Deutsch
EnglishInstruments and controls -> Multi-function display for your Subaru Forester 2019-2024
Multi-function display (black and white) 201
! How to change the information dis-
NOTE
3-8. Multi-function display
(black and white)
play
The indicated values vary in accor-
dance with changes in the vehicle’s
running conditions. Also, the indicated
values may differ slightly from the
actual values and should thus be
treated only as a guide.
NOTE
For models with multi-function display
(color LCD), refer to “Multi-function
display (color LCD)” �P205.
& Driving information display
NOTE
You can set the units for both the multi-
function display (black and white) and
the combination meter at the same
time. For details about setting the
language and units, refer to “Menu
screens” �P199.
1
INFO button
Pressing the INFO button on the steering
wheel switches changes the display to the
following sequence.
1
2
3
4
Outside temperature indicator
X-MODE indicator (if equipped)
Driving information display
Clock
With the ignition switch in the “ACC”
position, the clock appears on the display.
With the ignition switch in the “ON” posi-
tion, the outside temperature indicator,
driving information display and clock all
appear on the display.
– CONTINUED –
Multi-function display (black and white)
202
the average rate of fuel consumption.
! Average fuel consumption
! Driving range on remaining fuel
1
2
When setting the displayed unit as MPH
When setting the displayed unit as km/h
1
Displays the driving range per gallon of
fuel
2
3
Displays the driving range per liter of fuel
Displays the fuel consumption per 100
km
If the driving range is shown as “
is only a tiny amount of fuel left in the tank.
”, there
NOTE
This display shows the average rate of fuel
consumption since the trip meter was last
reset.
The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.
1
2
When setting the displayed unit as MPH
When setting the displayed unit as km/h
The driving range indicates the distance
that can be driven taking into account the
amount of fuel remaining in the tank and
Multi-function display (black and white) 203
! Average vehicle speed
! Current fuel consumption
1
TRIP RESET switch
1
2
When units in miles is selected
When units in km is selected
1
Displays the driving range per gallon of
fuel
Displays the driving range per liter of fuel
Displays the fuel consumption per 100
km
Press the TRIP RESET switch to switch
between the displays for the average fuel
consumption that corresponds to the A trip
meter mileage and the average fuel con-
sumption that corresponds to the B trip
meter mileage.
When the trip meter displays is reset, the
corresponding average fuel consumption
value is also reset.
2
3
This display shows the average vehicle
speed since the trip meter was last reset.
Pressing the TRIP RESET switch toggles
the display between the average vehicle
speed corresponding to the A trip meter
display and the average vehicle speed
corresponding to the B trip meter display.
This indication shows the rate of fuel
consumption at the present moment.
When either of the trip meter displays is
reset, the corresponding average vehicle
speed value is also reset.
NOTE
When the trip meter display is reset, the
average fuel consumption correspond-
ing to that trip meter display is not
shown until the vehicle has subse-
quently covered a distance of 1 mile
(or 1 km).
NOTE
When either trip meter display is reset,
the average vehicle speed correspond-
ing to that trip meter display is not
shown until the vehicle has subse-
– CONTINUED –
Multi-function display (black and white)
204
quently covered a distance of 1 mile (or
1 km).
when passing through a tunnel)
– When starting the engine after
being parked for a certain period
of time
The temperature unit cannot be
changed.
& Outside temperature indica-
tor
! Turn off display of driving informa-
tion display
.
Select the blank space in the menu to exit
the driving information display selection.
! Road surface freeze warning indi-
NOTE
cation
.
The average fuel consumption and
average vehicle speed are calcu-
lated even while the driving informa-
tion display is not displayed.
.
Even if you turn off the driving
information display, the display will
automatically turn on when the bat-
tery voltage is disconnected and
then reconnected for battery repla-
cement or fuse replacement.
1
2
U.S.-spec. models
Except U.S.-spec. models
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature
may not be indicated correctly or
the update may be delayed in the
following conditions.
1
2
U.S.-spec. models
Except U.S.-spec. models
When the outside temperature drops to a
certain temperature or lower, the tempera-
ture indication flashes for 5 seconds to
show that the road surface may be frozen.
