Deutsch
EnglishParking -> Panorama View for your BMW i5 2023-2025
Parking
CONTROLS
This view can be used to position the vehicle
correctly within the washing system guide rails.
Turning the 3D view on/off
In a car wash, the vehicle must be able to roll
freely forward.
1.
Press the button.
2. "More"
Additional information:
3. "3D view"
To exit the 3D view, select another camera
Rolling or pushing the vehicle, refer to
page 131.
view on the left toolbar.
Panorama View
Car wash view
Principle
Principle
The panoramic view gives you an earlier view
of crossing traffic at blind driveway exits and
intersections.
The car wash view assists when entering a car
wash.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected
relatively late from the driver's seat. To pro-
vide greater visibility, the front camera and, de-
pending on vehicle equipment, rearview cam-
era cover the side of the vehicle.
Turning the car wash view on/off
1.
Press the button.
Depending on vehicle equipment, this func-
tion can turn on automatically when activation
points are saved.
2. "More"
3. "Car wash view"
To exit the car wash view, select a different
camera view in the left toolbar.
The camera image shows different levels of
distortion in some areas and is thus not suita-
ble for distance estimations.
Display
Depending on vehicle equipment, the function
can be used when driving forward or in re-
verse.
Follow the information in the "Parking assis-
tance systems" chapter.
Sensors
The system is controlled by the following cam-
eras:
▷
▷
Rearview camera.
Your own lane is displayed for easier driving
into a car wash.
Depending on the equipment: front camera.
254
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
Turning the panoramic view on/off
Functional requirements
▷
A GPS signal must be received.
▷
Depending on national-market version: A
BMW ID or driver profile must be activated.
1.
Press the button.
2. "Panorama view"
▷
▷
The reversing camera and front camera
must be installed.
To exit panorama view, select another
camera view on the left toolbar.
The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Display
Storing activation points
1. Drive your vehicle to the location where you
want the system to turn on, then stop.
2.
Press the button.
3. "Panorama view"
4. "Activation point"
Yellow lines on the screen display identify the
bumpers of your own vehicle.
The current position is displayed.
5. "Save activation point"
When reverse gear is engaged, the reversing
camera view is displayed. Depending on ve-
hicle equipment, the front camera view is dis-
played when forward gear is engaged.
Activation points are saved with the following
information, for example:
▷
▷
▷
With the city/town.
With the city/town and the street.
With the GPS coordinates.
Automatic activation of
panorama view
You can rename the location and street infor-
mation created automatically.
Using activation points
Principle
The use of activation points can be switched
on and off.
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
1.
Apps menu
2. "Vehicle"
General information
Up to ten activation points can be stored.
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
The activation points can be used when driv-
ing forward and, depending on national-mar-
ket version, when reversing.
6. "GPS-based"
Follow instructions in the Parking assistance
systems chapter.
255
Online Edition for Part no. 01405B37D97 - II/24
