MyKey -> Creating a MyKey Vehicles With 4.2 Inch Instrument Cluster Display Screen for your Ford Kuga 2019-2025
MyKey™
Pre-collision assist and lane keeping alert
Audio System Volume Limit
turn on when you start the engine, but can
be switched off with a MyKey.
The audio system maximum volume is
reduced. A message appears in the
information display if you attempt to
exceed the volume limit. Automatic
volume control turns off.
A new destination in the navigation system
can only be set using voice commands,
when using a MyKey and your vehicle is
moving.
Emergency Assistance
If you set emergency assistance to be
always on, it cannot be switched off with
a MyKey.
Configurable Settings
You can configure the following settings
after creating a MyKey. See Creating a
MyKey (page 49).
Do Not Disturb
If you set do not disturb to be always on,
it cannot be switched off with a MyKey.
WARNING: Do not set MyKey
maximum speed limit to a limit that will
prevent the driver from maintaining a
safe speed considering posted speed
limits and prevailing road conditions. The
driver is always responsible to drive in
accordance with local laws and
Note: : If a phone is connected using Apple
CarPlay or Android Auto while driving with
a MyKey, the driver can receive phone calls
and text messages even if the do not disturb
restriction is on.
Traction Control
prevailing conditions. Failure to do so
could result in accident or injury.
If you set traction control to be always on,
it cannot be switched off with a MyKey.
You can set a speed limit for your vehicle.
Warning messages appear in the
information display and a tone sounds if
your vehicle reaches the set speed. You
cannot override the set speed when using
a MyKey.
CREATING A MYKEY -
VEHICLES WITH: 4.2 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN
Speed Reminder
1. Place an admin key in the backup
position.
You can set a speed reminder for your
vehicle. Warning messages appear in the
information display and a tone sounds if
your vehicle exceeds the set speed.
2. Switch the ignition on.
49
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
MyKey™
To create a MyKey, use the information display controls on the steering wheel to
select the following:
Menu Item
Action
Settings
Press the menu button.
MyKey
Press the OK button.
Create MyKey
Press and hold the OK button until a confirmation message
appears in the information display.
Switch the ignition off.
Note: We recommend that you label this
key.
MyKey Information Messages
Message
Description
Place key in backup loca- Displays when trying to create a MyKey and the key is not
tion
placed in the backup position.
Key is already a MyKey
Displays when trying to create a MyKey with a key already
designated as a MyKey.
Key restricted at next
start. Label this key
Displays to confirm that the key is restricted after you switch
the ignition off.
50
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
MyKey™
1. Remove the rubber mat.
CREATING A MYKEY -
VEHICLES WITH: 6.5 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN/12.3 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN
2. Place the admin key in the position
shown, with the buttons facing upward.
3. Switch the ignition on.
4. Press the menu button on the steering
wheel to enter the information display
main menu.
5. Select Settings.
6. Select MyKey.
7. Select Create MyKey.
8. Press and hold the OK button until a
confirmation message appears in the
information display.
1
9. Switch the ignition off.
Note: We recommend that you label this
key.
2
E264544
MyKey Information Messages
Message
Description
Place key in backup loca- Displays when trying to create a MyKey and the key is not
tion
placed in the backup position.
Key is already a MyKey
Displays when trying to create a MyKey with a key already
designated as a MyKey.
Key restricted at next
start. Label this key
Displays to confirm that the key is restricted after you switch
the ignition off.
Switch the ignition on using an admin key.
PROGRAMMING A MYKEY -
VEHICLES WITH: 4.2 INCH
INSTRUMENT CLUSTER
DISPLAY SCREEN
You can only program MyKeys to the same
settings.
51
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing
MyKey™
To program a MyKey, use the information display controls on the steering wheel
to select the following:
Menu Item
Settings
MyKey
Action
Press the menu button.
Press the OK button.
Select a setting and press the OK button.
Configure the setting.
Switch the ignition off.
52
Kuga (CTD) Vehicles Built From: 22-06-2021, CG3851en enGBR, Edition date: 202104, First-Printing