If the display is already indicating that the
outside temperature is low when the
ignition switch is turned to the “ON”
position, the indication does not flash.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example:
when going in and out of an
underground parking area or
Multi-function display (color LCD) 205
& Features
The multi-function display (color LCD) has
the following functions.
NOTE
3-9. Multi-function display
(color LCD)
The outside temperature indication
may differ from the actual outside
temperature. The road surface freeze
warning indication should be treated
only as a guide. Be sure to check the
condition of the road surface before
driving.
NOTE
Description
Page
Displays useful messages, such
as notification, etc.
For models with multi-function display
(black and white), refer to “Multi-func-
tion display (black and white)” �P201.
207
Displays basic screens (e.g. fuel
consumption screen, etc.)
207
226
Sets and adjusts maintenance
notification
WARNING
& X-MODE indicator (if
equipped)
Always pay adequate attention to
safe driving when operating the
multi-function display (color LCD)
while the vehicle is in motion. When
operation of the multi-function dis-
play (color LCD) is disturbing your
awareness and ability to concen-
trate on driving, stop the vehicle in
a safe place before performing op-
erations on the screen. Also, do not
concentrate on the display while
driving. Doing so may cause you to
look away from the road and could
result in an accident.
Also, the multi-function display (color LCD)
can also be used to set and initialize the
multi-function display (color LCD) itself.
This indicator will be shown while X-MODE
is activated. It will turn off when X-MODE is
deactivated.
NOTE
& Clock
For details about clock setting, refer to
“Clock” �P228.
.
.
When the vehicle is in motion,
certain functions and selections
may not be available.
You can set the language and units
for both the multi-function display
(color LCD) and the combination
meter at the same time. For details
about setting the language and
units, refer to “Menu screens”
�P199.
.
The images displayed in this Own-
er’s Manual are sample images. The
actual image may vary depending on
the market and vehicle specifica-
tions.
– CONTINUED –
Multi-function display (color LCD)
206
When the checks are performed, the color
of the icon corresponding to the checked
item will change.
If there is a notification, the message will
be displayed. Take the appropriate actions
based on the message indicated.
After the self-check is completed, today’s
date, the stored birthday or the stored
anniversary is displayed.
& Welcome screen
When the driver’s door is opened and
closed, the welcome screen will appear for
a short time.
& Self-check screen
NOTE
When the setting is “On”, the self-
check screen appears. For details
about this setting, refer to “On/Off
setting” �P226.
NOTE
.
The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
When the ignition switch is turned to the
“ON” position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several seconds each.
NOTE
.
.
The welcome screen can be set to on
or off. For details, refer to “Screen
Settings” �P199.
For a certain period of time after the
welcome screen has once appeared,
it may not appear again even when
the driver’s door is opened and
closed again. This does not indicate
a malfunction.
.
After performing the maintenance,
change the setting of the corre-
sponding maintenance item. For de-
tails, refer to “Maintenance settings”
�P226.
.
The maintenance notification screen
will be displayed under either of the
following conditions.
– The period of time remaining until
the registered notification date is
15 days or less.
– The total driving distance remain-
ing until the registered notifica-
tion distance is approximately
311 miles (500 km) or less.
The maintenance notification screen
will be displayed until either of the
following conditions is satisfied.
– The period of time passed after
the registered notification date is
15 days or more.
1
2
Engine oil: Checks the interval of engine
oil replacement.
Oil filter: Checks the interval of oil filter
replacement.
Tires: Checks the interval of tire rotation.
Inspection and maintenance: Checks the
interval of inspection and maintenance.
.
3
4
Multi-function display (color LCD) 207
– The total distance driven after the
registered notification distance
is approximately 311 miles (500
km) or more.
& Basic operation
& Basic screens
& Interruption screen
Control switch
1
2
3
4
INFO button
/SET
Example
Press the INFO button on the steering
wheel to switch the item displayed on the
basic screen. You can operate the items
on the setting screen by using the “ ”,
Useful messages, such as reminder in-
formation, weather information (if
equipped) and traffic information (if
equipped) may interrupt the current screen
and appear on the display accompanied
by a beep. Take proper action according to
the message.
“
” and “ /SET” switches.
