Deutsch
EnglishParking -> Maneuver Assistant for your BMW i5 2023-2025
Parking
CONTROLS
ized service center or another qualified service
center or repair shop.
System limits
General information
Follow the system limits in the "Parking assis-
tance systems" chapter.
Maneuver Assistant
Principle
No parking assistance
The Maneuver Assistant provides support for
recurring parking and maneuvering situations.
The Automatic Parking Assistant does not of-
fer assistance in the following situations:
Parking and maneuvering operations can be
recorded and then carried out automatically by
the system.
▷
▷
▷
In tight curves.
For diagonal parking spaces.
Automatic Parking Assistant: for parking
spaces that are only marked with lines on
the ground. The system orients itself ac-
cording to objects.
Vehicle features and options
This system may not be available in the
owned vehicle, e.g. due to the selected op-
tional equipment, the national-market version
or the option for later enabling and software
updates. This also applies to individual func-
tions of the system.
▷
For special parking spaces, e.g., metered
parking spaces with automatic locking
mechanisms, or mechanical parking sys-
tems.
For information on whether a function is cur-
rently available in the vehicle or when the func-
tion can be installed in the vehicle, contact an
authorized service center or another qualified
service center or repair shop.
Functional limitations
The system may be limited in the following
situations:
▷
On bumpy road surfaces such as gravel
roads.
Additional information:
▷
▷
▷
On slippery ground.
Vehicle equipment, refer to page 8.
On steep uphill or downhill grades.
General information
A recurring maneuver is driven manually and
thereby recorded.
With accumulations of leaves/snow in the
parking space.
▷
▷
▷
In case of changes to an already-measured
parking space.
When the vehicle reaches the activation area
for the distance covered by the stored maneu-
ver, the maneuver can be activated on the con-
trol display or in the instrument cluster.
With ditches or edges, for instance an edge
of a port.
Parking spaces that are not suitable may
be detected or suitable parking spaces may
not be detected at all.
After the activation, the system takes control
of the vehicle and carries out the maneuver
automatically.
Malfunction
A Check Control message is displayed.
In addition, the parking maneuver can be per-
formed using Remote Control Parking on a
smartphone.
The Automatic Parking Assistant has malfunc-
tioned. Have the vehicle checked by an author-
Follow the information in the "Parking assis-
tance systems" chapter.
267
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
a stored maneuver can be displayed on the
control display.
Safety information
▷
Activation range, arrow 3: the stored
maneuver on the control display can be ac-
tivated within a range of approx. 3.5 ft/1 m.
After the activation, the system takes con-
trol of the vehicle and carries out the ma-
neuver automatically.
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react to
all traffic situations. There is a risk of acci-
dent, injury, or property damage. Adjust driv-
ing style to traffic conditions. Watch the sur-
rounding traffic situation closely, be ready to
take over steering and braking at any time,
and actively intervene where appropriate.
Sensors
The system is controlled by the following sen-
sors and cameras:
▷
Ultrasonic sensors in the front/rear bump-
ers.
▷
▷
▷
▷
Ultrasonic sensors, side.
Front camera.
Warning
The system can steer the vehicle over or
onto curbs. There is a risk of injury or risk
of damage to property. Watch surrounding
traffic closely and actively intervene where
appropriate
Top view cameras.
Rearview camera.
Recording maneuver
General information
Up to ten maneuvers can be recorded at differ-
ent locations.
Detection range
Up to four overlapping maneuvers can be re-
corded.
Identical maneuvers under different ambient
conditions can be recorded such as light condi-
tions.
For each maneuver, a maximum distance cov-
ered of 656 ft/200 m is possible.
In total, a distance covered of approx.
1,969 ft/600 m distributed to the ten possible
maneuvers can be recorded.
The detection range for a maneuver is divided
into the following areas:
▷
Proximity range, arrow 1: the system will
begin with the localization in the back-
ground within a range of approx. 26 ft/8 m
around the distance covered of a stored
maneuver.
Maneuvers with a distance covered of less
than 20 ft/6 m cannot be recorded.
▷
Close range, arrow 2: in a range of ap-
prox. 6 ft/2 m around the distance covered,
268
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
At the end of the parking operation, selec-
tor lever position P is set.
Recording maneuver
1. Drive the vehicle to the starting point from
which a maneuver must be recorded and
stop.
