Deutsch
EnglishHandling the Unexpected -> Power System Won't Start for your Honda CR-V 2022-2025
Power System Won’t Start
Checking the Procedure
When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2 If the 12-Volt Battery Is Dead P. 647
Checklist
Condition
The Temperature Is Too Cold For Vehicle To Operate
message appears.
The To Start, Hold Remote Near Start Button message
appears.
What to Do
2 Driver Information Interface Warning and
Information Messages P. 109
Check if the related
indicator or driver
information interface
messages come on.
2 If the Keyless Remote Battery is Weak
P. 645
uMake sure the keyless remote is in its operating range.
2 POWER Button Operating Range P. 186
The POWER SYSTEM indicator comes on.
The transmission system indicator blinks and Transmission
Problem. Apply Parking Brake When Parked message
appears.
Have your vehicle checked by a dealer.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 658
Check the brightness The interior lights are dim or do not come on at all.
Have the 12-volt battery checked by a dealer.
of the interior lights.
The interior lights come on normally.
Check all fuses, or have your vehicle checked by
a dealer.
2 Inspecting and Changing Fuses P. 662
Check the shift
position.
The transmission is not in (P.
Put the transmission into (P.
Check the
immobilizer system
indicator.
When the immobilizer system indicator is blinking, the power
system cannot be turned on.
2 Immobilizer System Indicator P. 101
644
uuPower System Won’t StartuIf the Keyless Remote Battery is Weak
If the Keyless Remote Battery is Weak
If the beeper sounds, the To Start, Hold Remote Near Start Button message
appears on the driver information interface, the POWER button flashes, and the
READY indicator does not come on, turn on the power system as follows:
1. Touch the center of the POWER button
with the H logo on the keyless remote while
the POWER button is flashing. The buttons
on the keyless remote should be facing you.
u The POWER button flashes for about 30
seconds.
2. Depress the brake pedal and press the
POWER button within 10 seconds after the
beeper sounds and the POWER button
changes from flashing to on.
u The READY indicator comes on.
u If you don’t depress the pedal, the mode
will change to ACCESSORY.
645
uuPower System Won’t StartuEmergency Power System Off
Emergency Power System Off
The POWER button may be used to turn the power system off due to an emergency
situation even while driving. If you must turn the power system off, do either of the
following operations:
• Press and hold the POWER button for about two seconds.
• Firmly press the POWER button three times.
1Emergency Power System Off
Do not press the POWER button while driving unless
it is absolutely necessary for the power system to be
turned off.
If you press the POWER button while driving, the
beeper sounds.
The steering wheel will not lock. However, because turning off the power system
disables the power assist the power system provides to the steering and braking
systems, it will require significantly more physical effort and time to steer and slow
the vehicle. Use both feet on the brake pedal to slow down the vehicle and stop
immediately in a safe place.
The transmission automatically changes to (P after the vehicle comes to a complete
stop. Then, the power mode changes to VEHICLE OFF.
646
