Deutsch
EnglishParking -> Automatic activation of panorama view for your BMW i5 2023-2025
Parking
CONTROLS
Turning the panoramic view on/off
Functional requirements
▷
A GPS signal must be received.
▷
Depending on national-market version: A
BMW ID or driver profile must be activated.
1.
Press the button.
2. "Panorama view"
▷
▷
The reversing camera and front camera
must be installed.
To exit panorama view, select another
camera view on the left toolbar.
The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Display
Storing activation points
1. Drive your vehicle to the location where you
want the system to turn on, then stop.
2.
Press the button.
3. "Panorama view"
4. "Activation point"
Yellow lines on the screen display identify the
bumpers of your own vehicle.
The current position is displayed.
5. "Save activation point"
When reverse gear is engaged, the reversing
camera view is displayed. Depending on ve-
hicle equipment, the front camera view is dis-
played when forward gear is engaged.
Activation points are saved with the following
information, for example:
▷
▷
▷
With the city/town.
With the city/town and the street.
With the GPS coordinates.
Automatic activation of
panorama view
You can rename the location and street infor-
mation created automatically.
Using activation points
Principle
The use of activation points can be switched
on and off.
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
1.
Apps menu
2. "Vehicle"
General information
Up to ten activation points can be stored.
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
The activation points can be used when driv-
ing forward and, depending on national-mar-
ket version, when reversing.
6. "GPS-based"
Follow instructions in the Parking assistance
systems chapter.
255
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
Editing activation points
You can rename or delete specific activation
points or all of them.
System limits
The system does not provide a warning of ap-
proaching road users.
The vehicle's surroundings are distorted in the
display for technical reasons.
1.
Press the button.
Even if the door opening angle indicator on the
control display does not overlap with any other
objects, it is necessary to park carefully next to
other objects.
2. "Panorama view"
3. "Manage points"
A list of all saved activation points is dis-
played.
Because of the perspective, higher, protruding
objects may be closer than they appear on the
control display.
4. Select the desired setting.
Door opening angle
Remote 3D View
Principle
Principle
Depending on vehicle equipment, the door
opening angle display is shown automatically
when stationary.
The My BMW App and camera views in park-
ing view such as automatic camera perspec-
tive enable you to display the vehicle’s sur-
roundings on a mobile device.
This display helps estimate how far the doors
can be opened when parking.
The function displays a snapshot of the situa-
tion.
If obstacle marking is activated, the parking
view indicates fixed obstacles that obstruct the
opening angles of the doors.
General information
For reasons of data protection, the function
can only be used three times within two hours.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Follow the information in the "Parking assis-
tance systems" chapter.
Display
Sensors
The system is controlled by the following cam-
eras:
▷
▷
▷
Front camera.
Top view cameras.
Rearview camera.
Functional requirements
▷
Data transfer must be activated.
The maximum opening angle of the doors is
displayed in selector lever position P.
256
Online Edition for Part no. 01405B37D97 - II/24