1
2
3
4
Clock
Climate control*
Outside temperature
Information screen
The interruption screen will return to the
original screen after a few seconds. Also,
you can press the INFO button to skip the
interruption screen.
– CONTINUED –
Multi-function display (color LCD)
208
*: This is not displayed on the multi-function
display (color LCD) when the ignition switch
is in the “ACC” position.
control panel” �P261.
! Clock
! Climate control screen
The climate control status is displayed on
the multi-function display (color LCD).
The clock can be displayed in either 12-
hour display or 24-hour display. For details
about the setting, refer to “Clock” �P228.
While the ignition switch is in the “ACC” or
“ON” position, the basic screen will be
displayed.
! Outside temperature indicator
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature
may not be indicated correctly or
the update may be delayed in the
following conditions.
Climate control screen
1
2
3
4
5
Set temperature indicator (left-hand side)
FULL AUTO indicator
AUTO indicator
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example:
when going in and out of an
underground parking area or
when passing through a tunnel)
– When starting the engine after
being parked for a certain period
of time
Airflow mode indicator
Set temperature indicator (right-hand
side)*1
6
7
8
9
Air inlet selection indicator
SYNC indicator*1
Fan speed indicator
Air conditioner ON indicator
*1: Models with the SYNC function only
.
The temperature unit cannot be
changed.
When operating the climate control sys-
tem, the basic screen switches to the
climate control screen. For details about
climate control operation, refer to “Climate
Multi-function display (color LCD) 209
! Information screen
Press the INFO button on the steering wheel to switch the item displayed on the information screen.
Content
Description
Displays the operating status of the electric components and equipment.
Displays the status of your vehicle.
Page
210
210
211
211
212
212
213
213
213
214
Electric components operating status screen*1
Prevention safety screen
EyeSight screen
Displays the operating status of EyeSight.
Displays up to 3 optional items.
Favorite screen
Weather information screen*2
Traffic information*2/Navigation*3 screen
Audio screen*3
Displays weather information.
Displays information linked with the navigation system.
Displays audio system information.
Fuel consumption screen
Clock/date screen
Displays fuel consumption information.
Displays the clock.
Guidance screen
Moves to the setting screen.
*1: If equipped
*2: Models with SiriusXM Satellite Radio
*3: Models with navigation system
– CONTINUED –
Multi-function display (color LCD)
210
3. Pull the “ /SET” switch to enter the
selected item.
! Electric components operation
screen (if equipped)
NOTE
.
Indicators do not display for func-
tions that are not equipped to the
vehicle.
.
The indicators of functions that are
not operating are displayed in gray.
! Prevention safety screen
X-MODE screen
1
2
Vehicle posture
X-MODE
1
2
BSD/RCTA*
Reverse Automatic Braking (RAB) sys-
tem*
Lane Departure Warning indicator
Pre-Collision Braking System indicator*
High beam assist
Front view monitor*
Driver Monitoring System*
This screen displays the driving status of
the vehicle and the operation status func-
tions. For functions that are operating, the
indicator will illuminate or flash.
3
4
5
6
7
NOTE
.
.
The vehicle posture indication may
differ from the actual vehicle pos-
ture.
When X-MODE has turned on, the
screen of the multi-function display
is switched to the prevention safety
screen.
The vehicle posture angle varies not
only due to the angle of the road
surface, but also due to the vehicle
*: If equipped
1
2
3
4
Telltale screen
Steering angle
Vehicle posture
Running condition
This screen displays the electric compo-
nents operation status of the vehicle.
1. Press and hold the “INFO” button to
enter the menu screen.
2. Operate the “ ” or “ ” button to
select the preferred item.
.
Multi-function display (color LCD) 211
tilt caused by the occupants, cargo,
and acceleration or deceleration.
Item
Details
! Favorite screen
The engine coolant temperature is
displayed.
! EyeSight screen
The engine oil temperature is
displayed.
The average vehicle speed is
displayed.
The accelerator opening ratio is
displayed.
Favorite screen (display example)
This screen displays up to three optional
pieces of information that can be selected
from the following items.
