Deutsch
EnglishInstruments and Controls -> Seats for your Honda CR-V 2001-2005
Main Menu
Table of Contents
Seats
Seat Adjustments
See pages 11 － 13 for important safety
information and warnings about how to
properly position the seats and seat-
backs.
Make all seat adjustments before
you start driving.
FRONT SEAT
To adjust the front or rear seat
To change the seat-back angle of the
forward and backward, pull up on the front seat, pull up on the lever on the
bar under the seat cushion’s front
edge. Try to move the seat to make
sure it is locked in position.
outside of the seat bottom.
78
Main Menu
Table of Contents
Seats
Driver’s Seat Height Adjustment
Armrests
REAR SEAT
To change the angle of the rear seat-
back, pull up on the release lever on
the outside of the seat-back.
The height of the driver’s seat is
adjustable. Turn the dial on the
outside of the seat cushion.
The rear seat armrest is in the
center of the rear seat. Pivot it down
to use it.
When using the center seating
position, adjust the left and right side
of the rear seats to the same position.
Only on vehicles with an automatic
transmission
Each front seat has an armrest on
the side of the seat-back. To use it,
pivot it down.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
backs after you adjust the rear seats.
79
Main Menu
Table of Contents
Seats
Head Restraints
See page 13 for important safety
information and a warning about how to
properly position the head restraints.
Your vehicle is equipped with head
restraints in all seating positions to
help protect you and your
passengers from whiplash and other
injuries.
They are most effective when you
adjust them so the back of the
occupant’s head rests against the
center of the restraint.
REAR
RELEASE BUTTON
FRONT
RELEASE BUTTON
The head restraints adjust for height. To remove a head restraint for
You need both hands to adjust the
restraint. Do not attempt to adjust it
cleaning or repair, pull it up as far as
it will go. Push the release button,
while driving. To raise it, pull upward. then pull the restraint out of the seat-
To lower the restraint, push the
release button sideways, and push
the restraint down.
back.
Make sure the removed head
restraints are securely stored.
80
Main Menu
Table of Contents
Seats
Reclining the Front Seats
3. Adjust the front seats forward as
far as they will go. Pull up the seat-
back angle adjustment lever and
pivot the seat-back backward until
it is level with the rear seat
cushion.
4. Move the front seat backward
until it touches the rear seat.
5. Adjust the rear seat-back to the
desired position.
SLIDE BAR
SEAT-BACK ANGLE
Reverse this procedure to return the
front and rear seats to the upright
position. Make sure you install the
head restraints and securely lock the
seats before driving.
ADJUSTMENT LEVER
You can recline the seat-backs on the 2. Remove the head restraints from
front seats so they are level with the
rear seat cushions, making a large
cushioned area. To do this:
the front seats (see page 80).
Make sure the removed head
restraints are securely stored.
When you return the seat-back to
the upright position, hold the seat-
back to keep it from going up too
quickly.
1. Adjust the rear seats as far back
as they will go.
81
Main Menu
Table of Contents
Seats
Folding the Rear Seats Down
The rear seat-back can be folded
down to give more cargo room. Each
side folds down separately, so you
can still carry a passenger in the rear
seat.
You can also fold up each of the rear
seats separately to create further
cargo space (see page 83 ).
LATCH PLATE
RELEASE LEVER
When you are folding the right half
of the rear seat, use the key to
release the center seat belt from the
detachable anchor (see page 85 ).
Allow the seat belt to retract into the
holder on the ceiling and store the
buckles in it.
2. Lower the head restraint to its
lowest position.
3. Pull up on the release lever on the
outside of the seat-back.
4. Fold the seat-back forward.
Do not put any heavy items on the
seat-back when it is folded.
BUCKLE
1. Push the seat belt buckles into the
seat cushion.
82
Main Menu
Table of Contents
Seats
Reverse this procedure to return the
seat-back to the upright position.
Make sure the seat is secured and
the seat belt in front of the seat-back
before driving.
Folding the Rear Seat Up
LOCK RELEASE STRAP
SLIDE BAR
To fold up the rear seat:
3. Unlock the seat from the floor by
pulling the lock release strap
under the seat cushion’s back
edge, then lift the rear of the seat.
You cannot fold up the rear seat if
it is not latched securely in the
rearmost position.
1. Pull up the bar under the seat
cushion and slide the rear seat
will go.
2. Follow steps 1 through 4 on page
82 for folding down the seat-
back.
4. Slide the seat forward.
CONTINUED
83
Main Menu
Table of Contents
Seats
Reverse this procedure to return the
seat to the upright position.
Make sure the seat is securely
latched before driving.
When you are not using the
fastening strap, roll up the strap and
store it properly into the slit on the
seat-back.
HOOK
HOOK
Make sure all rear shoulder belts are
positioned in front of the rear seat-
backs.
FASTENING
STRAP
ANCHOR
In the center seating position of the
rear seat, be sure the detachable
anchor is latched securely before
Pull out the fastening strap from
the slit on the seat-back. Move the
front seat forward slightly, then
attach the anchor on the fastening
strap to the hook on the bottom of
the front seat. Adjust the front
seat to the desired position.
Make sure that the folded up rear
seat does not interfere with the front
passenger’s seat-back. This will
cause the front passenger’s weight
sensors to work improperly (see
page 25 ). Also check the passenger
airbag off indicator to assure proper
operation of the passenger’s
advanced front airbag.
5.
using the seat belt (see page ).
85
Make sure all items in the cargo area
are secured. Loose items can fly
forward and cause injury if you have
to brake hard (See
on page 150 ).
Carrying Cargo
6. Pull the fastening strap tab toward
the slit to tighten the strap, and
make sure the seat is secure.
84
