects are lying on a seat.  
Display in the instrument cluster  
The indicator light in the instrument cluster illu-  
minates after turning on the drive-ready state  
when the seat belt reminder is active.  
1. Release buckle tongue from the fixture on  
the rear shelf.  
A Check Control message is displayed where  
applicable. Check whether the seat belt has  
been fastened correctly.  
2. Insert the lower buckle tongue in the belt  
lock, arrow 1.  
Icon  
Meaning  
3. Insert the upper buckle tongue in the seat  
belt buckle, arrow 2.  
Seat belt on the driver's seat is  
not buckled.  
The seat belt buckles must engage audibly.  
Seat belt on the passenger  
seat or another seat in the ve-  
hicle is not buckled.  
Unbuckling the seat belt  
1. Hold down the seat belt firmly.  
2. Press the red button in the belt buckle.  
Seat belt is buckled on the cor-  
responding seat.  
3. Open the belt lock, arrow 2, with the buckle  
tongue, arrow 1.  
Seat belt is not buckled on the  
corresponding seat.  
Rear Occupant Alert  
Principle  
At the end of a trip, the system informs the  
driver of the possible presence of occupants on  
the rear seats.  
4. Guide the seat belt to the fixture on the rear  
shelf.  
General information  
Seat belt reminder  
If a door with access to the rear row seating  
is operated within 30 minutes before starting  
off, a message appears on the control display  
when the trip is completed and a signal tone  
sounds.  
General information  
Make sure that the seat belts are positioned  
correctly.  
114  
Online Edition for Part no. 01405B37D97 - II/24  
Seats, mirrors and steering wheel  
CONTROLS  
If the trip is continued within 30 minutes, the  
message is displayed again after the trip has  
been completed.  
Adjust the distance so that the head re-  
straint is as close as possible to the back  
of the head. Adjust the distance via the  
backrest tilt as needed.  
Activate/deactivate the function  
For manually adjustable head restraints:  
After adjusting, make sure that the head  
restraint is correctly engaged.  
1.  
Apps menu  
2. "System settings"  
3. "Rear Occupant Alert"  
4. Select the desired setting.  
Warning  
Body parts can be jammed when moving the  
head restraint. There is a risk of injury. Make  
sure that the area of movement is clear when  
moving the head restraint.  
Safety mode  
Depending on vehicle equipment, the driver  
and front passenger seat belt straps are auto-  
matically tightened once after driving off, if the  
seat belt is fastened.  
If necessary, in critical driving situations, e.g.,  
during emergency braking, the front seat belts  
are automatically pretensioned.  
Warning  
Objects on the head restraint reduce the pro-  
tective effect in the head and neck area.  
There is a risk of injury.  
After a critical driving situation without an acci-  
dent, the front seat belts are loosened again. If  
the belt tension does not loosen automatically,  
stop the vehicle and unbuckle the seat belt us-  
ing the red button in the buckle. Fasten the  
seat belt before continuing to drive.  
Do not use seat or head restraint covers.  
Do not hang objects, for instance clothes  
hangers, directly on the head restraint.  
Only use accessories that have been de-  
termined to be safe for attachment to a  
head restraint.  
Front head restraints  
Safety information  
Warning  
Do not use any accessories, for instance  
pillows, while driving.  
Adjusting the height: manual head  
restraints  
Removal or incorrect adjustment of head re-  
straints can cause injuries in the head and  
neck area. There is a risk of injury.  
Before driving, install the removed head  
restraints on the occupied seats.  
Adjust the head restraint so its center  
supports the back of the head at as  
close to eye level as possible.  
Press the button and push the head restraint  
up or down.  
115  
Online Edition for Part no. 01405B37D97 - II/24