Deutsch
EnglishNavigation -> Destination guidance for your BMW 1 Series 2011-2019
Navigation
Destination entry
Starting the trip
Options for intermediate destinations
After entering all intermediate destinations,
highlight the first destination and say "Start
guidance"
1. "Map"
2.
"Guidance"
3. "Display all trip destinations"
4. Select an intermediate destination.
> "Edit destination"
For example if the second destination is high-
lighted at the start of route guidance, then the
first destination is skipped over.
> "Reposition dest. in the trip": move the
The
ate destination.
symbol indicates the active intermedi-
intermediate destination within the list.
> "Delete dest. in the trip"
Storing a trip
> "Go to next dest. in the trip"
Up to 30 trips can be stored in the trip list.
Delete existing trips as necessary to permit you
to store new trips.
Some options are not possible for some trips.
Deleting a stored trip
1. "Navigation"
1. Open "Options".
2. "Store trip"
3. Enter a name.
4. "OK"
2. "Stored trips"
3. Select the desired trip.
4. Open "Options".
The trip is stored in the trip list under the
entered name.
5. "Delete all trips" or "Delete trip".
Selecting last trip
1. "Navigation"
2. "Stored trips"
3. "Last trip"
Selecting a stored trip
1. "Navigation"
2. "Stored trips"
3. Select the desired trip.
4. "Start guidance"
4.
"Start guidance"
Trips, changing
Changing the trip direction
Intermediate destinations are displayed in
reverse order in the list.
1. "Map"
2.
"Guidance"
3. Open "Options".
4. "Reverse order of trip dest."
142
Destination guidance
Navigation
Destination guidance
Vehicle equipment
Route criteria
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or country version. This also
applies to safety related functions and systems.
General information
>
>
>
You can influence the calculated route by
selecting certain trip criteria.
Route criteria can be changed during desti-
nation entry and during route guidance.
Street types are part of the navigation data
and are taken into account in route plan-
ning, e.g. avoiding highways.
Starting destination
guidance
>
>
>
The proposed route can differ from
personal experience.
1. "Navigation"
The settings are stored for the remote
control currently in use.
2. Entering a destination, refer to page 134.
3. "Accept destination"
4. "Start guidance"
Route guidance with traffic bulletins, refer
to page 149.
The route is displayed on the Control Display
after it is calculated.
Changing route criteria
1. "Navigation"
In the map view, the distance to the destination/
intermediate destination and the estimated
time of arrival are displayed.
2. "Map"
3.
"Route preference"
The arrow display appears on the Control
Display, if so desired.
4. Selecting a criterion:
>
"Fast route": time-optimized route
through a combination of the least pos-
sible distance and stretches of road that
allow rapid driving.
Terminating destination
guidance
>
>
"ECO PRO route": optimized
combination of the fastest and shortest
possible route.
1. "Navigation"
2. "Map"
3.
"Guidance".
"Short route": short distance without
taking time into account.
4. "Stop guidance"
> "Alternative routes": are suggested,
where possible, during active route
guidance.
Continuing destination
guidance
The individual suggestions are labeled in
color.
If the destination was not reached during the
last trip, destination guidance can be resumed.
"Resume guidance"
143
Navigation
Destination guidance
Lane information
In the arrow display, the recommended lanes
of multi-lane roads are each marked with a
triangle.
>
>
Filled triangle: optimum lane.
Empty triangle: likewise possible lane. It
can, however, also be possible to briefly
make additional lane changes.
5. Select additional route criteria, if desired.
Where possible, the selected criteria will be
avoided on the route.
Displaying the list of route segments
If the route guidance has been started, then you
can display a list of route segments. The dis-
tance to be traveled and traffic bulletins are
displayed for each segment of the route.
> "Avoid highways": highways are avoided
where possible.
> "Avoid toll roads": toll roads are avoided
1. "Navigation"
where possible.
