Deutsch
EnglishQuick Reference Guide -> What to Do If for your Honda CR-V 2022-2025
What to Do If
Why does the brake pedal
pulsate slightly when
applying the brakes?
This can occur when the ABS activates and does not indicate a
problem. Apply firm, steady pressure on the brake pedal. Never
pump the brake pedal.
2 Anti-lock Brake System (ABS) (P557)
The rear door cannot be
opened from inside the
vehicle. Why?
Check if the childproof lock is in
the lock position. If so, open the
rear door with the outside door
handle.
To cancel this function, slide the
lever up to the unlock position.
Why do the doors lock
after I unlocked the doors?
If you do not open the doors within 30 seconds, the doors are
relocked automatically for security.
Why does the beeper
sound when I open the
driver’s door?
The beeper sounds when:
●
The exterior lights are left on.
●
The power mode is in ACCESSORY.
38
Why does a beeper sound
when I walk away from the
vehicle after I close the
door?
The beeper sounds if you move outside the walk away auto lock
operating range before the door completely closes.
2 Locking the doors and tailgate (Walk away auto lock®) (P158)
Why does the beeper
sound when I start driving?
The beeper sounds when the driver and/or front passenger are
not wearing their seat belts.
Pressing the electric
parking brake switch does
not release the parking
brake. Why?
Press the electric parking brake switch with the brake pedal
depressed.
●
Depressing the accelerator
pedal does not release the
parking brake
Fasten the driver’s seat belt.
Check if the transmission is in (P or (N. If so, select any other
position.
●
automatically. Why?
Why do I hear a screeching
sound when I apply the
brake pedal?
The brake pads may need to be replaced. Have your vehicle
inspected by a dealer.
39
I'm seeing an amber
indicator of a tire with an
exclamation point. What is
that?
The Tire Pressure Monitoring System (TPMS) needs attention. If
you recently inflated or changed a tire, you have to recalibrate
the system.
2 Tire Pressure Monitoring System (TPMS) (P493)
Why does the shift position
automatically change to (P
when I open the driver’s
door to check for parking
space lines when
• Fasten the driver’s seat belt.
• Close the driver’s door and manually change the shift
position.
2 When opening the driver’s door (P480)
reversing?
40
