Deutsch
EnglishParking -> Active Park Distance Control for your BMW i5 2023-2025
Parking
CONTROLS
The system does not detect whether an obsta-
cle moves later on. When the vehicle is station-
ary, the gray shaded areas on the sides are
hidden after a certain time. The area on the
side of the vehicle must be newly captured.
Pressing the accelerator pedal interrupts the
brake intervention. Emergency braking is not
performed.
After emergency braking to a stop, further
creeping toward an obstacle is possible. Pro-
ceed with caution. To move forward, lightly
press the accelerator pedal and release as
needed.
Also follow the information on system limits in
the "Parking assistance systems" chapter.
Unwarranted warnings
Reaching the system limits can cause unwar-
ranted warnings.
If the accelerator pedal is depressed longer,
the vehicle drives off. Manual braking is possi-
ble at any time.
Follow the information in the "Parking assis-
tance systems" chapter.
To prevent unwarranted warnings, for instance
in car washes, turn off automatic Park Dis-
tance Control activation on obstacle detection.
Safety information
Malfunction
An icon is displayed on the control dis-
play.
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react to
all traffic situations. There is a risk of acci-
dent, injury, or property damage. Adjust driv-
ing style to traffic conditions. Watch the sur-
rounding traffic situation closely, be ready to
take over steering and braking at any time,
and actively intervene where appropriate.
Depending on vehicle equipment: The
sensor detection range may not be shown on
the control display.
A Check Control message is displayed.
Park Distance Control malfunction. Have the
vehicle checked by an authorized service cen-
ter or another qualified service center or repair
shop.
Active Park Distance Control
Sensors
The system is controlled by the following sen-
sors:
Principle
▷
▷
Ultrasonic sensors in the rear bumpers.
Ultrasonic sensors, side.
The Park Distance Control brake function ini-
tiates emergency braking if there is an acute
risk of collision.
Deactivating Active Park Distance
Control temporarily
After emergency braking, the function can be
temporarily deactivated on the control display.
A corresponding message is displayed.
General information
Due to system limits, a collision cannot be pre-
vented under all circumstances.
The function is available below walking speed
when driving in reverse or rolling backward.
1. "Configure"
2. "Deactivate temporarily"
260
Online Edition for Part no. 01405B37D97 - II/24
Parking
CONTROLS
During continued driving in this surrounding
situation, no further emergency braking will
occur.
When obstacles are detected behind the vehi-
cle, the system will brake.
Follow the information in the "Parking assis-
tance systems" chapter.
The function is automatically reactivated when
Park Distance Control is switched on again.
Safety information
Settings
It is possible to set which areas on the vehicle
will be protected by the system.
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react to
all traffic situations. There is a risk of acci-
dent, injury, or property damage. Adjust driv-
ing style to traffic conditions. Watch the sur-
rounding traffic situation closely, be ready to
take over steering and braking at any time,
and actively intervene where appropriate.
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
6. "Active PDC emergency braking"
7. Select the desired setting.
Display
Sensors
As soon as the system engages, an
icon is displayed with a corresponding
message.
The system is controlled by the following sen-
sors:
▷
Ultrasonic sensors in the front/rear bump-
ers.
System limits
▷
Ultrasonic sensors, side.
General information
Follow the system limits in the "Parking assis-
tance systems" chapter.
Functional requirements
▷
▷
▷
▷
Selector lever position D, B or R is engaged
when the vehicle is stationary.
Obstacles in the immediate vicinity are de-
tected in front of or behind the vehicle.
Drive-off monitoring
The accelerator pedal is heavily applied,
nearly to the end point.
Principle
In case of a risk of collision, the start-up mon-
itoring reduces the drive power when driving
off.
The accelerator pedal is immediately ap-
plied after engaging the selector lever posi-
tion and obstacle detection.
General information
Turning drive-off monitoring on/off
When obstacles are detected in close range in
front of the vehicle, the acceleration will be re-
duced. If necessary, this permits timely manual
braking.
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
261
Online Edition for Part no. 01405B37D97 - II/24