2. "Route information"
3. Highlight the route segment.
> "Avoid ferries": ferries are avoided
where possible.
The route segment is displayed in the preview
map.
The setting applies to the current route and to
the planning of future routes.
Bypassing a section of the route
During route guidance, prompt the navigation
system to bypass certain route segments. In
doing so, you will specify how many kilometers
to travel before returning to the original route.
Route
General information
Depending on your vehicle's equipment, vari-
ous views of the route are available during route
guidance:
1. "Navigation"
2. "Route information"
3. "New route for"
>
>
>
Arrow display on the Control Display.
List of route segments.
Map view, refer to page 145.
Arrow display
The following information is displayed during
route guidance:
>
>
Large arrow: current direction of travel.
Small arrow: indicates the next change of
direction.
>
>
>
>
>
Intersection view.
4. Turn the controller: enter the desired
mileage.
Lane information.
Traffic bulletins.
5. Press the controller.
Distance to the next change of direction.
Street name of the next change of direction.
144
Destination guidance
Navigation
Resuming the original route
Repeating a voice instruction
1. "Navigation"
If the route section should no longer be
bypassed:
2. "Map"
1. "Navigation"
3. Highlight the
symbol.
2. "Route information"
3. "New route for"
4. "Remove blocking"
4. Press the controller twice.
Adjusting volume for voice instructions
The volume can be adjusted only while a voice
instruction is being issued.
Gas station recommendations
The remaining range is calculated and filling
stations along the route are displayed.
1. Have the last voice instruction repeated, if
necessary.
Even with the most up-to-date navigation data,
information about certain special destinations
may have changed; for example, filling stations
may not be in operation.
2. Turn the button during the voice instruction
to select the desired volume.
1. "Navigation"
2. "Route information"
3. "Recommended refuel"
A list of filling stations is displayed.
4. Select a gas station.
5. Select the
symbol.
6. "Start guidance": route guidance to the
selected filling station is started.
The setting is stored for the remote control cur-
rently in use.
"Add as another destination": the filling sta-
tion is incorporated into the route.
Map view
Destination guidance
through voice instructions
Displaying the map view
1. "Navigation"
2. "Map"
Switching voice instructions on/off
Voice instructions can be switched on or off
during destination guidance.
Overview
1. "Navigation"
2. "Map"
3.
"Voice instructions"
For rapid access, the feature can be stored on a
programmable memory key, refer to page 25.
145
Navigation
Destination guidance
1
2
3
4
5
6
7
Toolbar
Toolbar
Route segment with traffic obstruction
Road sign for traffic obstruction
Planned route
The following functions are available directly in
the map view:
Symbol
Function
Starting/stopping destination
guidance
Current location
Upper status box
Switching voice instructions on/
off
Lower status box
Changing route criteria or
selecting route alternatives
Lines on the map
Streets and roads are depicted with different
colors and lines according to their classification.
Dotted lines represent railroad and ferry con-
nections. National borders are depicted with
thin lines.
Special destinations
Displaying traffic bulletins
Interactive map
Map view settings
Changing scale
Traffic obstructions
Small triangles along the planned route identify
route segments with traffic obstructions,
depending on map scale. The direction of the
triangles indicates the direction of the obstruc-
tion.
Changing the map section
"Interactive map"
>
>
To shift the map: move the controller in the
required direction.
Road signs classify the obstructions.
>
Red road sign: the obstruction relates to the
planned route or direction of travel.
To shift the map diagonally: move the con-
troller in the required direction and turn it.
>
Gray road sign: the obstruction does not
relate to the planned route or direction of
travel.
Changing scale
1. Select the
symbol.
Traffic bulletins, refer to page 147.
2. Turn the controller to adjust the scale.
Planned route
Automatic scaling of the map
After route guidance is started, the planned
route is displayed on the map.
In the map view facing north, turn the controller
in any direction until AUTO is displayed as the
map scale.
