Safety -> Exit warning for your BMW i5 2023-2025

Safety  
CONTROLS  
Depending on the vehicle equipment, the area  
around the vehicle in front of the vehicle is  
monitored as well. Two additional radar sen-  
sors are located in the front bumper.  
System limits  
General information  
Follow the system limits in the "Forward Colli-  
sion Mitigation" chapter.  
The system monitors the vehicle's surround-  
ings for a limited time after you get in or park.  
Detection range  
The following situations may not be detected,  
for instance:  
A possible risk of collision is indicated by vari-  
ous warning functions.  
Safety information  
Follow the safety information in the "Forward  
Collision Mitigation" chapter.  
Vehicle driving slowly in front and being ap-  
proached at high speed.  
Vehicles that suddenly swerve in front of  
you, or strongly decelerating vehicles.  
Sensors  
Vehicles with unusual rear designs.  
Two-wheeled vehicles ahead of you.  
Partially covered pedestrians or bikes.  
The system is controlled by the following sen-  
sors:  
Radar sensors, side, rear.  
Pedestrians that are not detected as such  
because of their contour or posture.  
Depending on the equipment: radar sen-  
sors, side, front.  
Pedestrians who are too small for the sen-  
sors to detect.  
Turning the exit warning on/off  
Exit warning  
Turning on the system automatically  
The exit warning activates automatically after  
departure if the function was switched on at  
the completion of the last trip.  
Principle  
The exit warning helps to avoid accidents.  
The system can warn the occupants when  
they are opening the doors and a risk of colli-  
sion with approaching objects is detected.  
Turning system off manually  
1.  
Apps menu  
2. "Vehicle"  
3. "Driving settings"  
4. "Driver Assistance"  
5. "Safety and warnings"  
6. "Exit warning"  
7. "Off"  
General information  
Depending on national-market version, this  
system activates automatically at the start of  
every drive.  
Two radar sensors in the rear bumper monitor  
the area behind the vehicle.  
190  
Online Edition for Part no. 01405B37D97 - II/24  
Safety  
CONTROLS  
Ambient light  
Adjusting the exit warning  
Depending on the equipment, warnings are  
also indicated by the ambient light in the inte-  
rior.  
1.  
Apps menu  
2. "Vehicle"  
3. "Driving settings"  
4. "Driver Assistance"  
5. "Safety and warnings"  
6. "Exit warning"  
Warning function  
Prewarning  
In the event of an advance warning, the warn-  
ing light in the exterior mirror illuminates. De-  
pending on the equipment, the ambient light  
also flashes.  
7. Select the desired setting.  
Depending on national-market  
version: Turning the warning tone  
on/off  
An object was detected in the opening area.  
Increased awareness is required.  
1.  
Apps menu  
2. "Vehicle"  
Acute warning  
3. "Driving settings"  
4. "Driver Assistance"  
5. "Safety and warnings"  
6. "Exit warning"  
In the event of an acute warning, the warn-  
ing light in the exterior mirror flashes, as does  
the ambient light, depending on vehicle equip-  
ment. In addition, a signal tone sounds.  
There is a risk of collision when opening the  
doors.  
7. "Warning tone"  
Depending on national-market version, the  
warning tone cannot be turned off.  
System limits  
Displays  
General information  
Follow the system limits in the "Collision warn-  
ing systems" chapter.  
Warning light in exterior mirror  
Detection range  
The following situations may not be detected,  
for instance:  
Fully or partially hidden objects.  
Stationary or very slow objects.  
Pedestrians.  
Functional limitations  
The system may be limited in the following  
situations:  
The warning light in the exterior mirror warns  
of a possible collision with a detected vehicle.  
191  
Online Edition for Part no. 01405B37D97 - II/24  
Safety  
CONTROLS  
The speed of an approaching vehicle is too  
fast or too slow.  
Safety information  
In curves.  
Warning  
In case of fully or partially hidden objects.  
The system cannot serve as a substitute  
for the driver’s personal judgment in assess-  
ing road and traffic situations. There is a  
risk of accident. Adjust driving style to traffic  
conditions. Watch surrounding traffic closely  
and actively intervene where appropriate Do  
not jerk the steering wheel in response to a  
warning.  
Lane Departure Warning  
with active return  
Principle  
The lane departure warning alerts when the  
vehicle is about to run off the road or exit the  
lane.  
Warning  
An automatic steering intervention helps to  
keep the vehicle in its lane.  
Indicators and warnings cannot serve as a  
substitute for the driver’s personal judgment.  
Due to its limits, the system may not issue  
warnings or responses, or these may be is-  
sued late or in a manner that is not consis-  
tent with their normal use. There is a risk of  
accident, injury, or property damage. Adjust  
driving style to traffic conditions. Watch sur-  
rounding traffic closely and actively intervene  
where appropriate  
General information  
Functional requirement  
The camera must detect the lane boundaries  
for the lane departure warning to be active.  
Sensors detect the traffic situation in their de-  
tection range.  
The areas of the sensors must be clean and  
clear.  
The system issues a warning starting at a min-  
imum speed. The minimum speed is country-  
specific and displayed on the control display.  
Sensors  
Warnings are displayed in the instrument clus-  
ter. In addition, the steering wheel vibrates.  
Depending on the equipment, the system is  
controlled by the following sensors:  
The system does not provide a warning if the  
turn signal is set in the respective direction be-  
fore exiting the lane.  
Camera behind the windshield.  
Front radar sensor.  
Radar sensor, side, front.  
192  
Online Edition for Part no. 01405B37D97 - II/24