1
2
3
4
5
6
7
Lead vehicle indicator
Your own vehicle indicator
Stop lights
Road line indicator
Lane indicator
The vehicle posture is displayed.
The current rate of fuel consump-
tion is displayed.
Lane Centering indicator
Steering wheel indicator
This screen displays the status of the
EyeSight system. The lead vehicle indica-
tor moves forward and backward depend-
ing on the distance with the vehicle in front.
For details, refer to the Owner’s Manual
supplement for the EyeSight system.
The direction of the vehicle is
displayed.*1
The weather information is dis-
played.*2
– CONTINUED –
Multi-function display (color LCD)
212
Item
Details
.
.
The weather forecast for the set
destination remains displayed until
a new destination is set or until you
reach the destination.
Depending on the reception timing
of XM, the display of weather infor-
mation may be delayed.
! Weather information screen (if
equipped)
The posted speed limit of the road
you are currently driving on is
displayed.*1
The calendar is displayed.
! Navigation screen (models with
navigation system)
Driver Monitoring System infor-
mation is displayed.*1
Nothing is displayed.
1
2
Weather information for the destination*
Weather information for the current loca-
tion
*1: If equipped
*2: Models with SiriusXM Satellite Radio
*: Only when a destination is set in the
navigation system
NOTE
The weather information is displayed on
the screen.
Some displayed items may not be
displayed depending on the model
and specifications.
The navigation system information to the
destination is displayed on the screen.
NOTE
The items shown in the favorite screen can
be changed. For details, refer to “Favorite
setting” �P223.
.
When all of the following conditions
are satisfied, weather information is
displayed.
NOTE
When a destination is not set in the
navigation system, the compass orien-
tation, name, route sign and speed limit
of the road the vehicle is traveling on
remain displayed on the screen.
– The vehicle is equipped with an
audio and navigation system for
SiriusXM satellite radio.
– You have a current SiriusXM
satellite radio subscription.
Multi-function display (color LCD) 213
warning light illuminates.
! Audio screen
! Fuel consumption screen
! Clock/date screen
1
2
Driving range on remaining fuel
Average fuel consumption corresponding
to the driving distance of each trip meter
Current fuel consumption
User information (if equipped)
The screen of the currently selected audio
source is displayed.
For details about how to use the audio set,
refer to the separate navigation/audio
Owner’s Manual.
The time and date are displayed.
You can adjust the time and date. For
details, refer to “Clock” �P228.
3
4
The fuel consumption information is dis-
played on the screen.
If the driver is recognized by the Driver
Monitoring System, average fuel con-
sumption for the driver will be displayed.
NOTE
The driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
– CONTINUED –
Multi-function display (color LCD)
214
& Setting screen
! Guidance screen
1. Press and hold the INFO button on the
guidance screen. The top menu is
displayed.
2. Operate the “ ” or “ ” switch to
select the preferred menu from the
top menu.
3. Pull the “ /SET” switch to enter the
selected menu.
4. Operate the “ ” or “ ” switch to
select the preferred menu from the
2nd menu.
5. Pull the “ /SET” switch to enter the
selected menu.
NOTE
When the combination meter display
(color LCD) is displaying the menu
screen entering screen, the system will
not move to the setting screen even if
the INFO button is pressed and held.
When the INFO button on the steering
wheel is pressed and held on this screen,
the setting screen can be displayed.
For details, refer to “Setting screen”
�P214.
Multi-function display (color LCD) 215
The menu lists are as follows.
Items that can be set when stopped:
Top menu
2nd menu
Description
Page
217
217
—
Birthday
Set a birthday.
Date
Anniversary
Set an anniversary day.
Return to the 1st menu.
Perform the user recognition.
Go Back
Repeat facial scan
User Recognition
Yes or No
217
222
Turn the user recognition settings on or off.
On or Off
On or Off
Turn the automatically retract seat on entry
function on or off.
Automatically retract seat on entry
Register User
222
Register the user.
218
221
222
220
221
—
Driver Moni-
toring System Update User Settings
Delete Driver Position
Delete User
Re-register the driver’s position.
Delete the registered driver’s position.
Delete the registered user.
Delete the registered all user.
Return to the 1st menu.
Delete All Users
Go Back
Yes or No
Yes or No
Screen Off*
Turn the screen off.
