Deutsch
EnglishPEUGEOT Connect Radio for your Peugeot 3008 2016-2023
PEUGEOT Connect Radio
– Connecting to the CarPlay® or Android
Auto applications (certain applications stop
displaying when the vehicle is moving).
– Changing the system settings and
configuration.
access the menus, then press the virtual buttons
on the touch screen.
At all times it is possible to display the rolling
menus by pressing the screen briefly with three
fingers.
PEUGEOT Connect
Radio
10
All touch-sensitive areas on the screen are
white.
The system is protected so that it only
operates in the vehicle.
The message Energy economy mode is
displayed when the system is about to go into
standby.
On pages with multiple tabs at the bottom of the
screen, you can switch between pages either
by tapping the tab for the desired page or by
swiping the pages to the left or right with your
finger.
Press in the shaded area to go back up a level
or confirm.
Press the back arrow to go back a level or
confirm.
The system’s Open Source Software
(OSS) source codes are available at the
following addresses:
Multimedia audio system -
Applications - Bluetooth®
telephone
The touch screen is of the "capacitive"
type.
To clean the screen, use a soft, non-abrasive
cloth (e.g. spectacles cloth) with no additional
product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
The functions and settings described
vary according to the vehicle version and
configuration, as well as the country of sale.
First steps
With the engine running, a press mutes
the sound.
With the ignition off, a press turns the system on.
Increase or decrease the volume using
the wheel or the "plus" or "minus" buttons
(depending on the equipment).
Use the buttons on either side of or below the
touch screen to access the menus, then press
the virtual buttons on the touch screen.
Depending on the model, use the "Source" and
"Menu" buttons on the left of the touch screen to
For safety reasons and because they
require sustained attention by the driver,
the following operations must be carried out
with the vehicle stationary and the ignition
on:
– Pairing the smartphone with the system via
Bluetooth.
– Using the smartphone.
Certain information is displayed permanently in
the upper bar of the touch screen:
– Air conditioning status information (depending
on version), and direct access to the
corresponding menu.
– Radio Media and Telephone menu status
information.
– Privacy status information.
223
PEUGEOT Connect Radio
– Access to the touch screen and digital
instrument panel settings.
Audio source selection (depending on
equipment):
– FM/DAB/AM radio stations (depending on
equipment).
enter standby mode (with the screen and
sound off) for 5 minutes or more.
The system will resume normal operation
when the temperature in the passenger
compartment has dropped.
Increase volume.
Decrease volume.
Mute/restore sound by simultaneously
pressing the increase and decrease
– Telephone connected via Bluetooth and
Bluetooth multimedia broadcast (streaming).
– USB Memory stick.
– Media player connected via the auxiliary
socket (depending on equipment).
volume buttons.
Steering mounted controls
Steering mounted controls -
Type 2
Steering mounted controls -
Type 1
Voice commands:
This control is located on the steering
wheel or at the end of the lighting control stalk
(depending on equipment).
Short press, smartphone voice commands via
the system.
Radio:
Select the previous/next preset radio
station.
Select the previous/next item in a menu or a list.
Media:
Select the previous/next track.
Select the previous/next item in a menu or a list.
Radio:
Short press: display the list of radio
stations.
Increase volume.
Decrease volume.
Mute by pressing the volume increase
and decrease buttons simultaneously
(depending on equipment).
Restore the sound by pressing one of the two
volume buttons.
In the "Settings" menu, it is possible to
create a profile for an individual or for a
group of people with shared interests, and
configure a wide range of settings (radio
presets, audio settings, ambiences, etc.).
Settings are applied automatically.
Long press: update the list.
Media:
Short press: display the list of folders.
Long press: display the available sorting options.
Change audio source (radio; USB; AUX if
equipment connected; CD; streaming).
Confirm a selection.
Media (short press): change the
multimedia source.
Telephone (short press): start telephone
call.
In very hot conditions, the volume may
be limited to protect the system. It may
Call in progress (short press): access
telephone menu.
224
PEUGEOT Connect Radio
Telephone (long press): reject an incoming call,
end call; when no call is in progress, access
telephone menu.
Radio Media
Settings
10
Radio (rotate): automatic search for the
previous/next station.
Media (rotate): previous/next track, move in a
list.
Short press: confirm a selection; if nothing
selected, access to presets.
Radio: display the list of stations.
Media: display the list of tracks.
Radio (press and hold): update the list of
stations received.
Select an audio source or radio station.
Configure a personal profile and/or
configure the sound (balance, ambience,
etc.) and the display (language, units, date, time,
etc.).
Menus
Telephone
Applications
Driving
Connect a mobile phone via Bluetooth®.
