Deutsch
EnglishEase of use and comfort -> Mirrors for your Peugeot 2008 2019-2025
Ease of use and comfort
After one hour, the function is deactivated; the
indicator lamp goes off.
consumption in turn decreases energy
consumption.
► Adjust the height and reach to suit your
driving position.
► Push the control to lock the steering wheel.
Heated seats
Prolonged use of heated seats is not
recommended for people with sensitive
skin.
For safety reasons, these adjustments
must only be carried out with the vehicle
stationary.
There is a risk of burns for people whose
perception of heat is impaired (e.g. illness,
taking medication).
To keep the heated pad intact and to prevent
a short circuit:
Mirrors
Door mirrors
– Do not place heavy or sharp objects on the
seat.
As a safety measure, the mirrors should
be adjusted to reduce the "blind spots".
The objects that you see in the mirrors are
in fact closer than they appear. Take this
into account in order to correctly judge the
distance of vehicles approaching from behind.
The function is active only with the engine
running and when the outside temperature is
below 20°C.
► Press the button corresponding to the seat.
► Each press changes the heating level; the
corresponding number of indicator lamps come
on.
► To switch off the heating, press the button
until all of the indicator lamps are off.
The system status is memorised when the
ignition is switched off.
– Do not kneel or stand on the seat.
– Do not spill liquids onto the seat.
– Never use the heating function if the seat
is damp.
Steering wheel
adjustment
Do not use the function when the seat
is not occupied.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function off; reducing electrical
► When stationary, pull the control to release
the steering wheel.
42
Ease of use and comfort
nuisance to the driver caused by the sun,
Adjustment
3
► From the inside, with the
ignition on, place control A in the
central position.
headlamps of other vehicles, etc.
Manual model
Day/night position
► Pull control A backwards.
► Lock the vehicle from the outside.
If the mirrors are folded using control A,
they will not unfold when the vehicle is
unlocked.
Electric unfolding
► Pull the lever to change to the anti-dazzle
"night" position.
► Push the lever to change to the normal "day"
position.
► From outside: unlock the vehicle.
► From inside: with the ignition on, place
control A in the central position and then pull it
rearwards.
► Move control A to the right or to the left to
select the corresponding mirror.
► Move control B in any of the four directions
to adjust.
Adjustment
► Adjust the mirror to the normal "day" position.
The automatic door mirror folding/
unfolding function is configured via the
Driving / Vehicle touch screen menu.
Automatic "electrochrome" models
► Return control A to its central position.
Demisting/De-icing
Manual folding
The demisting/de-icing of the door mirrors
works with the demisting/de-icing of the
rear screen.
For more information on Rear screen
demisting/de-icing, refer to the corresponding
section.
The mirrors can be folded manually (parking
obstruction, narrow garage, etc.).
► Turn the mirror towards the vehicle.
Electric folding
Depending on equipment, the door mirrors can
be folded electrically.
Interior rear view mirror
Equipped with an anti-dazzle system, which
darkens the mirror glass and reduces the
43
Ease of use and comfort
Never drive with passengers seated at
the rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
Rear head restraints
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
The electrochrome system uses a sensor that
detects the level of exterior brightness and that
coming from the rear of the vehicle, in order to
automatically and gradually switch between day
and night usage.
Folding the backrests
Manoeuvring the backrests should only
be done when the vehicle is stationary.
To ensure optimum visibility while
manoeuvring, the mirror automatically
brightens when reverse gear is engaged.
The system is deactivated if the load in the
boot exceeds the height of the load space
cover or if the load space cover has items
placed on it.
They have two positions:
– A high position, for when the seat is in use:
► Pull the head restraint fully up.
– A low position, for stowing, when the seat is
not in use:
► Press the lug A to release the head
restraint and push it down.
First steps:
► Lower the head restraints.
► If necessary, move the front seats forward.
► Check that no person or object might interfere
with the folding of the backrests (e.g. clothing,
luggage).
► Check that the seat belts are free, not
engaged in the buckles. Release them so that
the backrest can be moved.
The rear head restraints can be removed.
Removing a head restraint
Rear bench seat
Bench seat with fixed cushions and split folding
► Release the backrest using control 1.
► Tilt the backrest slightly forwards.
► Pull the head restraint fully up.
► Press the lug A to release the head restraint
and remove it completely.
backrests (2/3-1/3) to adapt the boot load space.
Refitting a head restraint
► Insert the head restraint rods into the guides
in the corresponding backrest.
► Push the head restraint fully down.
► Press the lug A to release the head restraint
and push it down.
44
