Lighting -> Hazard warning flashers for your Volvo XC40 2018-2026
LIGHTING
Emergency brake lights
Emergency brake lights are activated to alert
vehicles behind about heavy braking.
Hazard warning flashers
Hazard warning flashers warn other road
users by means of all of the car's direction
indicators being activated simultaneously.
The function can be used to give a warning in
the event of traffic hazards.
Regulations for the use of hazard warning
flashers may vary between countries.
The function means that the brake light
flashes instead of - as in normal braking -
shining with a constant glow.
The emergency brake lights are activated dur-
ing heavy braking or if the ABS system is acti-
vated at high speeds.
Related information
•
Using direction indicators (p. 143)
•
After the driver brakes to a low speed and
then releases the brake, the brake light returns
to normal glow.
The car's hazard warning flashers are acti-
vated at the same time. These flash until the
driver accelerates the car to a higher speed
again or switches off the car's hazard warning
flashers.
Button for hazard warning flashers.
Related information
Press the button to activate the hazard warn-
ing flashers.
Brake lights (p. 146)
•
•
•
Foot brake (p. 401)
The hazard warning flashers are automatically
activated when the car brakes so powerfully
that the emergency brake lights are activated
and the speed is low. The hazard warning
flashers start to flash after the emergency
brake lights have stopped flashing and are
then deactivated automatically when the car
drives away again or are deactivated if the but-
ton is depressed.
147
LIGHTING
Using home safe lighting
Approach light duration
Interior lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
Approach lighting is switched on when the
car is unlocked and is used to switch on the
car's lighting at a distance.
The passenger compartment is equipped
with several types of lighting, e.g. general
interior lighting, adjustable decor illumination
and reading lighting.
To activate the function:
The function is activated when the remote
control key is used for unlocking. In daylight,
position lamps, interior roof lamps, floor lights
and cargo area lighting are activated. In weak
daylight or darkness, number plate lighting
and lighting in the outer handles are also acti-
vated* with their light source aimed towards
the ground.
1. Switch off the car.
All lighting in the passenger compartment can
be switched on and off manually at least
5 minutes from when:
2. Move the left-hand stalk switch forward
toward the instrument panel and release.
the car has been switched off and its elec-
•
3. Get out of the car and lock the door.
trical system is in ignition position 0
> A symbol in the driver display is illumi-
nated to indicate that the function is
activated and outer lighting is switched
on: Position lamps, headlamp beams,
number plate lighting and lighting in
outer handles*.
the car has been unlocked but it has not
yet been started.
•
The lighting stays on for approx. 2 minutes if
no doors are opened. If a door is opened
within the activation time, the time for the
interior lighting and lighting in the outer han-
dles* will be extended.
Front roof lighting
The length of time that home safe lighting
remains on can be set via the centre display.
The function can be activated and deactivated
via the centre display.
Related information
Related information
Adjusting light functions via the centre
display (p. 139)
•
Adjusting light functions via the centre
display (p. 139)
•
•
Remote control key (p. 219)
•
•
Controls in roof console for the front reading lamps
and passenger compartment lighting.
Reading lamp, left-hand side
Passenger compartment lighting
148
* Option/accessory.





