Deutsch
EnglishMyKey -> Using MyKey With Remote Start Systems for your Ford Kuga 2019-2025
MyKey™
•
•
The key used to switch the ignition on
CHECKING MYKEY SYSTEM
STATUS - VEHICLES WITH: 6.5
INCH INSTRUMENT CLUSTER
DISPLAY SCREEN/12.3 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN
You can find information about the
distance traveled using a MyKey and also
the number of admin keys and MyKeys
created for your vehicle.
is the only admin key. There always has
to be at least one admin key.
The last MyKey was created without
switching the ignition off.
Why can I not program a MyKey?
•
•
•
The admin key is not inside your
vehicle.
The key used to switch the ignition on
is not an admin key.
No MyKeys are created. See Creating
a MyKey (page 49).
1. Switch the ignition on.
2. Press the menu button on the steering
wheel to enter the information display
main menu.
Why can I not clear the MyKeys?
•
•
•
The admin key is not inside your
vehicle.
3. Select Settings.
The key used to switch the ignition on
is not an admin key.
4. Select MyKey.
5. Select MyKey info.
No MyKeys are created. See Creating
a MyKey (page 49).
USING MYKEY WITH REMOTE
START SYSTEMS
Why does the MyKey distance not
accumulate?
MyKey is not compatible with non
•
•
•
•
The key used to start the engine is an
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
admin key.
An admin key and a MyKey are inside
your vehicle.
No MyKeys are created. See Creating
a MyKey (page 49).
MYKEY–TROUBLESHOOTING
The MyKeys have been cleared.
What is an admin key?
Why can I not start the engine with
a MyKey?
•
An admin key is a key that has not been
created as a MyKey. See Creating a
MyKey (page 49).
•
An admin key and a MyKey are inside
your vehicle.
Why can I not create a MyKey?
•
The admin key is not placed in the
backup position.
•
The key used to switch the ignition on
is not an admin key.
55
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
Doors and Locks
With the ignition off, press and hold both
LOCKING AND UNLOCKING
You can use the power door lock control
or the remote control to lock and unlock
your vehicle.
the lock and unlock buttons on the remote
control for three seconds to change
between driver door or all door unlock
mode. The direction indicators flash twice
to indicate a change to the unlocking
mode. Driver door mode only unlocks the
driver door when you press the unlock
button once. All door mode unlocks all
doors when you press the unlock button
once. The unlocking mode applies to the
remote control, keyless entry and keypad.
Note: Always take your keys and lock all
doors when leaving your vehicle.
Power Door Locks
The power door lock control is on the driver
and front passenger door panels.
To change these settings use the
touchscreen to select the following:
1. Press Settings.
2. Press Vehicle.
3. Press Locks.
Note: Depending on your vehicle options,
the vehicle settings may be accessed
through the instrument cluster display.
Locking the Doors
E196954
Press the button to lock all
doors. The direction indicators
flash.
A
B
Unlock.
Lock.
Press the button again within three
seconds to confirm that all the doors are
closed. The doors will lock again, the
direction indicators flash if all the doors
and the luggage compartment are closed.
Door Lock Indicator
An LED on the power door lock control
illuminates when you lock the door.
Mislock
Remote Control
If any door or the liftgate is open, or if the
hood is open on vehicles with an anti-theft
alarm or remote start, the horn will sound
twice and the direction indicators will not
flash.
Unlocking the Doors (Two-Stage
Unlock)
Press the button to unlock the
driver door.
Press the button again within
three seconds to unlock all doors. The
direction indicators flash.
56
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