223
223
223
224
—
Favorite
Set and customize the triple meter.
Set the bypass screen for each item.
Adjust the beep sound volume.
Return to the 1st menu.
Display/Beep Bypass Screen
Beep
On or Off
High, Low or Off
Go Back
Set the operation of the automatic climate
control.
Mode Setting
Climate Con-
Normal, Mild, ECO or Power
On or Off
224
Set the operation of the climate control depend-
ing on passenger.
trol
Occupant Detection
224
—
Go Back
Return to the 1st menu.
– CONTINUED –
Multi-function display (color LCD)
216
Top menu
2nd menu
Description
Set and adjust the brightness of a display.
Page
225
225
225
—
Brightness
Contrast
Set and adjust the contrast of a display.
Set the camera shift link.
Camera Set-
tings
Camera Shift Link
Go Back
On or Off
Return to the 1st menu.
Engine Oil
Set and adjust the oil maintenance notification date.
Set and adjust the oil filter maintenance notification date.
Set and adjust the tire maintenance notification date.
Set and adjust the vehicle maintenance notification date.
226
226
226
226
Oil Filter
Tires
Maintenance Schedule
Maintenance
Turn on or off the self-check screen that is
activated when the ignition switch is turned to the On or Off
“ON” position.
ON/OFF
226
Clear All Settings
Clear all settings for maintenance items.
Return to the 1st menu.
Yes or No
227
—
Go Back
Initialize
Go Back
—
—
Reset all settings to the default settings.
Return to the setting screen.
Yes or No
227
—
*: You can also set this while driving.
Items that can be set while driving:
Menu
Description
Page
Screen Off
Go Back
Turn the screen off.
Return to the settings screen.
Yes or No
223
—
For safety reasons, we recommend stopping the vehicle in a safe location while setting.
Multi-function display (color LCD) 217
4. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
! Date and time settings
You can set the date, time and 12h or 24h
format settings.
! Current date and time setting
For details about clock setting, refer to
“Clock” �P228.
NOTE
You can store a maximum of 5 birth-
days.
! Birthday setting
! Anniversary setting
If a birthday or anniversary is approaching,
a message will be displayed when the
ignition switch is turned to the “ON”
position. This function can be set to on or
off. For details, refer to “Bypass screen
setting” �P223.
1. Select “Birthday” from the 2nd menu in
the setting screen. Refer to “Setting
screen” �P214.
The procedure for setting an anniversary is
the same as “Birthday setting” �P217,
except that in step 1 “Anniversary” is
selected.
2. Select from the list the number that you
want to register.
NOTE
You can store a maximum of 5 anniver-
saries.
! Driver Monitoring System settings
You can set the Driver Monitoring System
settings.
! Repeat facial scan
1. Select “Repeat facial scan” from the
2nd menu in the settings screen. Refer
to “Setting screen” �P214.
3. Enter the date and the text by using the
control switches.
– CONTINUED –
Multi-function display (color LCD)
218
! Register User
1. Adjust the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle so that you are seated in
the correct driving posture.
NOTE
.
Start the user registration after ad-
justing the seat position, outside
mirror angle, and reverse tilt-down
outside mirror angle. If they are
adjusted during user registration, it
may be disrupted. Refer to “Power
seat” �P34 or “Outside mirrors”
�P252.
When user recognition is completed, the
Hello screen appears and the screen then
switches to the basic screen associated
with the user information.
2. Select “Yes” to start the repeat facial
scan. Select “No” to return to the
previous screen.
3. While seated in the driver’s seat, face
straight forward and wait for a few
moments.
.
If the ignition switch is turned to the
“OFF” position before user registra-
tion is complete, the information of
the adjusted seat position, outside
mirror angle, and reverse tilt-down
outside mirror angle will not be
saved.
2. Select “Register User” from the 2nd
menu in the settings screen. Refer to
“Setting screen” �P214.
Multi-function display (color LCD) 219
5. While seated in the driver’s seat, face
straight forward and wait for a few
moments.
3. Select from the list the number that you
want to register.
When the screen changes, the registration
facial scan is completed.
A
Forward direction
Display direction
Face forward.