Run certain applications from a
smartphone connected via CarPlay® or Android
Auto.
Access configurable equipment.
Activate, deactivate or configure certain
vehicle functions.
225
PEUGEOT Connect Radio
Press this button to search and select a
recipient.
Navigation
Applications
Select the "Quick messages” tab.
Viewing photos
Insert a USB memory stick in the USB port.
Press this button to select the display
settings for messages.
Press this button to write a new message.
To protect the system, do not use a USB
hub.
The system can read folders and image files in
the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.
Press Applications to display the main
page.
Press the bin alongside the selected
message to delete it.
Press this button alongside the selected
message to display the secondary page.
Press this button to edit and modify the
existing text.
Configure the navigation and select your
destination via CarPlay® or Android Auto.
Press "Photos".
Select a folder.
Press this button to write a new message.
Air conditioning
Select an image to view.
Press the bin to delete the message.
Press this button to display the details of
the photo.
Press the back arrow to go back a level.
Radio
18,5
21,5
Selecting a station
Managing messages
Press Radio Media to display the main
page.
Press Applications to display the main
Press one of the buttons to perform an
automatic search for radio stations.
Or
page.
Press "SMS".
Manage various temperature and air flow
settings.
Move the slider to manually search for
frequencies up or down.
Or
Select the "SMS” tab.
Press this button to select the display
settings for messages.
Press the frequency.
226
PEUGEOT Connect Radio
Enter the FM and AM waveband values
using the virtual keypad.
Press "OK" to confirm.
Or
Press the "OPTIONS" button to access the
secondary page.
10
Select a radio station or frequency.
Press "Preset".
Activate/deactivate "News".
Make a long press on one of the buttons
to preset the station.
Press in the shaded area to confirm.
Radio reception may be affected by the
use of electrical equipment not approved
by the Brand, such as a USB charger
connected to the 12 V socket.
The exterior environment (hills, buildings,
tunnels, basement car parks, etc.) may
block reception, including in RDS mode.
This phenomenon is perfectly normal in the
context of radio wave transmission, and
in no way indicative of an audio system
malfunction.
Activating/Deactivating RDS
Playing TA messages
RDS, if activated, allows you to continue
listening to the same station by automatically
retuning to alternative frequencies.
Press Radio Media to display the main
page.
The TA (Traffic Announcement) function gives
priority to TA alert messages. To operate, this
function needs good reception of a radio station
that transmits this type of message. While traffic
information is being broadcast, the current
media is automatically interrupted so that the
TA message can be heard. Normal play of the
previously playing media resumes at the end of
the message.
Press the "OPTIONS" button to access the
secondary page.
Activate/deactivate "RDS".
Press in the shaded area to confirm.
Changing the waveband
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
Press Radio Media to display the main
page.
RDS station tracking may not be
available nationwide, as many radio
stations do not cover 100 % of the country.
This explains the loss of reception of the
station during a journey.
Press the "OPTIONS" button to access the
secondary page.
Activate/deactivate "TA".
Press "Band" to change waveband.
Press in the shaded area to confirm.
Press in the shaded area to confirm.
Displaying text information
Audio settings
The "Radio Text" function displays information
transmitted by the radio station relating to the
station or the currently playing song.
Press Radio Media to display the main
page.
Presetting a station
Press Radio Media to display the main
page.
Select a radio station or frequency.
Make a short press on the star outline. If
the star is solid, the radio station is
already preset.
Press the "OPTIONS" button to access the
secondary page.
Press "Audio settings".
227
PEUGEOT Connect Radio
Select the "Tone", "Balance", "Sound",
"Voice" or "Ringtones" tab to configure
the sound settings.
Press in the shaded area to confirm.
DAB (Digital Audio
Broadcasting) radio
If "FM-DAB Follow-up" is activated, there
may be a time offset of a few seconds
when the system switches to "FM" analogue
radio, and in some cases a change in volume.
When the digital signal quality is restored, the
system automatically changes back to "DAB".
Press the back arrow to confirm.
Terrestrial Digital Radio
Digital radio provides higher quality sound.
The various "multiplexes/ensembles" offer a
choice of radio stations organised in alphabetical
order.
In the "Tone" tab, the Ambience, Bass,
Medium and Treble sound settings are
different and independent for each audio
source.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
In the "Balance” tab, the All passengers,
Driver and Front only settings are common
to all sources.
In the "Sound” tab, activate or deactivate
"Volume linked to speed", "Auxiliary input"
and "Touch tones".
If the "DAB" station being listened to is
not available on "FM", or if "FM-DAB
Follow-up" is not activated, the sound will cut
out while the digital signal is too weak.
