Deutsch
EnglishDisplays and voice control -> Outside temperature gauge for your Volvo XC40 2018-2026
DISPLAYS AND VOICE CONTROL
zone is then adjusted automatically based on
the location of the car. For certain types of
navigation systems, the current location
(country) must also be set to obtain the right
time zone. If Auto Time is not selected, time
and data are adjusted with arrow up or arrow
down on the touch screen.
Date and time
The clock is shown in both the driver display
and the centre display.
Outside temperature gauge
The outside temperature is shown in the
driver display.
A sensor detects the temperature outside of
the car.
Clock location
Summer time
In certain countries, it is possible to select the
Auto Daylight Saving Time setting for auto-
matic setting of summer time. For other coun-
tries, the Daylight Saving Time setting can
be selected manually.
Related information
Driver display (p. 75)
•
Other settings in the centre display's top
view (p. 120)
•
In certain situations, messages and informa-
tion may cover the clock in the driver display.
If the car has been stationary, the gauge may
display a temperature reading that is too high.
In the centre display, the clock is located at
the top right of the status bar.
When the outside temperature is in
the range –5 °C to +2 °C (23 °F to
36 °F), a snowflake symbol lights up
that warns of potentially slippery
conditions.
Date and time settings
–
Select Settings System Date and
Time in the centre display's top view to
change settings for time and date format.
Change the unit for the temperature gauge,
etc. via system settings in the centre display's
top view.
Adjust the date and time by pressing the
up or down arrow on the touch screen.
Automatic time for cars with GPS
When the car is equipped with a navigation
system, Auto Time can be selected. The time
Related information
Driver display (p. 75)
•
Changing system units (p. 120)
•
82
DISPLAYS AND VOICE CONTROL
Indicator symbols in the driver
display
The indicator symbols alert the driver that a
function is activated, that a system is operat-
ing, or that a fault or abnormal condition has
occurred.
Symbol Specification
Automatic brake on
Symbol Specification
Left and right-hand direction
indicator
The symbol illuminates when the
function is activated and the foot
brake or parking brake is acting.
The brake holds the car station-
ary when it has stopped.
The symbol flashes when the
direction indicators are used.
Symbol Specification
Information, read display text
Tyre pressure system
When one of the car's systems
does not behave as intended,
this information symbol illumi-
nates and a text appears on the
driver display. The information
symbol can also illuminate in
conjunction with other symbols.
Position lamps
The symbol illuminates when tyre
pressure is too low. If there is a
fault in the tyre pressure system,
the symbol will flash for approx. 1
minute and then illuminate with a
constant glow. This may be
because the system cannot
detect or warn of low tyre pres-
sure as intended.
The symbol lights up when the
position lamps are switched on.
Fault in the headlamp system
The symbol illuminates if a fault
has occurred in the ABL function
(Active Bending Lights) or if
another fault has occurred in the
headlamp system.
Fault in brake system
The symbol lights up when there
is a fault in the parking brake.
Emissions system
Active main beam on
ABS fault
If the symbol illuminates after the
engine has been started then it
may be due to a fault in the car's
emissions system. Drive to a
workshop for checking. Volvo
recommends that an authorised
Volvo workshop is contacted.
The symbol lights up blue when
active main beam is on.
If this symbol illuminates then
the system is not working. The
car's regular brake system con-
tinues to work, but without the
ABS function.
Active main beam off
The symbol lights up white when
active main beam is off.
}}
83
