Deutsch
EnglishLoading, storage and passenger compartment -> Rear seat ski hatch for your Volvo XC60 2017-2026
LOADING, STORAGE AND PASSENGER COMPARTMENT
•
•
•
Load anchoring eyelets
Rear seat ski hatch
The load anchoring eyelets in the cargo com-
partment can be used to secure objects with
straps, a net, etc.
The hatch in the rear seat backrest can be
opened to transport long, narrow objects
such as skis.
The illustration is generic - details may vary accord-
ing to vehicle model.
WARNING
1. In the cargo compartment, grasp the ski
hatch handle and pull it down.
Hard, sharp and/or heavy objects in or pro-
truding from the vehicle can cause injury in
the event of hard braking.
2. Fold down the armrest in the rear seat.
Always secure large and heavy objects
with a seat belt or cargo retaining straps.
If the private locking function is used, the ski
hatch must be closed.
Related information
Related information
Loading recommendations (p. 555)
•
•
•
Loading recommendations (p. 555)
•
Private Locking (p. 264)
Weights (p. 635)
•
558
* Option/accessory.
LOADING, STORAGE AND PASSENGER COMPARTMENT
Then put the other end piece in the recess
in the side panel on the opposite side.
Fitting the tailgate flap
Installing and removing the cargo
compartment cover*
In the fully open position, the cover and the
rear flap conceal objects in the cargo com-
partment.
Installing the cargo compartment
cover
Make sure the front flap is pointed down-
ward behind the backrest before the cas-
sette is put into place.
A flap should be mounted on the tailgate
when using the cargo compartment cover.
Push the end piece down on both sides,
one at a time.
1.
> When a click is heard and the red
marks on each end piece are no longer
visible, the cover is in place. Check that
it is secure.
Press the end piece on one side of the
cover into the retaining bracket in the side
panel of the cargo compartment.
Turn the flap so that the screw side faces
down and guide the pin into the bracket
on one side of the tailgate.
}}
* Option/accessory. 559
LOADING, STORAGE AND PASSENGER COMPARTMENT
|| 2. Squeeze together the flap slightly to make
it easier to guide the pin into place in the
bracket on the other side.
1.
Related information
•
Loading recommendations (p. 555)
3.
•
Pull the upper clips of the cover straight
out of the tailgate.
2.
Press the two upper clips in the respective
recess in the tailgate so it clicks into place.
Removing the cargo compartment
cover
In retracted position:
1. Press the button on one of the cover's
ends and lift out that end.
2. Carefully lift the cover up and out.
> The other end will release automatically
and the cover can then be lifted out of
the cargo compartment.
Carefully pull the flap out of the bracket on
one side of the tailgate and then the other.
If necessary, press the flap together
slightly to make it more flexible and facili-
tate removal.
Removing the tailgate flap
If the cargo compartment cover is not being
used, the rear flap should be removed.
560
* Option/accessory.
LOADING, STORAGE AND PASSENGER COMPARTMENT
Operating the cargo compartment
cover*
Loading mode
From the fully opened position:
The cover can be used in two positions: fully
open to completely cover the cargo compart-
ment or partially retracted to make it easier to
reach further into the cargo compartment.
–
Fully open
Cover in the fully open position.
Press the handle section of the cargo com-
partment slightly upward.
> The cover will move up until it stops in
the partially retracted position.
Grasp the handle and pull the cover out as
far as possible.
Returning to the fully open position from the
partially retracted position:
Press the attachment pins in the recesses
in the rear pillars of the cargo compart-
ment.
1. Grasp the handle and pull the cover down
as far as possible. Angle the handle
slightly upward so that the attaching pins
can more easily move past the first set of
grooves.
> The cover will be secured in the fully
open position.
The rear flap mounted on the inside of the tailgate
supplements the cargo compartment cover.
2. Release the handle so that the attaching
pins engage into the grooves.
> The cover will be secured in the fully
open position.
Do not place objects on top of the cargo
compartment cover.
}}
* Option/accessory. 561
LOADING, STORAGE AND PASSENGER COMPARTMENT
||
Installing and removing the steel
Installation
cargo grid*
When in the loading position, the cargo
compartment cover can obstruct visibility
to the rear. Make sure that the cargo com-
partment cover is fully extended or fully
retracted during driving.
The steel cargo grid prevents loads or pets in
the cargo compartment from being thrown
forward into the passenger compartment
during hard braking.