Do not lower your chin.
Face the display.
B
1
2
3
4. Select “Set” to start the registration
facial scan. Select “Go Back” to return
to the previous screen.
*: Display
– CONTINUED –
Multi-function display (color LCD)
220
.
When “User Recognition” is set to
OFF, user registration cannot be
selected.
NOTE
.
If user registration cannot be per-
formed, turn your face forward as
shown in the illustration, then turn to
the display.
! Delete User
.
.
If “Unable to register” appears, re-
peat the procedure beginning from
step 4.
There are some cases where user
registration cannot be registered
properly. In those cases, refer to
“Driver Monitoring System” �P379.
1. Select “Delete User” from the 2nd
menu in the settings screen. Refer to
“Setting screen” �P214.
NOTE
.
A screen recommending user regis-
tration appears at the following
times.
– When the driver has not com-
pleted user registration
– When there are 4 or fewer regis-
tered users
Operate the control switch and
select “Yes” to display the screen
in step 3. Then follow the registra-
tion procedure to complete user
registration.
An existing user can be overwritten
by selecting a registered number.
When a user is registered by over-
writing, the individual fuel economy
data is reset.
2. Select from the list the number that you
want to register.
6. Enter the text using the control
switches.
7. Set the desired icons using the control
switches.
.
8. Select “Set” to exit the settings screen.
Multi-function display (color LCD) 221
! Delete All Users
! Update User Settings
1. Select “Delete All Users” from the 2nd
menu in the settings screen. Refer to
“Setting screen” �P214.
1. Select “Update User Settings” from the
2nd menu in the settings screen. Refer
to “Setting screen” �P214.
3. Select “Yes” to delete the number.
Select “No” to return to the previous
screen.
2. Select “Yes” to delete all the users.
Select “No” to return to the previous
screen.
2. Select “Set” to re-register the driver
position. Select “Go Back” to return to
the previous screen.
NOTE
.
Start the user registration after ad-
justing the seat position, outside
mirror angle, and reverse tilt-down
outside mirror angle. If they are
adjusted during user registration, it
may be disrupted. Refer to “Power
seat” �P34 or “Outside mirrors”
�P252.
– CONTINUED –
Multi-function display (color LCD)
222
.
If the ignition switch is turned to the
“OFF” position before user registra-
tion is complete, the information of
the adjusted seat position, outside
mirror angle, and reverse tilt-down
outside mirror angle will not be
saved.
! Automatically retract seat on
! User Recognition settings
entry setting
1. Select “User Recognition” from the 2nd
menu in the settings screen. Refer to
“Setting screen” �P214.
1. Select “Automatically retract seat on
entry” from the 2nd menu in the
settings screen. Refer to “Setting
screen” �P214.
! Delete Driver Position
1. Select “Delete Driver Position” from the
2nd menu in the settings screen. Refer
to “Setting screen” �P214.
2. Select “On” or “Off” to turn the User
Recognition settings on or off by using
the control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen.
2. Select “On” or “Off” to turn the auto
entry/exit function on or off by using the
control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen.
2. Select “Yes” to delete the driver posi-
tion. Select “No” to return to the
previous screen.
Multi-function display (color LCD) 223
! Display/Beep settings
NOTE
NOTE
You can set the display settings and
volume settings.
While the screen is off, the screen
switches to the climate control screen
only when the climate control system is
operated.
.
.
.
You can display a maximum of the 3
items.
The same item cannot be selected
for the left, center or right location.
Weather information for 3 hours
later or 6 hours later can be dis-
played.
! Screen OFF setting
1. Select “Screen Off” from the 2nd menu
in setting screen. Refer to “Setting
screen” �P214.
! Favorite setting
1. Select “Favorite” from the 2nd menu in
setting screen. Refer to “Setting
screen” �P214.
! Bypass screen setting
1. Select “Bypass Screen” from the 2nd
menu in the setting screen. Refer to
“Setting screen” �P214.
2. Select “Yes” to turn off the screen.
Select “No” to return to the previous
screen.
2. Set the desired items by using the
control switches. For details about
items, refer to “Favorite screen”
�P211.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
Restoring the screen
When the INFO button is operated after
the ignition switch is turned to the “ON” or
“ACC” position, the screen will be restored.
