Deutsch
EnglishPEUGEOT Connect Radio -> Media for your Peugeot 2008 2019-2025
PEUGEOT Connect Radio
Select the "Tone", "Balance", "Sound",
"Voice" or "Ringtones" tab to configure
the sound settings.
Press in the shaded area to confirm.
DAB (Digital Audio
Broadcasting) radio
If "FM-DAB Follow-up" is activated, there
may be a time offset of a few seconds
when the system switches to "FM" analogue
radio, and in some cases a change in volume.
When the digital signal quality is restored, the
system automatically changes back to "DAB".
Press the back arrow to confirm.
Terrestrial Digital Radio
Digital radio provides higher quality sound.
The various "multiplexes/ensembles" offer a
choice of radio stations organised in alphabetical
order.
In the "Tone" tab, the Ambience, Bass,
Medium and Treble sound settings are
different and independent for each audio
source.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
In the "Balance” tab, the All passengers,
Driver and Front only settings are common
to all sources.
In the "Sound” tab, activate or deactivate
"Volume linked to speed", "Auxiliary input"
and "Touch tones".
If the "DAB" station being listened to is
not available on "FM", or if "FM-DAB
Follow-up" is not activated, the sound will cut
out while the digital signal is too weak.
Press "Band" to select "DAB band".
Press in the shaded area to confirm.
Media
The balance/distribution (or spatialisation
with the Arkamys© system) uses audio
processing to adjust the sound quality
according to the number of passengers in the
vehicle.
FM-DAB Follow-up
USB port
"DAB" does not cover 100 % of the country.
When the digital radio signal is poor, the
"FM-DAB Follow-up" enables you to continue
listening to the same station by automatically
switching to the corresponding "FM" analogue
station (if there is one).
Insert the USB memory stick into the USB
port or connect the USB device to the
USB port using a suitable cable (not supplied).
Onboard audio: Arkamys Sound Staging©
optimises the sound distribution inside
the passenger compartment.
To protect the system, do not use a USB
hub.
Press Radio Media to display the main
page.
Press the "OPTIONS" button to access the
secondary page.
The system builds playlists (in temporary
memory); this operation can take from a
few seconds to several minutes at the first
connection.
Activate/deactivate "FM-DAB Follow-up".
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
190
PEUGEOT Connect Radio
Playlists are updated whenever the ignition
is switched off or a USB memory stick is
connected. The audio system memorises these
lists, which will subsequently load faster if they
have not been changed.
If play does not start automatically, it may be
necessary to start the audio playback from the
smartphone.
Control is from the portable device or by using
the system's touch buttons.
Information and advice
10
The system supports USB mass storage
devices, BlackBerry® devices or Apple® players
via the USB ports. The adapter cable is not
supplied.
Devices are managed using the audio system
controls.
Other devices, not recognised on connection,
must be connected to the auxiliary socket using
a jack cable (not supplied) or via Bluetooth
streaming, if compatible.
Once connected in Streaming mode, the
smartphone is considered to be a media
source.
Auxiliary (AUX) jack socket
Depending on equipment
Connect a portable device (MP3 player,
etc.) to the auxiliary jack socket using an
audio cable (not supplied).
This source is only available if "Auxiliary input"
has been selected in the audio settings.
First adjust the volume on the portable device
(to a high level). Then adjust the volume of the
audio system.
Connecting Apple® players
Connect the Apple® player to the USB socket
using a suitable cable (not supplied).
Play starts automatically.
To protect the system, do not use a USB
hub.
Control is via the audio system.
The audio system will only play audio files with
".wav", ".wma", ".aac", ".ogg" and ".mp3" file
extensions, at bit rates between 32 Kbps and
320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other file types (".mp4", etc.) can be read.
All ".wma" files must be standard WMA 9 files.
The supported sampling rates are 11, 22, 44 and
48 KHz.
To avoid reading and display problems, we
recommend choosing file names less than 20
characters long that do not contain any special
characters (e.g. “ ? . ; ù).
Use only USB memory sticks in FAT32 format
(File Allocation Table).
The classifications available are those of
the portable device connected (artists/
albums/genres/playlists/audio books/
podcasts). It is also possible to use a
classification structured in the form of a
library.
The default classification used is by artist. To
modify the classification used, return to the
first level of the menu then select the desired
classification (playlists for example) and
confirm to go down through the menu to the
desired track.
Controls are managed via the portable device.
Selecting the source
Press Radio Media to display the main
page.
Press the "SOURCES" button.
Select the source.
Bluetooth Streaming®
Streaming allows you to listen to the audio feed
from your smartphone.
The Bluetooth profile must be activated.
First adjust the volume on the portable device
(to a high level). Then adjust the volume of the
system.
The version of software in the audio system may
not be compatible with the generation of the
Apple® player.
We recommend using the original USB
cable for the portable device.
191
