Deutsch
EnglishSeats -> Memory Function for your Ford Kuga 2019-2025
Seats
Recalling a Pre-Set Position
MEMORY FUNCTION
Press and release the memory button
associated with your desired driving
position. The memory features move to
the position stored for that preset.
Note: You can only recall a preset memory
position when you switch the ignition off, or
when the transmission is in park (P) or
neutral (N) (and your vehicle is not moving)
if you switch the ignition on.
WARNING: Before activating the
memory seat, make sure that the area
immediately surrounding the seat is clear
of obstructions and that all occupants
are clear of moving parts.
WARNING:Do not use the memory
function when your vehicle is moving.
You can also recall a preset memory
position by:
This function recalls the position of the
following:
•
•
Pressing the unlock button on your
intelligent access keyfob if it is linked
to a preset position.
•
•
Driver seat.
Power mirrors.
Unlocking the intelligent driver door
The memory control is on the driver door.
handle if a linked key fob is present.
Note: Using a linked key fob to recall your
memory position when the ignition is off
moves the seat to the Easy Entry position.
Note: Pressing any active memory feature
adjustment control (or any memory button)
during a memory recall cancels the
operation.
Linking a PreSet Position to your
Remote Control or Intelligent Access
Key Fob
You can save preset memory positions for
up to three remote controls or intelligent
access (IA) keys.
E142554
Saving a PreSet Position
1. Switch the ignition on.
1. With the ignition on, move the memory
positions to the desired positions.
2. Adjust the memory features to your
desired position.
2. Press and hold the desired preset
button for about five seconds. A tone
sounds after about two seconds.
Continue holding until you hear a
second tone.
3. Within three seconds, press the lock
button on the remote control you are
linking.
3. Press and hold the desired memory
button until you hear a single tone.
You can save up to three memory position
presets. You can save a memory preset at
any time.
160
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Seats
To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.
Note: If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key to initiate a memory recall.
Easy Entry and Exit Feature
If you enable the easy entry and exit
feature, it moves the driver seat position
rearward up to 5 cm (2 in) when you switch
the ignition off.
The driver seat returns to its previous
position when you switch the ignition on.
E159654
You can enable or disable this feature
With the seat empty, pull the lever up to
fold the seatback forward.
through the information display.
See Information Displays (page 110).
Note: Lower the head restraints. See Head
Restraints (page 155).
REAR SEATS
Folding the Seatback
Unfolding the Seatback
WARNING: When folding the
seatbacks up, make sure that the safety
belts are visible to an occupant and not
caught behind the seat.
WARNING: When folding the
seatbacks down, take care not to get
your fingers caught between the
seatback and seat frame.
WARNING: Make sure that the
seats and the seatbacks are secure and
fully engaged in their catches.
Recline Adjustment
With the seat occupied, pull the lever up
to recline the seat backward.
161
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