The map shows the entire range from your
location to the destination.
Status boxes
Show/hide: press the controller.
>
>
Upper status box: time, phone details, and
entertainment details.
Settings for the map view
The map is shown on the Control Display.
1. Open "Options".
Lower status box: symbol for active route
guidance, traffic bulletin status, arrival time,
and distance from destination.
2. "Settings"
Set the optimized map view.
146
Destination guidance
Navigation
>
>
"Day/night mode"
Select and adjust depending on light
conditions.
Traffic bulletins
Overview
"Traffic conditions/gray map" active:
Settings are not taken into account.
>
You can display the traffic bulletins from
radio stations that broadcast the TMC
(Traffic Message Channel) of a traffic infor-
mation service. Bulletins about traffic
obstructions and hazards are continuously
updated.
"Satellite images"
Depending on the availability and resolu-
tion, satellite images are displayed in scales
of approx. 1 mile to 600 miles/2 km to
1,000 km.
>
>
Traffic bulletins are indicated by symbols on
the map.
>
>
"Perspective view in 3D"
Displays a three-dimensional view. Promi-
nent areas that are contained in the naviga-
tion data are displayed on the map in 3D.
Traffic bulletins for the surrounding area are
stored in a list.
The symbol in the toolbar of the map view
turns red if a traffic bulletin relates to the
calculated route.
"Traffic conditions/gray map"
The map is optimized for displaying traffic
bulletins. Symbols for the special destina-
tions are no longer displayed.
Real Time Traffic Information End-User
Provisions
Map view for the split screen display
Certain BMW models equipped with navigation
have the capability to display real-time traffic
information. If your system has this capability
the following additional terms and conditions
apply:
The map view for the split screen can be
selected separately from the main screen.
1. Open "Options".
2. "Split screen"
An End-User shall no longer have the right to
use the Traffic Data in the event that the End-
User is in material breach of the terms and
conditions contained herein.
3. Move the controller to the right repeatedly
until the split screen content is selected.
4. Select "Split screen content" or scale.
5. Select the map view:
> "Arrow display"
A. Total Traffic Network, a division of Clear
Channel Broadcasting, Inc. ("Total Traffic Net-
work") holds the rights to the traffic incident
data and RDS-TMC network through which it is
delivered. You may not modify, copy, scan or
use any other method to reproduce, duplicate,
republish, transmit or distribute in any way any
portion of traffic incident data. You agree to
indemnify, defend and hold harmless BMW of
North America, LLC. ("BMW NA") and Total
Traffic Network, Inrix, Inc (and their affiliates)
against any and all claims, damages, costs or
other expenses that arise directly or indirectly
out of (a) your unauthorized use of the traffic
> "Map facing north"
> "Map direction of travel"
> "Map view with perspective"
> "Position"
> "Exit ramp view"
> "Traffic conditions/gray map"
6. To change the scale: switch to the split
screen and turn the controller.
147
Navigation
Destination guidance
incident data or the RDS-TMC network, (b) your
violation of this directive and/or (c) any unautho-
rized or unlawful activities by you in connection
herewith.
Accessing traffic bulletins
1. "Navigation"
2. "Map"
3.
"Traffic Info"
B. Total Traffic Network traffic data is informa-
tional only. User assumes all risk of use. Total
Traffic Network, BMW NA, and their suppliers
make no representations about content, traffic
and road conditions, route usability, or speed.
First, the traffic bulletins for the calculated
route are displayed.
The traffic bulletins are sorted in the order
of their distance from the current vehicle
position.
C. The licensed material is provided to license
"as is," and "where is". Total Traffic Network,
including, but not limited to, any and all third
party providers of any of the licensed material,
expressly disclaims, to the fullest extent permit-
ted by law, all warranties or representations
with respect to the licensed material (including,
without limitation, that the licensed material will
be error-free, will operate without interruption
or that the traffic data will be accurate), express,
implied or statutory, including, without limita-
tion, the implied warranties of merchantability,
non-infringement fitness for a particular pur-
pose, or those arising from a course of dealing
or usage of trade.