Press "Band" to select "DAB band".
Press in the shaded area to confirm.
Media
The balance/distribution (or spatialisation
with the Arkamys© system) uses audio
processing to adjust the sound quality
according to the number of passengers in the
vehicle.
FM-DAB Follow-up
USB port
"DAB" does not cover 100 % of the country.
When the digital radio signal is poor, the
"FM-DAB Follow-up" enables you to continue
listening to the same station by automatically
switching to the corresponding "FM" analogue
station (if there is one).
Insert the USB memory stick into the USB
port or connect the USB device to the
USB port using a suitable cable (not supplied).
Onboard audio: Arkamys Sound Staging©
optimises the sound distribution inside
the passenger compartment.
To protect the system, do not use a USB
hub.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
The system builds playlists (in temporary
memory); this operation can take from a
few seconds to several minutes at the first
connection.
Activate/deactivate "FM-DAB Follow-up".
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
228
PEUGEOT Connect Radio
Playlists are updated whenever the ignition
is switched off or a USB memory stick is
connected. The audio system memorises these
lists, which will subsequently load faster if they
have not been changed.
If play does not start automatically, it may be
necessary to start the audio playback from the
smartphone.
Control is from the portable device or by using
the system's touch buttons.
Information and advice
10
The system supports USB mass storage
devices, BlackBerry® devices or Apple® players
via the USB ports. The adapter cable is not
supplied.
Devices are managed using the audio system
controls.
Other devices, not recognised on connection,
must be connected to the auxiliary socket using
a jack cable (not supplied) or via Bluetooth
streaming, if compatible.
Once connected in Streaming mode, the
smartphone is considered to be a media
source.
Auxiliary (AUX) jack socket
Depending on equipment
Connect a portable device (MP3 player,
etc.) to the auxiliary jack socket using an
audio cable (not supplied).
This source is only available if "Auxiliary input"
has been selected in the audio settings.
First adjust the volume on the portable device
(to a high level). Then adjust the volume of the
audio system.
Connecting Apple® players
Connect the Apple® player to the USB socket
using a suitable cable (not supplied).
Play starts automatically.
To protect the system, do not use a USB
hub.
Control is via the audio system.
The audio system will only play audio files with
".wav", ".wma", ".aac", ".ogg" and ".mp3" file
extensions, at bit rates between 32 Kbps and
320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other file types (".mp4", etc.) can be read.
All ".wma" files must be standard WMA 9 files.
The supported sampling rates are 11, 22, 44 and
48 KHz.
To avoid reading and display problems, we
recommend choosing file names less than 20
characters long that do not contain any special
characters (e.g. “ ? . ; ù).
Use only USB memory sticks in FAT32 format
(File Allocation Table).
The classifications available are those of
the portable device connected (artists/
albums/genres/playlists/audio books/
podcasts). It is also possible to use a
classification structured in the form of a
library.
The default classification used is by artist. To
modify the classification used, return to the
first level of the menu then select the desired
classification (playlists for example) and
confirm to go down through the menu to the
desired track.
Controls are managed via the portable device.
Selecting the source
Press Radio Media to display the main
page.
Press the "SOURCES" button.
Select the source.
Bluetooth Streaming®
Streaming allows you to listen to the audio feed
from your smartphone.
The Bluetooth profile must be activated.
First adjust the volume on the portable device
(to a high level). Then adjust the volume of the
system.
The version of software in the audio system may
not be compatible with the generation of the
Apple® player.
We recommend using the original USB
cable for the portable device.
229
PEUGEOT Connect Radio
On connecting the USB cable, the
CarPlay® function deactivates the
system's Bluetooth® mode.
The "CarPlay" function requires the use of
a compatible smartphone and compatible
applications.
Android Auto smartphone
connection
Telephone
USB sockets
Depending on country.
Depending on equipment, for more information
on the USB sockets compatible with CarPlay® or
Android Auto applications, refer to the "Ease of
use and comfort" section.
On the smartphone, download the
Android Auto application.
The "Android Auto" function requires the
use of a compatible smartphone and
applications.
Connect the USB cable. The smartphone
charges when connected by the USB
cable.
From the system, press Telephone to
display the CarPlay® interface.
Or
If the smartphone has already connected
by Bluetooth®.
Connect the USB cable. The smartphone
charges when connected by the USB
cable.
For the list of compatible smartphones,
visit the Manufacturer's website in your
country.
Telephone not connected by
Bluetooth®
Synchronising a smartphone enables
users to display applications that support
the smartphone’s CarPlay® or Android Auto
technology on the vehicle’s screen. For
CarPlay® technology, the CarPlay® function
must first be activated on the smartphone.
