Deutsch
EnglishSafety -> ISOFIX child seats for your Peugeot 2008 2019-2025
Safety
– Two rings A, located between the vehicle seat
backrest and cushion.
Groups 2 and 3: from 15 to 36 kg
5
L6
"GRACO Booster"
* Depending on country of sale.
Rear seats
The child is restrained by the seat belt.
Only suitable for installation on the front
passenger seat or on the rear side seats.
This system prevents the child seat from tipping
forwards in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in the
vehicle.
To secure the child seat to the TOP TETHER:
► Remove and stow the head restraint before
installing the child seat on this seat (refit it once
the child seat has been removed).
The 2 latches on ISOFIX child seats are
secured to them.
– One ring B, located behind the seat, called the
TOP TETHER, for attaching seats fitted with an
upper strap.
"ISOFIX" mountings
The seats shown below are fitted with ISOFIX
compliant mountings:
► Pass the strap of the child seat behind the
seat backrest, centring it between the openings
for the head restraint rods.
► Secure the upper strap hook to ring B.
► Tighten the upper strap.
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the centre
rear seat belt towards the middle of the
vehicle, so as to avoid the seat interfering
with the operation of the seat belt.
Front seat
* Depending on version.
The mountings comprise three rings for each
seat, indicated by a marking:
79
Safety
An incorrectly installed child seat in a
vehicle compromises the child's safety in
the event of an accident.
"RÖMER Baby-Safe and its ISOFIX base"
"RÖMER Duo Plus ISOFIX"
(size category: B1)
(size category: E)
Strictly observe the fitting instructions
provided in the user guide supplied with the
child seat.
Group 0+: from birth to 13 kg
Group 1: from 9 to 18 kg
For information about the options for
fitting ISOFIX child seats in your vehicle,
refer to the summary table.
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
Suitable for forward-facing installation only.
Attached to rings A and ring B, referred to as
TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining,
lying down.
This child seat can also be used in seat
positions not equipped with ISOFIX
mountings. In this case, it must be secured to
the vehicle's seat by the three-point seat belt.
Adjust the front seat of the vehicle so that the
child's feet do not touch the backrest.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle seat using the
three-point seat belt.
Recommended ISOFIX child
seats
Also consult the user guide from the child
seat’s manufacturer to find out how to
install and remove the seat.
i-Size child seats
i-Size child seats have two latches that are anchored to the two rings A.
These i-Size child seats also have:
– either an upper strap that is attached to ring B.
– or a support leg that rests on the vehicle floor, compatible with the approved i-Size seat position.
Their role is to prevent the child seat from tipping forward in the event of a collision.
For more information on the ISOFIX mountings, refer to the corresponding section.
80
