Deutsch
EnglishDriver support -> Limitations of BLIS for your Volvo XC40 2018-2026
DRIVER SUPPORT
Limitations of BLIS
The BLIS100 function may have limitations in
certain situations.
WARNING
BLIS does not work on sharp bends.
•
•
BLIS does not work when the car is
reversing.
This function uses the car's radar units,
which have certain general limitations.
Related information
BLIS* (p. 343)
•
Limitations for camera and radar unit
(p. 387)
•
Keep the surface indicated clean – on both the left
and right-hand sides of the car101
.
Examples of limitations:
Dirt, ice and snow covering the sensors
may reduce the functions and deactivate
alerts.
•
•
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle rack or similar is
connected to the car's electrical system.
For good performance of BLIS, there
should be no bicycle rack, luggage carrier
or similar mounted on the car's towbar.
100
101
Blind Spot Information
NOTE: The illustration is schematic - details may vary depending on car model.
* Option/accessory. 345
DRIVER SUPPORT
Messages for BLIS
A number of messages regarding BLIS102 can
be shown in the driver display. Here are some
examples.
Message
Specification
The system does not function as it should. A workshop should be contactedA.
Blind spot sensor
Service required
BLIS and CTAB have been deactivated as a trailer has been connected to the car's electrical system.
Blind spot system off
Trailer attached
A
An authorised Volvo workshop is recommended.
Cross Traffic Alert*
B
A text message can be cleared by briefly
pressing the button, located in the centre
of the steering wheel's right-hand keypad.
If a message persists, contact a workshopA.
Related information
BLIS* (p. 343)
•
Cross Traffic Alert* (p. 349)
•
102
Blind Spot Information
346
* Option/accessory.