Canceling the Maneuver Assistant
manually
The vehicle can be controlled manually during
an active maneuver by taking the following ac-
tions:
2.
Press the button.
The parking assistance systems view is
displayed.
▷
Step lightly on the accelerator pedal twice
in succession.
3.
"Record new path"
4. Drive the vehicle to the desired end posi-
tion.
▷
Step lightly on the accelerator pedal and
move the steering wheel slightly at the
same time.
The maneuver is recorded.
When recording a route, do not drive faster
than 9 mph/15 km/h.
▷
Depress the brake pedal and operate the
selector lever at the same time.
While recording, the distance covered will
be displayed.
The Maneuver Assistant is canceled without
engaging selector lever position P. Driving can
continue immediately.
When the maximum distance covered or
the maximum speed is reached, a message
will be displayed and a signal tone will
sound.
Canceling the Maneuver Assistant
automatically
The system automatically cancels in situations
such as the following:
5. With a stationary vehicle: "Save recording"
6. "Name:"
▷
When the driver grasps the steering wheel
or takes over steering.
If necessary, enter the desired name for the
recorded maneuver.
▷
When operating the accelerator pedal or
the selector lever.
7. "Save recording"
Do not move the vehicle until the recording
has been stored.
▷
▷
▷
▷
▷
When the driver's seat belt is not fastened.
With open cargo area.
Performing stored maneuver
With open hood.
1. Drive the vehicle into the activation range
and stop. The control display and instru-
ment cluster indicate that a stored maneu-
ver can be activated.
With the doors open.
During activation or intervention by driver
assistance systems.
▷
▷
▷
▷
When the system limits of the ultrasonic
sensors and cameras are reached.
2.
: activate stored maneuver.
Green: after activation, the system takes
control of the vehicle and performs the ma-
neuver automatically. If applicable, follow
the instructions on the control display or in
the instrument cluster.
When changing over to another function on
the control display.
When the view on the control display is
overlaid with messages.
In case of obstacles.
The speed can be reduced with the brake.
Other interventions will cancel the system.
269
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
▷
▷
▷
On snow-covered or slippery road.
When the lane is too narrow.
stance other tires or changed ambient con-
ditions like light conditions or weather.
▷
▷
Delayed display of overlapping stored ma-
neuvers when driving into the activation
area.
On steep uphill or downhill grades.
In the event of an automatic cancellation of
the system, the vehicle is decelerated to a
complete stop and selector lever position P is
engaged.
In multi-story parking garages, for record-
ings at different parking levels, or for re-
cordings that run over several parking lev-
els.
An interrupted maneuver can be continued, if
needed. Turn the Maneuver Assistant on again
and follow the instructions on the control dis-
play or in the instrument cluster.
Remote Control Parking
Editing stored maneuvers
Individual or all maneuvers can be deleted or
renamed.
Principle
With Remote Control Parking, the vehicle can
be driven remotely when parking and maneu-
vering using the Maneuver Assistant and Park
Assist Professional.
1.
Apps menu
2. "Vehicle"
The maneuver is performed independently,
outside the vehicle, using a smartphone. This
makes it easy to get in and out of the vehicle.
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
When parking in a suitable spot, e.g., a garage,
you can correct the parking position with Re-
mote Control Parking by maneuvering slightly.
6. "Recorded paths"
7. Select the desired setting.
A maneuver that has already been started can
be continued at any time with Remote Control
Parking.
System limits
General information
Vehicle features and options
Follow the system limits in the "Parking assis-
tance systems" chapter.
This system may not be available in the
owned vehicle, e.g. due to the selected op-
tional equipment, the national-market version
or the option for later enabling and software
updates. This also applies to individual func-
tions of the system.
Functional limitations
System limits can cause functional limitations
such as in the following situations:
▷
▷
▷
With poor GPS reception.
For information on whether a function is cur-
rently available in the vehicle or when the func-
tion can be installed in the vehicle, contact an
authorized service center or another qualified
service center or repair shop.
On steep uphill or downhill grades.
In case of recorded maneuvers where the
system minimum distance to objects can-
not be maintained.
▷
Greatly deviating conditions when storing
and driving the distance covered, for in-
Additional information:
Vehicle equipment, refer to page 8.
270
Online Edition for Part no. 01405B37D97 - II/24