Unlock the smartphone for the communication
process between the smartphone and the
system to work.
As principles and standards are constantly
changing, we recommend keeping the
smartphone's operating system up-to-
date, together with the date and time on
the smartphone and the system.
Connect a USB cable. The smartphone
charges when connected by a USB cable.
From the system, press "Telephone" to
display the main page.
Press "Android Auto" to start the
application in the system.
From the system, press "Telephone" to
display the main page.
Press the "PHONE" button to go to the
secondary page.
Depending on the smartphone, it may be
necessary to activate the "Android Auto"
function.
During the procedure, several screen
pages relating to certain features are
displayed.
Accept to start and complete the connection.
When connecting a smartphone to the
system, we recommend enabling
Bluetooth® on the smartphone.
Press "CarPlay" to display the CarPlay®
interface.
When the USB cable is disconnected
and the ignition is switched off then back
on, the system will not automatically switch to
Radio Media mode; the source must be
changed manually.
CarPlay® smartphone
connection
Depending on country.
The CarPlay® navigation can be accessed Telephone connected by Bluetooth®
at any time by pressing the system's
From the system, press "Telephone" to
Navigation button.
display the main page.
230
PEUGEOT Connect Radio
Press the "PHONE" button to display the
secondary page.
If the pairing procedure fails, we
recommend deactivating and then
reactivating the Bluetooth function on the
telephone.
Depending on the type of telephone, you may by
prompted to accept the transfer of contacts and
messages.
10
Press "Android Auto" to start the
application in the system.
Access to the different audio sources remains
available in the margin of the Android Auto
display, using the touch buttons located in the
upper bar.
The ability of the system to connect just
one profile depends on the telephone.
All three profiles may connect by default.
Procedure from the telephone
Select the name of the system in the list
of detected devices.
In the system, accept the connection request
from the telephone.
The profiles compatible with the system
are: HFP, OPP, PBAP, A2DP, AVRCP,
MAP and PAN.
Access to the menus for the system is possible
at any time using the dedicated buttons.
There may be a pause before
applications become available,
depending on the quality of the network.
Visit the Brand's website for more information
(compatibility, additional help, etc.).
Procedure from the system
Press Telephone to display the main
page.
Press "Bluetooth search".
The list of detected telephones is
displayed.
Automatic reconnection
Pairing a Bluetooth®
telephone
On returning to the vehicle, if the last telephone
connected is present again, it is automatically
recognised and within about 30 seconds
after switching on the ignition, the pairing is
established automatically (Bluetooth activated).
To modify the connection profile:
Press Telephone to display the main
page.
Select the name of the chosen telephone
in the list.
The services available depend on the
network, the SIM card and the
compatibility of the Bluetooth devices used.
Consult the telephone user guide and the
service provider to check which services are
available.
Connection sharing
The system offers to connect the telephone with
3 profiles:
– "Telephone" (hands-free kit, telephone only),
– “Streaming" (streaming: wireless playing of
audio files on the telephone),
Press the "PHONE" button to access the
secondary page.
The Bluetooth function must be activated
and the telephone configured as "Visible
to all” (in the telphone settings).
Press "Bluetooth connection" to
display the list of paired devices.
Press the "Details" button for a paired
device.
– "Mobile internet data".
Select one or more profiles.
To complete the pairing, whichever procedure is
used (from the telephone or from the system),
ensure that the code is the same in the system
and in the telephone.
Select one or more profiles.
Press "OK" to confirm.
231
PEUGEOT Connect Radio
Press "OK" to confirm.
on the steering mounted PHONE button
Press "Call".
to reject the call.
Or
Managing paired telephones
Calling a recently used
number
Press "End call".
This function lets you connect or disconnect a
device or delete a pairing.
Press Telephone to display the main
page.
Press the "PHONE" button to access the
secondary page.
Press "Bluetooth connection" to
display the list of paired devices.
Press on the name of the telephone
selected in the list to disconnect it.
Press again to connect it.
Press Telephone to display the main
Making a call
page.
Or
Using the telephone is not recommended
while driving.
Parking the vehicle.
Make the call using the steering mounted
controls.
Press and hold
the steering mounted button.
Press "Recent calls".
Select the desired contact from the displayed list.
Calling a new number
It is always possible to make a call
directly from the telephone; as a safety
measure, first park the vehicle.
Press Telephone to display the main
page.
Enter the phone number using the digital
keypad.
Deleting a telephone
Press the basket at the top right of the
screen to display a basket alongside the
telephone chosen.
Press "Call" to start the call.
Setting the ringtone
Press the basket alongside the telephone
chosen to delete it.