4. Select a traffic bulletin.
"More information":
Display additional information.
5. Scroll to the next or previous traffic bulletin
if desired.
Traffic bulletins on the map
"Traffic conditions/gray map" active: the Con-
trol Display changes to a grayscale display. This
enables a better view of the traffic bulletins. The
day/night mode is disregarded in this setting.
Symbols or special destinations are no longer
displayed.
1. "Navigation"
D. Neither Total Traffic Network, Inrix, Inc. nor
BMW NA will be liable to you for any indirect,
special, consequential, exemplary, or incidental
damages (including, without limitation, lost rev-
enues, anticipated revenues, or profits relating
to the same) arising from any claim relating
directly or indirectly to use of the traffic data,
and even if Total Traffic Network, Inrix, Inc., or
BMW NA are aware of the possibility of such
damages. These limitations apply to all claims,
including, without limitation, claims in contract
and tort (such as negligence, product liability
and strict liability). Some states do not allow the
exclusion or limitation of incidental or conse-
quential damages, so those particular limita-
tions may not apply to you.
2. "Map"
3. Open "Options".
4. "Settings"
5. "Traffic conditions/gray map"
Symbols in the map view
Depending on the scale of the map and the
location of the traffic obstruction along the
route, the symbols for the traffic obstructions
are displayed.
Additional information in the map view
Depending on the map scale, a traffic obstruc-
tion's length, direction and impact are displayed
on the map using triangles or gray bars along
the calculated route.
Activating/deactivating reception
1. "Navigation"
>
>
>
Red: traffic congestion
Orange: stop-and-go traffic
Yellow: heavy traffic
2. Open "Options".
3. "Receive Traffic Info"
148
Destination guidance
Navigation
>
>
Green: clear roads
The upper part of the message shows:
Gray: general traffic information, e.g.
construction zone
>
The symbol of the first traffic obstruction,
possibly with the remaining distance before
the start of the traffic obstruction.
The bulletins displayed depend in the respec-
tive traffic information service.
>
>
Total length of traffic obstructions on the
route.
Filtering traffic bulletins
Extension of driving time due to the traffic
obstructions
Set which traffic bulletins are displayed on the
map.
The lower part of the message shows:
1. "Navigation"
>
Suggested alternate route with remaining
distance before the start of the alternate
route.
2. "Map"
3. Open "Options".
4. "Traffic Info categories"
5. Select the desired categories.
>
>
Difference of the route length compared to
the original route.
Time gained by taking the alternate route
compared to the original route with the
traffic obstructions.
In addition to the original route displayed in
white, the split screen will also show the alter-
nate route.
Taking an alternate route:
"Detour"
With particular hazards, e.g. objects on the
roadway, a message is displayed without a
possible alternate route.
Traffic bulletins from the selected categories
are displayed on the map.
It is also possible to take alternate routes can
also be taken if the traffic reports are accessed
via the list:
>
Traffic bulletins that lie on the route are
always shown.
>
For your personal safety, it is not possible to
hide traffic bulletins that announce a poten-
tial hazard.
1. "Navigation"
2. "Map"
3.
4. "Detour information"
5. "Detour"
"Traffic Info"
Route guidance with traffic bulletins
Semi-dynamic route guidance
With traffic bulletin reception switched on,
semi-dynamic route guidance is active.
Dynamic destination guidance
The route is automatically changed in the event
of traffic obstructions.
The system takes into account the existing traf-
fic bulletins during route guidance. A message
is displayed as a function of the route, the traffic
bulletins, and the possible alternate routes. In
the event of a traffic obstruction, an alternate
route will be suggested if possible.
>
The system does not point out traffic
obstructions along the original route.
>
Traffic bulletins will continue to be dis-
played on the map.
149
