Lighting -> Using turn signals for your Volvo XC60 2017-2026
LIGHTING
Using turn signals
Active Bending Lights*
The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn
signals flash three times or continuously,
depending on how far up or down the lever is
moved.
Active Bending Lights (ABL) are designed to
help provide extra illumination in curves and
intersections. Depending on equipment level,
vehicles with LED3 headlights* may be equip-
ped with Active Bending Lights.
This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
•
•
If the turn signal indicator flashes more
quickly than normal, refer to the mes-
sage in the instrument panel.
Continuous flashing sequence
Move the lever up or down as far as possi-
ble.
The lever will stop in its end position and can
be moved back manually or automatically by
moving the steering wheel.
Related information
Hazard warning flashers (p. 161)
•
Turn signals.
Headlight pattern with function deactivated (left) and
activated (right).
Adjusting light functions via the center
display (p. 153)
•
Triple flash indicator
Active Bending Lights follow the movement of
the steering wheel to help provide extra illumi-
nation in curves and intersections, helping to
improve visibility for the driver.
Move the steering wheel lever up or down
to the first position and release. The turn
signals will flash three times. If the func-
tion is deactivated via the center display,
the signals will flash once.
The function is automatically activated when
the engine is started. If a fault is detected in
the system, the
symbol will illuminate in
the instrument panel and a message will be
displayed.
3
LED (Light Emitting Diode)
158
* Option/accessory.
LIGHTING
The function is only active in weak daylight or
dark conditions and only when the vehicle is
moving and the low beams are on.
The front fog lights turn off automatically
when the ignition is switched off or when the
Front fog lights/corner
illumination*
lighting ring is in position
.
The fog lights can be activated manually
when driving in fog and are activated auto-
matically when backing up to help augment
the backup light.
Deactivating/activating the function
The function is activated as the default factory
setting and can be activated and deactivated
in the center display's Function view:
Regulations concerning fog light use vary
from country to country.
If the vehicle is equipped with corner illumi-
nation*, the fog lights are activated automati-
cally in weak daylight or dark conditions to
illuminate the area diagonally in front of the
vehicle.
Tap the Active Bending
Lights button.
Cornering illumination*
The front fog lamps can include the cornering
lights function, which temporarily illuminates
the area diagonally in front of the car in the
direction the steering wheel is turned on a
sharp bend, or in the direction shown by the
direction indicators.
Related information
Adjusting light functions via the center
display (p. 153)
•
The function is activated in weak daylight or
dark conditions when the lighting ring is in
•
or
mode and the vehicle speed is
less than about 30 km/h (about 20 mph).
Both cornering illumination are also illumi-
nated as a complement to the taillights when
reversing.
Front fog lights button.
The function is activated as the default factory
setting and can be activated and deactivated
using the center display.
The front fog lights can be turned on when the
ignition is in mode II and the lighting ring is in
position
Tap the button to activate or deactivate the
function. The symbol in the instrument
,
or
.
Related information
Lighting control and panel (p. 152)
•
•
•
Ignition modes (p. 385)
panel comes on when the front fog lights are
on.
}}
* Option/accessory. 159
LIGHTING
The rear fog light turns off automatically when:
•
•
Rear fog light
The rear fog light is considerably brighter
than ordinary taillights and should only be
used to help other road users see the vehicle
when visibility is reduced by conditions such
as fog, snow, smoke or dust.
Adjusting light functions via the center
display (p. 153)
the ignition is off or the lighting ring is in
the position.
the lighting ring is in the
•
position
•
and the front fog lights are turned off.
Regulations concerning rear fog light use
vary from country to country.
Related information
Lighting control and panel (p. 152)
•
•
Ignition modes (p. 385)
•
Rear fog light button.
The rear fog light consists of a light on the rear
of the vehicle on the driver's side.
The rear fog light can only be used when:
ignition mode II is active and the lighting
ring is in position or
•
the lighting ring is in the
position
•
and the front fog lights are on.
Press the button to switch on/off. The
symbol in the instrument panel illuminates
when the rear fog light is on.
160
* Option/accessory.





