Deutsch
EnglishMaintenance -> Checking and Maintaining Wiper Blades for your Honda CR-V 2022-2025
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and
the hard surfaces of the blade may scratch the window glass.
Changing the Front Wiper Blade Rubber
1Changing the Front Wiper Blade Rubber
1. Set the power mode to VEHICLE OFF.
2. While holding the wiper switch in the
MIST position, set the power mode to ON,
then to VEHICLE OFF.
NOTICE
Avoid dropping the wiper arm onto the windshield, it
may damage the wiper arm and/or the windshield.
u Both wiper arms are set to the
maintenance position as shown in the
image.
3. Lift the driver side wiper arm first, then the
passenger side.
Continued
601
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
4. Press up on and hold the tab, then slide
the holder off the wiper arm.
Tab
5. Pull the end of the wiper blade in the
direction of the arrow in the image until it
is out of the holder’s end cap.
Wiper
Blade
End Cap At
The Bottom
6. Pull the wiper blade in the opposite
Wiper Blade
direction to slide it out of the holder.
Holder
602
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
7. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
Wiper
Blade
8. Slide the holder onto the wiper arm, then
push down the lock tab.
9. Lower the passenger side wiper arm first,
then the driver side.
10. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
Holder
Cap
603
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
2. Pivot the bottom end of the holder up until
it comes off from the wiper arm.
1Changing the Rear Wiper Blade Rubber
Wiper Arm
NOTICE
Avoid dropping the wiper arm, it may damage the
rear window.
3. Slide the blade out of the holder.
Wiper Blade
4. Remove the retainers from wiper blade and
mount to a new rubber blade.
Retainer
604
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
5. Slide the new wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.
Holder
605
