Deutsch
EnglishEase of use and comfort -> Interior fittings for your Peugeot 2008 2019-2025
Ease of use and comfort
electrical consumption in turn decreases
energy consumption.
The temperature pre-conditioning sequence
begins approximately 45 minutes before the
programmed time when the vehicle is connected
(20 minutes when it is not connected) and is
maintained for 10 minutes after.
Interior fittings
Temperature pre-
conditioning (Electric)
This function allows you to programme the
temperature in the passenger compartment to
reach a pre-defined, non-modifiable temperature
(approx. 21°C) before you enter the vehicle, on
the days and at the times of your choice.
This function is available when the vehicle is
connected or not connected.
You can set multiple programmes.
Each one is saved in the system.
To optimise the driving range, we recommend
starting a programme while the vehicle is
connected.
The fan noise that occurs during
temperature pre-conditioning is perfectly
normal.
1. Grab handle
2. Sun visor
3. Glove box
4. Door pockets
Programming
With PEUGEOT Connect Radio or
PEUGEOT Connect Nav system
Operating conditions
– The function is only activated when the
ignition is switched off and the vehicle
locked.
– When the vehicle is not connected, the
function is only activated if the battery charge
level is greater than 50%.
– When the vehicle is not connected and a
recurring programme is active (e.g. from Monday
to Friday), if two temperature pre-conditioning
sequences are run without the vehicle being
used, the programme will be deactivated.
(Depending on country of sale)
Programming can be carried out from a
smartphone using the MYPEUGEOT APP
application.
For more information on Remote functions,
refer to the corresponding section.
5. Storage compartment or Storage
compartment with flap or Wireless
smartphone charger with flap (depending on
version)
► Press the top centre of the flap to open it.
6. Storage compartment with 12 V accessory
socket
7. Cup holder
8. Adjustable centre armrest with storage
compartment
With PEUGEOT Connect Nav system
In the Climate > OPTIONS menu:
Select Temperature conditioning.
Rear USB socket(s) (depending on version)
► Press + to add a programme.
► Select the time of entry into the vehicle and
the desired days. Press OK.
► Press ON to activate this programme.
Make sure you do not leave any item in
the passenger compartment which could
50
Ease of use and comfort
act like a magnifying glass under the effect of
the sun's rays and cause a fire - risk of fire or
damage to interior surfaces!
CarPlay®, enabling certain smartphone
applications to be used on the touch screen.
For best results, use a cable made or approved
by the device manufacturer.
These applications can be managed using the
steering-mounted controls or the audio system
controls.
The connection of an electrical device
not approved by PEUGEOT, such as a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio reception or
interference with displays in the screens.
3
Sun visor
► With the ignition on, raise the concealing
flap; depending on the version, the mirror is
illuminated automatically.
This sun visor is also equipped with a ticket
holder.
FOCAL® Hi-Fi system
When the USB socket is used, the
portable device charges automatically.
While charging, a message is displayed if the
power drawn by the portable device exceeds
the current supplied by the vehicle.
For more information about how to use this
equipment, refer to the sections describing
the audio and telematics systems.
The vehicle is equipped with a high-fidelity
acoustic system from the French brand FOCAL®.
10 speakers incorporating exclusive FOCAL®
technologies offer the pleasure of pure and
detailed sound inside the vehicle:
Glove box
► To open the glove box, lift the handle.
– Polyglass technology central speaker/mid-
range satellite speakers: sound immersion and
spatialisation.
– Polyglass technology woofers/mid-ranges with
high excursion: balance, dynamics and precision
of sound.
– Aluminium TNF inverted dome tweeter:
optimal sound dispersion, detailed treble.
– 12-way active amplification - 515 Watts Hybrid
Class AB/Class D technology: breadth and
finesse in the high frequency signals, as well as
real power in the bass.
Never drive with the glove box open
when a passenger is at the front. It may
cause injury during sharp deceleration!
12 V accessory socket
USB sockets
– Subwoofer with high excursion Power
FlowerTM triple coil technology: deep and
controlled reproduction of low frequencies.
► Plug in a 12 V accessory (with a maximum
rated power of 120 W) using a suitable adapter.
USB sockets allow the connection of a portable
device.
The USB socket at the front on the
right-hand side also allows a
smartphone to be connected by Android Auto® or
Observe the maximum power rating to
avoid damaging the accessory.
For optimum sound reproduction, it is
recommended that you put the boot floor
in the high position (depending on version).
51
Ease of use and comfort
► With the charging area clear, place a device
in its centre.
The other mats are simply laid over the carpet.
Wireless smartphone
charger
Removing/refitting
The system is not designed to charge
multiple devices simultaneously.
► To remove it on the driver's side, move the
seat backwards and unclip the fasteners.
► To refit it, position the mat and secure it by
pressing down.
► Check that the mat is secured correctly.
To avoid any risk of jamming the pedals:
– Only use mats which are suited to the
fixings already present in the vehicle; these
fixings must be used.
– Never fit one mat on top of another.
The use of mats not approved by PEUGEOT
may interfere with access to the pedals and
hinder the operation of the cruise control/
speed limiter.
Do not leave any metal objects (coins,
keys, vehicle remote control, etc.) in the
charging area while a device is being
charged, due to the risk of overheating or
interrupting the charging process.
This system allows wireless charging of a
portable device such as a smartphone, using the
magnetic induction principle, in accordance with
the Qi 1.1 standard.
The portable device to be charged must be
compatible with the Qi standard, either by design
or by using a compatible holder or shell.
A mat can also be used provided that it is
approved by the Manufacturer.
Mats
The approved mats have two fasteners
located underneath the seat.
Fitting
The charging area is identified by the Qi symbol.
The charger works with the engine running and
with the Stop & Start system in STOP mode.
Charging is managed by the smartphone.
With the Keyless Entry and Starting system, the
charger’s operation may be briefly disrupted
when a door is opened or the ignition is switched
off.
Charging
► Open the flap to access the charging area.
When fitting it on the driver's side, only use
the mountings present on the carpet (a "click"
indicates proper locking).
52
