Deutsch
EnglishInstruments -> Lighting dimmer for your Peugeot 2008 2019-2025
Instruments
The devices in question are the heating and air
conditioning systems.
This equipment can be used:
– If the vehicle is not plugged in, when the
READY lamp is lit.
– If the vehicle is plugged in, when the ignition is
switched on ("Lounge" mode).
Selecting ECO mode limits the performance of
some of this equipment. The needle or cursor on
the thermal comfort consumption indicator then
moves into the "ECO" zone.
the road speed must be displayed in the local
country’s official unit (km/h or mph).
The unit is changed via the screen
configuration menu, with the vehicle
stationary.
Manual test
1
This function allows you to check certain
indicators and display the alerts log.
It can be accessed via the "Check" button
in the Driving/Vehicle touch screen
menu.
The following information is displayed on the
instrument panel:
– Engine oil level.
– Next service due.
– Tyre pressures.
Lighting dimmer
This system allows the brightness of the
instruments and controls to be adjusted manually
to suit the ambient light level.
– Driving range associated with the AdBlue® and
the SCR system (BlueHDi Diesel).
– Current alerts.
To quickly heat or cool the passenger
compartment, feel free to temporarily
select the maximum heating or cooling
setting.
When the heating is on maximum, the gauge
on the thermal comfort consumption indicator
is in the MAX zone. When the air conditioning
is on maximum, it stays in the ECO zone.
Excessive use of thermal comfort equipment,
particularly at low speed, can significantly
decrease the vehicle's range.
Remember to optimise equipment settings
upon achieving the desired level of comfort,
and adjust them if necessary whenever you
start the vehicle.
After an extended period without using the
heating, you may notice a slight odour during
the first few minutes of use.
With PEUGEOT Connect
Radio
► Press this button to select the
Settings menu.
This information is also displayed
automatically every time the ignition is
switched on.
► Select "Brightness".
► Adjust the brightness by pressing the
arrows or moving the slider.
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
The settings are applied immediately.
► Press outside the settings window to exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
► Select "Dark".
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
When travelling abroad, you may have to
change the distance units (km or miles):
23
Instruments
Pressing the end of the wiper control stalk
displays the trip computer data.
With digital instrument panel
Trip computer data is permanently displayed
when the "Personal" display mode is selected.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
Display of the various tabs
With PEUGEOT Connect
Nav
With the lamps switched on:
► Press this button to select the
Settings menu.
Trip reset
► When the desired trip is displayed,
press the button on the end of the wiper
control stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
in the same way.
► Select "OPTIONS".
► Select "Screen configuration".
Definitions
► Select the "Brightness” tab.
► Adjust the instrument panel and
screen brightness by using the arrows or
moving the slider.
Range
(miles or km)
Distance that can still be travelled with the
fuel remaining in the tank (based on the
average fuel consumption over the last few miles
(kilometres) travelled).
This value may vary following a change in driving
style or terrain, leading to a significant change in
current fuel consumption.
When the range falls below 19 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the range
is recalculated and is displayed if it exceeds 62
miles (100 km).
► Press this button to save and exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
► Select "Turn off screen".
► Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
– Current information:
• Driving range (Petrol or Diesel).
• Current fuel consumption.
• Stop & Start time counter (Petrol or Diesel).
– Trips "1" then "2":
• Average speed.
• Average fuel consumption.
• Distance travelled.
Dashes appearing permanently in place of
numbers while driving indicates a malfunction.
Consult a PEUGEOT dealer or a qualified
workshop.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
Current consumption
(mpg or l/100 km or km/l)
(miles/kWh or kWh/100 km or km/kWh) (Electric)
Data displayed on the
instrument panel
With instrument panels with dials
24
