Deutsch
EnglishEase of use and comfort -> Front seats for your Peugeot 2008 2019-2025
Ease of use and comfort
Before moving the seat backwards,
ensure that there is no person or object
that might prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or of
jamming the seat if large objects are placed
on the floor behind the seat.
The head restraint is correctly adjusted
when its upper edge is level with the top
of the occupant's head.
PEUGEOT i-Cockpit
Removing a head restraint
► Pull the head restraint fully up.
► Press lug A to release the head restraint and
raise it fully.
► Stow the head restraint securely.
Front seats
Refitting a head restraint
Front head restraints
► Insert the head restraint rods into the guides
in the corresponding seat backrest.
► Push the head restraint fully down.
► Press the lug A to release the head restraint
and push it down.
Before taking to the road and to make the
most of the ergonomic layout of the PEUGEOT
i-Cockpit, carry out these adjustments in the
following order:
Adjusting the height
► Adjust the height of the head restraint.
– head restraint height.
– seat backrest angle.
– seat cushion height.
– longitudinal seat position.
Never drive with the head restraints
removed; they should be in place and
adjusted for the occupant of the seat.
– steering wheel reach and then height.
– rear view mirror and door mirrors.
Manually-adjustable seats
Once these adjustments have been
made, check that the "head-up"
instrument panel can be viewed correctly over
the smaller diameter steering wheel.
Upwards:
Longitudinal
► Pull the head restraint up to the desired
position; you can feel the head restraint clicking
into position.
Downwards:
► Press lug A to lower the head restraint.
40
Ease of use and comfort
► Raise the control bar and slide the seat
forwards or backwards.
► Release the control bar to lock the seat in
position on one of the notches.
Electrically-adjustable seats Electric lumbar adjustment
3
Longitudinal
Backrest angle
► Press the + or - control to obtain the desired
lumbar support.
► Push the control forwards or backwards to
slide the seat.
Massage function
(Driver’s seat only)
► Turn the knob to obtain the desired angle.
Backrest angle
Height
► Tilt the control forwards or rearwards.
This function provides lumbar massage; it only
operates when the engine is running as well as
in STOP mode of the Stop & Start system.
► Pull the control upwards to raise or push it
downwards to lower, until you obtain the position
required.
Cushion height and angle
Activation/Deactivation
► Press this button to activate/deactivate
the function.
Upon activation, the indicator lamp comes on.
The massage function is activated for a period
of one hour.
During this time, massage is performed in
6 cycles of 10 minutes (6 minutes of massage
followed by a 4-minute break).
► Tilt the rear of the control upwards or
downwards to obtain the required height and
angle.
41
Ease of use and comfort
After one hour, the function is deactivated; the
indicator lamp goes off.
consumption in turn decreases energy
consumption.
► Adjust the height and reach to suit your
driving position.
► Push the control to lock the steering wheel.
Heated seats
Prolonged use of heated seats is not
recommended for people with sensitive
skin.
For safety reasons, these adjustments
must only be carried out with the vehicle
stationary.
There is a risk of burns for people whose
perception of heat is impaired (e.g. illness,
taking medication).
To keep the heated pad intact and to prevent
a short circuit:
Mirrors
Door mirrors
– Do not place heavy or sharp objects on the
seat.
As a safety measure, the mirrors should
be adjusted to reduce the "blind spots".
The objects that you see in the mirrors are
in fact closer than they appear. Take this
into account in order to correctly judge the
distance of vehicles approaching from behind.
The function is active only with the engine
running and when the outside temperature is
below 20°C.
► Press the button corresponding to the seat.
► Each press changes the heating level; the
corresponding number of indicator lamps come
on.
► To switch off the heating, press the button
until all of the indicator lamps are off.
The system status is memorised when the
ignition is switched off.
– Do not kneel or stand on the seat.
– Do not spill liquids onto the seat.
– Never use the heating function if the seat
is damp.
Steering wheel
adjustment
Do not use the function when the seat
is not occupied.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function off; reducing electrical
► When stationary, pull the control to release
the steering wheel.
42