Press Telephone to display the main
page.
Calling a contact
Press the "OPTIONS" button to access the
secondary page.
Receiving a call
Press Telephone to display the main
page.
An incoming call is announced by a ring and a
superimposed display in the screen.
Make a short press on the steering
mounted PHONE button to accept an
incoming call.
Press "Ring volume" to display the
volume bar.
Press the arrows or move the slider to set
the ring volume.
Or press and hold
the steering mounted PHONE button.
And
Press "Contacts".
Select the desired contact from the displayed list.
Make a long press
232
PEUGEOT Connect Radio
Press Settings to display the main page.
Modifying system settings
Settings
10
Press Settings to display the main page.
Press "Configuration" to access the
secondary page.
Press "Screen configuration".
Configuring profiles
Press "Configuration" to access the
secondary page.
Press Settings to display the main page.
Press "System configuration".
Press "Profiles".
Press "Brightness".
Move the slider to adjust the brightness of
the screen and/or the instrument panel
(depending on version).
Press the back arrow to confirm.
Press the "Units" tab to change the units of
distance, fuel consumption and temperature.
Press the "Factory settings" tab to restore the
initial settings.
Select "Profile 1", "Profile 2", "Profile 3” or
"Common profile".
Press this button to enter a name for the
profile using the virtual keypad.
Press "OK" to save.
Returning the system to factory settings
activates the English language by default
(depending on version).
Press "Animation".
Activate or deactivate: “Automatic
scrolling”.
Press the back arrow to confirm.
Select "Animated transitions".
Press the "System info" tab to display the
versions of the various modules installed in the
system.
Press this button to activate the profile.
Press the back arrow again to confirm.
Press the back arrow to confirm.
Press the "Privacy" tab,
or
Press this button to reset the selected
profile.
Selecting the language
Press Settings to display the main page.
Press Settings to display the main page.
Press "Privacy" to activate or deactivate
the private data mode.
Activate or deactivate:
Adjusting the brightness
Press "Configuration" to access the
secondary page.
Select "Language" to change the
language.
Press Settings to display the main page.
Press Brightness.
– "No sharing (data, vehicle position)".
– "Only data sharing”
– "Data and vehicle position sharing"
Press the back arrow to confirm.
Press the back arrow to confirm.
Move the slider to adjust the brightness of
the screen and/or the instrument panel
(depending on version).
Setting the time
Press in the shaded area to confirm.
Press Settings to display the main page.
233
PEUGEOT Connect Radio
Press "Configuration" to access the
Press this button to set the date.
The environment (hills, buildings, tunnels,
basement car parks, etc.) is blocking reception,
including in RDS mode.
This is a perfectly normal phenomenon, and is
not indicative of an audio system malfunction.
The aerial is missing or has been damaged
(for example while entering a car wash or
underground car park).
secondary page.
Press "Date and time".
Press the back arrow to save the date.
Select the display format for the date.
Press the back arrow again to confirm.
Select "Time".
Press this button to set the time using the
virtual keypad.
Press "OK" to save the time.
► Have the aerial checked by a dealer.
I cannot find some radio stations in the list of
received stations.
Time and date setting is only available if
"GPS Synchronisation:" is deactivated.
Press this button to set the time zone.
Select the display format for the time
(12h/24h).
Activate or deactivate summer time (+1
hour).
Activate or deactivate GPS
synchronisation (UTC).
Press the back arrow to save the settings.
The name of the radio station changes.
The station is no longer received or its name has
changed in the list.
► Press the round arrow on the "List" tab on the
"Radio" page.
Some radio stations send other information
in place of their name (the title of the song for
example).
Frequently asked
questions
The following information groups together the
answers to the most frequently asked questions
concerning the system.
The system interprets these details as the station
name.
► Press the round arrow on the "List" tab on the
"Radio" page.
The system may not automatically
manage the change between winter and
summer time (depending on the country of
sale).
Radio
The reception quality of the tuned radio
station gradually deteriorates or the station
presets are not working (no sound, 87.5 MHz
is displayed, etc.).
Media
The vehicle is too far from the selected station’s
transmitter, or no transmitter is present in the
geographical area.
► Activate the "RDS" function in the upper bar
to enable the system to check whether there is
a more powerful transmitter in the geographical
area.
Setting the date
Playback of my USB memory stick starts only
after a very long wait (around 2 to 3 minutes).
Some files supplied with the memory stick may
greatly slow down access to reading the memory
stick (multiplication by 10 of the cataloguing
time).
Press Settings to display the main page.
Press "Configuration" to access the
secondary page.
Press "Date and time".
Select "Date".
234