The screen will be restored with the basic
screen that was displayed when the
screen was turned off.
2. Select “On” or “Off” to turn the display
of items on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
– CONTINUED –
Multi-function display (color LCD)
224
without applying the setting changes.
! Climate Control settings
! Occupant detection settings
You can set the climate control settings.
1. Select “Occupant Detection” from the
2nd menu in the setting screen. Refer
to “Setting screen” �P214.
NOTE
! Mode Setting
Traffic information setting is only dis-
played for the audio unit with SiriusXM
satellite radio.
1. Select “Mode Setting” from the 2nd
menu in the setting screen. Refer to
“Setting screen” �P214.
! Beep setting
1. Select “Beep” from the 2nd menu in the
setting screen. Refer to “Setting
screen” �P214.
2. Select “On” or “Off” to turn the occu-
pant detection on or off by using the
control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
2. Select “Normal”, “Mild”, “Power” or
“ECO” by using the control switches.
For details about Mode Setting, refer to
“Automatic climate control customiza-
tion (for type B and C)” �P266.
2. Set the beep volume by using the
control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
Multi-function display (color LCD) 225
! Camera settings (if equipped)
! Contrast setting
! Camera shift link setting
You can set the front camera display
settings.
1. Select “Contrast” from the 2nd menu in
the setting screen. Refer to “Setting
screen” �P214.
1. Select “Camera Shift Link” from the
2nd menu in the setting screen. Refer
to “Setting screen” �P214.
! Brightness setting
1. Select “Brightness” from the 2nd menu
in the setting screen. Refer to “Setting
screen” �P214.
2. Select the contrast level by using the
control switches.
2. Select “On” or “Off” by using the control
switches.
3. Press the “ /SET” button to confirm
the setting.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
2. Select the brightness level by using the
control switches.
3. Press the “ /SET” button to confirm
the setting.
– CONTINUED –
Multi-function display (color LCD)
226
! Maintenance settings
! On/Off setting
NOTE
You can set maintenance reminders.
.
.
.
The reminder will be displayed by
either date or distance in accor-
dance with the setting.
Even when either “Day” or “Dis-
tance” are displayed as “_ _” a
pop-up screen will appear.
The reminder will be displayed until
either of the following conditions is
satisfied.
1. Select “On/Off” from the 2nd menu on
the setting screen. Refer to “Setting
screen” �P214.
! Engine oil setting
1. Select “Engine Oil” from the 2nd menu
in the setting screen. Refer to “Setting
screen” �P214.
– The period of time passed after
the registered notification date is
15 days or more.
– The total distance driven after the
registered notification distance
is approximately 311 miles (500
km) or more.
2. Select “On” or “Off” to turn the opening
screen on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
! Oil filter setting
The setting procedure is the same as
“Engine oil setting” �P226, but select the
“Oil Filter” item in step 1.
2. Set the date and distance of the
reminder by using the control switches.
3. Select “Set” to exit settings. Select
“Update” to change the notification
distance to the default value. Select
“Go Back” to return to the previous
screen without applying the setting
changes.
! Tires setting
The setting procedure is the same as
“Engine oil setting” �P226, but select the
“Tires” item in step 1.
! Maintenance schedule setting
The setting procedure is the same as
“Engine oil setting” �P226, but select the
“Maintenance Schedule” item in step 1.
Multi-function display (color LCD) 227
! Initialize
& How to get the source code
! Clear setting
using the open source
You can initialize the items that have been
set to your preference.
1. Select “Initialize” from the 2nd menu on
the setting screen. Refer to “Setting
screen” �P214.
1. Select “Clear All Settings” from the 2nd
menu on the setting screen. Refer to
“Setting screen” �P214.
Free/Open Source Software Information
This product contains Free/Open Source
Software (FOSS).
The license information and/or the source
code of such FOSS can be found at the
following URL.
source/ivi/subaru/
2. Select “Yes” or “No” by using the
control switches.
2. Select “Yes” or “No” by using the
control switches.
NOTE
You cannot initialize the items if the
Driver Monitoring System is not oper-
ated.