The steel cargo grid may only be used in
the rear position (behind the rear seat)
described here.
Before installing the steel grid, the existing
plastic ceiling mounting consoles must be
replaced with steel consoles. Volvo recom-
mends that the ceiling consoles are only
replaced by an authorized Volvo workshop or
retailer.
Retracting the cover
1. From the fully opened position:
Lift the cover's handle and pull it rearward
to release the cover's attaching pins from
the grooves. Let the cover retract.
From the partially retracted position:
1. Fold down the rear seat backrests.
Grasp the handle and pull the cover out of
the groves to the fully open position. Lift
the handle and pull it rearward to release
the cover's attaching pins from the
grooves. Let the cover retract.
2. Make sure that the steel grid is facing the
right direction. Lift the grid into the vehicle
through one of the rear doors.
For safety reasons, the steel grid must always
be installed and secured correctly.
2. Let the cover retract with its attaching
pins above the side panels until it stops in
the fully retracted position.
WARNING
Under no circumstances may a person be
in the cargo compartment when the vehi-
cle is moving. Heavy braking or a collision
could lead to serious injury.
Related information
•
562
* Option/accessory.
LOADING, STORAGE AND PASSENGER COMPARTMENT
3.
4.
Related information
Loading recommendations (p. 555)
•
•
Position the grid's attachment points in
the ceiling consoles.
Screw the provided screw into place using
the provided 6 mm Allen wrench. Repeat
on the other side. Recommended torque:
20 Nm (15 ft-lb).
The next step will be easier if two people
hold the steel grid in the right position.
> Check to make sure the steel grid is
securely in place.
5. Return the backrest to the upright posi-
tion.
For more information on necessary tools and
procedures for installing/removing, see the
assembly instructions provided with the steel
grid.
The steel cargo grid cannot be folded up or
down when a cargo compartment cover is
mounted.
563
LOADING, STORAGE AND PASSENGER COMPARTMENT
3. Insert the net's other upper hook into the
ceiling mounting point on the opposite
side.
Installing and removing the cargo
WARNING
net*
Objects in the cargo compartment must
always be securely anchored, even with a
correctly installed cargo net.
The cargo net helps prevent objects in the
cargo compartment from entering the pas-
senger compartment in the event of a sudden
stop or hard braking.
The telescopic spring-loaded hooks make
mounting easier.
Installing the cargo net
WARNING
Make sure that the net's hooks are pushed
forward as far as possible into their
respective mounting points.
The cargo net is attached at four points.
All of the cargo net's upper consoles,
hooks and straps must be securely moun-
ted and attached before the net is used.
Never use the net if it is damaged.
With front mounting, the cargo net is most
easily installed via a rear door.
1. Fold out the cargo net and make sure that
the upper rod folds out and locks into
position.
For safety reasons, the cargo net must always
be mounted and secured according to the fol-
lowing description.
2. Insert one of the net's hooks into the front
or rear ceiling mounting point with the
strap lock facing you.
The net is made of strong nylon weave and
can be attached in two different locations in
the vehicle:
Rear mounting - behind the rear seats.
Front mounting - behind the front seats.
•
•
564
* Option/accessory.
LOADING, STORAGE AND PASSENGER COMPARTMENT
5. Pull the straps until the cargo net is taut.
4.
Removing the cargo net
The cargo net can be easily removed and
folded up.
1. Loosen the cargo net by pressing the but-
ton on the strap locks on each side and
pulling to allow some slack.
2. Press in the catches and release both of
the strap hooks.
3. Unhook the upper hooks and remove the
net from the ceiling mounting points.
Front mounting.
Rear mounting.
4. Press the red button on the rod so that it
can be folded. Fold and roll up the net.
For front mounting:
For rear mounting:
With the cargo net mounted in the front
ceiling mounting points, hook the straps
into the outer eyelets on the front seat rails
behind the seats. Attaching the net is eas-
ier if the seat backrests are upright and the
seats are moved slightly forward.
Store the net in its case.
With the cargo net hooked into the rear
ceiling mounting points, attach the net's
straps into the front cargo anchoring eye-
lets in the cargo compartment.
Related information
Loading recommendations (p. 555)
•
•
Move the seat or backrest only until it
touches the net. Moving it with too much
force or applying too much pressure to the
net could lead to damage.
If a seat or backrest is pressed with too
much force back against the cargo net, the
net and its ceiling brackets could be dam-
aged.
565
MAINTENANCE AND SERVICE
